|
US$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24421.3-2023: Guidelines for standardization of organizations in service sector - Part 3: Preparation of standards
Status: Valid GB/T 24421.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24421.3-2023 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Guidelines for standardization of organizations in service sector - Part 3: Preparation of standards
| Valid |
GB/T 24421.3-2023
|
| GB/T 24421.3-2009 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Guidelines for standardization of organizations in service sector -- Part 3: Drafting of standards
| Obsolete |
GB/T 24421.3-2009
|
PDF similar to GB/T 24421.3-2023
Basic data | Standard ID | GB/T 24421.3-2023 (GB/T24421.3-2023) | | Description (Translated English) | Guidelines for standardization of organizations in service sector - Part 3: Preparation of standards | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A00 | | Classification of International Standard | 03.080.01 | | Word Count Estimation | 18,173 | | Date of Issue | 2023-03-17 | | Date of Implementation | 2023-03-17 | | Older Standard (superseded by this standard) | GB/T 24421.3-2009 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 24421.3-2023: Guidelines for standardization of organizations in service sector - Part 3: Preparation of standards
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS03:080:01
CCSA00
National Standards of People's Republic of China
Replace GB/T 24421:3-2009
Guidelines for standardization work of service industry organizations
Part 3: Standardization
Released on 2023-03-17
2023-03-17 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Demand Analysis 1
5 Drafting 2
5:1 General principles 2
5:2 Standard name and structure 2
5:3 Compilation of elements 3
6 Comments for 6
7 Technical Review 6
8 Review 6
Appendix A (Informative) Service Requirement Writing Example 8
Reference 12
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document is part 3 of GB/T 24421 "Guidelines for Standardization Work of Service Industry Organizations": GB/T 24421 has issued the following
part:
--- Part 1: General;
--- Part 2: Standard system construction;
--- Part 3: Standard preparation;
--- Part 4: Standard implementation and evaluation;
--- Part 5: Improvements:
This document replaces GB/T 24421:3-2009 "Guidelines for Standardization Work of Service Industry Organizations Part 3: Standard Writing", and
Compared with GB/T 24421:3-2009, except for structural adjustment and editorial changes, the main technical changes are as follows:
--- Added the chapter "Requirements Analysis" (see Chapter 4);
--- Factors to be considered when writing "standard name" and "scope" are added (see 5:2:1, 5:3:1);
---Changed the standard core technical element "writing of service requirements" (see 5:3:2, Chapter 5 of the:2009 edition), and changed the "service specification"
For "service quality" (see 5:3:2:1, 5:1 of the:2009 edition), adjust "service provision specification" and "personnel qualification" to "service process"
"Service personnel and positions" (see 5:3:2:2, 5:3:2:3, 5:2, 5:3 of the:2009 edition);
--- Added factors to be considered when writing "service evaluation and improvement" (see 5:3:2:8);
--- Added the chapter "Soliciting opinions" (see Chapter 6);
--- Added the chapter "Technical Review" (see Chapter 7);
--- Increased "Review" chapter (see Chapter 8):
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed and managed by the National Service Standardization Technical Committee (SAC/TC264):
This document was drafted by: Liaoning Institute of Standardization, Shenyang Market Supervision Service Center (Shenyang Institute of Standardization), Liaoning
Provincial Market Supervision Administration, Liaoning Longyuan University Logistics Management Co:, Ltd:
The main drafters of this document: Zheng Huaihai, Han Xianyi, Gou Ying, Li Huanan, Li Yifeng, Zheng Qijing, Qiu Xuesi, Yan Xuejiao, Liu Xiaokai:
The release status of previous versions of this document and the documents it replaces are as follows:
---First published as GB/T 24421:3-2009 in:2009;
--- This is the first revision:
Introduction
The standardization work of service industry organizations is that service industry organizations establish a satisfactory
To meet the organization's vision, mission, values and strategic needs of the standard system, formulate relevant standards, and through the operation of the standard system, the implementation of standards
It is a standardization activity for continuous improvement and improvement through application and evaluation: GB/T 24421 is proposed to consist of five parts:
--- Part 1: General: The purpose is to provide guidance for the standardization work of service industry organizations:
--- Part 2: Construction of the standard system: The purpose is to provide guidance for the establishment of the standard system of service industry organizations:
--- Part 3: Standard preparation: The purpose is to provide guidance for the establishment of standards for service industry organizations:
--- Part 4: Standard implementation and evaluation: The purpose is to provide guidance for the implementation and evaluation of service industry organization standards:
--- Part 5: Improvements: The purpose is to provide guidance for the improvement of the standardization work of service industry organizations:
One of the standardization work of service industry organizations is to prepare high-quality standardization documents: This revision to GB/T 24421:3 focuses on
This paper considers each stage of the standard preparation process of service industry organizations, and gives the stages of standard requirement analysis, drafting, soliciting opinions, technical review and review:
The factors that need to be considered in the paragraph, the factors that need to be considered in the preparation of each element of the service standard are given in the drafting, while other function type standards can be based on
Drafting of relevant parts of GB/T 20001 (all parts): Make standards development work for service industry organizations by providing advice on the standards development process
Evidence-based, improve the quality and application efficiency of standardized documents, guarantee the quality of services provided, and enhance the recognition of service industry organizations by relevant parties:
At the same time, improve economic and social benefits, and promote the sustainable development of service industry organizations:
Guidelines for standardization work of service industry organizations
Part 3: Standardization
1 Scope
This document provides guidance and suggestions for the preparation of standards for service industry organizations, and provides guidelines for standard requirements analysis, drafting, soliciting opinions, and technical review:
Factors to be considered at each stage of standard preparation such as inspection and review:
This document applies to the preparation of standards for service industry organizations:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 1:1 Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents
GB/T 20001 (all parts) standard writing rules
Drafting of specific content in GB/T 20002 (all parts)
GB/T 24421:1 Guidelines for standardization work of service industry organizations Part 1: General principles
GB/T 24421:2 Guidelines for standardization work of service industry organizations Part 2: Construction of standard system
GB/T 24620 Service Standards Formulation Guidelines Considering Consumer Needs
GB/T 28222 General Rules for Writing Service Standards
3 Terms and Definitions
The terms and definitions defined in GB/T 20001:1 and GB/T 24421:1 apply to this document:
4 Demand Analysis
The formulation and revision plan of service industry organization standards shall be based on the suggestions and information on the construction of the standard system given in GB/T 24421:2:
In line with the organization's service items and work needs, analyze the status quo of standards, and fully consider the latest technology (service) level and current market conditions:
Needs analysis should be carried out in a targeted manner according to different categories of the standard system:
a) Service general basic standard system: standardization work standards need to be analyzed according to the standardization management activities of the organization; terminology
and abbreviations, symbols and signs, numerical data and quantities and units, measurement standards, service industry organizations can directly adopt national standards or root
Develop and revise standards applicable to the Organization as necessary:
b) Service provision standard system: service realization standards, operation management standards, service evaluation and improvement standards need to be based on the organization's service
The management mode of project and service provision conducts demand analysis:
c) Service guarantee standard system: The service guarantee standard needs to be analyzed according to the relevant management system documents of the organization: if any
If there is no relevant document, it can be converted into a standard; if there is no relevant document, the standard formulation and revision will be proposed according to the management requirements of supporting services, etc:
plan:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24421.3-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 24421.3-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24421.3-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24421.3-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 24421.3-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24421.3-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|