|
US$349.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24973-2023: Toll barrier
Status: Valid GB/T 24973: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24973-2023 | English | 349 |
Add to Cart
|
4 days [Need to translate]
|
Toll barrier
| Valid |
GB/T 24973-2023
|
| GB/T 24973-2010 | English | 479 |
Add to Cart
|
3 days [Need to translate]
|
Toll electric barrier
| Obsolete |
GB/T 24973-2010
|
PDF similar to GB/T 24973-2023
Basic data | Standard ID | GB/T 24973-2023 (GB/T24973-2023) | | Description (Translated English) | Toll barrier | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P66 | | Classification of International Standard | 03.220.20; 93.080.30 | | Word Count Estimation | 18,172 | | Date of Issue | 2023-09-07 | | Date of Implementation | 2024-01-01 | | Older Standard (superseded by this standard) | GB/T 24973-2010,GB/T 24974-2010 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 24973-2023: Toll barrier---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 03.220.20;93.080.30
CCSP66
National Standards of People's Republic of China
Replace GB/T 24973-2010, GB/T 24974-2010
Toll railing
Tolbarrier
Published on 2023-09-07
2024-01-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅠ
1 Scope 1
2 Normative reference documents 1
3 Terms and Definitions 1
4 Classification, composition and model 2
5 Technical requirements 3
6 Test method 7
7 Inspection Rules 11
8 Marking, packaging, transportation and storage12
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document replaces GB/T 24973-2010 "Electric Railings for Toll Collection" and GB/T 24974-2010 "Manual Railings for Toll Collection". Book
The document is mainly based on GB/T 24973-2010 and incorporates all technical contents of GB/T 24974-2010.With GB/T 24973-2010
In comparison, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) Changed the definition of electric handrails (see 3.1,.2010 version of 3.1);
b) Delete the terms and definitions of control switches (see 3.2 of the.2010 edition);
c) The terms and definitions of stalled rotor status are deleted (see 3.3 of the.2010 edition);
d) The classification has been changed (see 4.1, 4.1 of the.2010 version);
e) The model has been changed (see 4.2, 4.2 of the.2010 version);
f) The ambient temperature has been changed, and S1 level, S2 level and J level have been added (see 5.1.1.2, 5.1.2 of the.2010 version);
g) The anti-corrosion requirements for materials have been changed (see 5.1.2, see 5.16 of the.2010 edition);
h) Deleted the deflection requirements for railing arms (see 5.3.2 of the.2010 edition);
i) Changed the railing arm length requirements (see 5.1.3.2, 5.3.3 of the.2010 edition);
j) Changed the appearance quality requirements (see 5.1.4.5, 5.17.4 of the.2010 version);
k) Changed the control requirements (see 5.1.5, 5.4 of the.2010 version);
l) Changed the opening and closing time requirements (see 5.1.7, 5.6 of the.2010 version);
m) Changed the anti-collision requirements (see 5.1.10, 5.9 of the.2010 version);
n) The requirements for protection against electric shock have been changed (see 5.1.13.4, 5.12.4 of the.2010 edition);
o) Changed the high temperature resistance performance requirements (see 5.1.15.1, 5.14.1 of the.2010 edition);
p) Changed the low temperature resistance performance requirements (see 5.1.15.2, 5.14.2 of the.2010 edition);
q) Added technical requirements for manual railings (see 5.2);
r) Test methods with added control requirements (see 6.1.5);
s) The test method for opening and closing time has been changed (see 6.1.7, 6.7.2 of the.2010 edition);
t) Added test method for self-test function (see 6.1.12);
u) Added test methods for protection against electric shock (see 6.1.13.4).
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed and coordinated by the National Traffic Engineering Facilities (Highway) Standardization Technical Committee (SAC/TC223).
This document was drafted by. Highway Science Institute of the Ministry of Transport, Zhonglu Hi-Tech Traffic Inspection, Inspection and Certification Co., Ltd., National Traffic Safety
Full facility quality inspection and testing center.
The main drafters of this document. Sun Yue, Li Hongqin, Zhang Jie, Fang Zhengpeng, Zou Kai, Zhang Ziyu, Fu Qiongni, Zhang Meng, Zhang Yi, Chu Chengzan, Liu Qi,
Ren Juan, Zhong Fei, Yang Haoran, Wang Jing.
The previous versions of this document and the documents it replaces are as follows.
---First published as GB/T 24973-2010 in.2010;
---This is the first revision and incorporates the contents of GB/T 24974-2010 "Manual Railings for Toll Collection".
Toll railing
1 Scope
This document stipulates the classification, composition and model, technical requirements, test methods, inspection rules, marking, packaging and transportation of toll railings.
Transmission and storage.
This document applies to the production, use and inspection of road toll railings.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
GB/T 191 Packaging, storage and transportation pictorial mark
GB/T 2423.1 Environmental testing of electrical and electronic products Part 2.Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing of electrical and electronic products Part 2.Test methods Test B. High temperature
GB/T 2423.3 Environmental testing Part 2.Test method Test Cab. Constant humidity and heat test
GB/T 2423.10 Environmental testing Part 2.Test method Test Fc. Vibration (sinusoidal)
GB/T 2423.17 Environmental testing of electrical and electronic products Part 2.Test methods Test Ka. Salt spray
GB/T 2423.22 Environmental testing Part 2.Test method Test N. Temperature change
GB 2893 safety color
GB/T 3681 Natural sunlight weathering of plastics, sunlight weathering after glass filtration and accelerated sunlight weathering of Fresnel mirrors
Exposure test methods
GB/T 4208-2017 Shell protection level (IP code)
GB/T 4942-2021 Protection level (IP code) classification of the overall structure of rotating electrical machines
GB/T 17626.2 Electromagnetic compatibility test and measurement technology electrostatic discharge immunity test
GB/T 17626.3 Electromagnetic compatibility testing and measurement technology Radio frequency electromagnetic field radiation immunity test
GB/T 17626.4 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test
GB/T 18226 Technical conditions for anti-corrosion of steel components in highway traffic engineering
GB/T 22040 Weather resistance requirements and test methods for plastic products for facilities along highways
JT/T 495 Sampling method for quality inspection of highway traffic safety facilities
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
electric barrier electricbarrier
Mechanical equipment that releases or blocks vehicles by controlling the motor to drive the railing arm to rotate around a specific axis.
3.2
manualbarriermanualbarrier
A mechanical device that manually moves the railing arm to rotate horizontally or vertically around a specific axis to release or block vehicles.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24973-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 24973-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24973-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24973-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 24973-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24973-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|