|
US$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24855-2010: Grain and oil machinery -- General technical specification for assembling
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24855-2010 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Grain and oil machinery -- General technical specification for assembling
| Valid |
GB/T 24855-2010
|
PDF similar to GB/T 24855-2010
Basic data | Standard ID | GB/T 24855-2010 (GB/T24855-2010) | | Description (Translated English) | Grain and oil machinery -- General technical specification for assembling | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | X91 | | Classification of International Standard | 67.260 | | Word Count Estimation | 8,874 | | Date of Issue | 2010-06-30 | | Date of Implementation | 2011-01-01 | | Quoted Standard | GB/T 191; GB/T 491; GB/T 492; GB/T 3768; GB/T 24854; JB/T 9876 | | Regulation (derived from) | National Standard Approval Announcement 2010 No.2 (Total No.157) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the general technical requirements for grain and oil machinery and product assembly, typical component assembly requirements, whole assembly requirements and test methods, inspection rules and signs, packaging, transport and storage. This standard applies to the whole assembly parts assembly and Agri machinery products. | GB/T 24855-2010: Grain and oil machinery -- General technical specification for assembling---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Grain and oil machinery.General technical specification for assembling
ICS 67.260
X91
National Standards of People's Republic of China
General technical requirements grain and oil machinery assembly
Issued on. 2010-06-30
2011-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
The standard proposed by the National Food Authority.
This standard by the National Standardization Technical Committee OILS.
Drafting of this standard. National Research and Design Institute of Zhengzhou Grain Reserve.
The main drafters of this standard. Wang Rong, Zhang Zhuoqing.
General technical requirements grain and oil machinery assembly
1 Scope
This standard specifies the technical requirements of the general assembly of grain and oil machinery products, the typical member assembly requirements, the whole assembly requirements and test side
Method, inspection rules and signs, packaging, transportation and storage.
This standard applies to the component mounting assembly whole grain and oil machinery and products.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs
GB/T 491 calcium-based grease
GB/T 492 sodium based grease
GB/T 3768 Determination of sound pressure of sound power levels of noise sources using an enveloping surface reflectance measuring surface Simple Method
GB/T 24854 grain and oil machinery products packaging technology
JB/T 9876 Metal Cutting Machine topcoat color combination test and evaluation method
3 General Technical Requirements
3.1 should be product design and related technical documents assembled, and in accordance with the provisions of this standard.
3.2 assembly of parts and components shall be inspected by the inspection department.
Purchased 3.3 out parts should have to demonstrate compliance with quality requirements, acceptance of qualified before use.
3.4 prior to assembly, parts assembly to deal with the size of the check.
3.5 prior to assembly, all parts should be removed burr surface, burrs, chips, oil, rust. Inside the box should be cleaned.
3.6 parts before assembly of sharp corners, sharp edges should be inverted blunt (shear blade and other parts except for special requirements).
Pads 3.7 parts before assembly should be used during processing, and the processing of solder boss residual portion removed, and relief grinding smooth.
3.8 mating surfaces of the parts and the relative motion of the surface should not affect the performance of the damage. When assembled, the parts cooperating surface
Should be cleaned and coated with a clean lubricant (grease).
3.9 In the assembly process should not damage the surface of the part or the parts deformation.
3.10 assembly, the edges should be trimmed to a variety of sump smooth rounded corners. Shovel into the sump should tick through the center hole.
3.11 Lubrication line ministries and mechanical piping and pneumatic components, should be cleared of obstructions within the tube, and clean. There should be no obvious cracks and wall
Dent, distortion, flattening and other defects.
3.12 length of spring should remain free, should not be lengthened or shortened.
3.13 should not put any pads or casement drawings or technical documents are not provided.
3.14 kinds of pressure, flow, speed, angle and distance adjustment mechanism, shall be according to design requirements to ensure its adjustment range, and should be accurate positioning,
Clear display, flexible and reliable.
4 Assembly fixed connection
4.1 screws, bolts connected
4.1.1 screws, bolts and nuts should be tightened using the wrench should not be used to combat. After tightening the screws, nuts and bolts head should
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24855-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 24855-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24855-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24855-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|