|
US$334.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2423.64-2023: Environmental testing - Part 2: Test methods - Test Fj: Vibration - Long time history replication
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 2423.64-2023 | English | 334 |
Add to Cart
|
3 days [Need to translate]
|
Environmental testing - Part 2: Test methods - Test Fj: Vibration - Long time history replication
| Valid |
GB/T 2423.64-2023
|
PDF similar to GB/T 2423.64-2023
Basic data | Standard ID | GB/T 2423.64-2023 (GB/T2423.64-2023) | | Description (Translated English) | Environmental testing - Part 2: Test methods - Test Fj: Vibration - Long time history replication | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K04 | | Classification of International Standard | 19.040 | | Word Count Estimation | 18,18 | | Date of Issue | 2023-09-07 | | Date of Implementation | 2024-04-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 2423.64-2023: Environmental testing - Part 2: Test methods - Test Fj: Vibration - Long time history replication
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 19.040
CCSK04
National Standards of People's Republic of China
Environmental testing Part 2.Test methods
Test Fj. Reproduction of long-term vibration history
Published on 2023-09-07
2024-04-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅠ
Introduction II
1 Scope 1
2 Normative reference documents 1
3 Terms and Definitions 2
4 Test requirements 3
5 Severity level 4
6 Preprocessing 4
7 Initial detection and functional detection 4
8 Test 4
9 restore 6
10 Final inspection and functional inspection 6
11 Information that should be given about the specification6
12 Information that should be given in the test report7
Appendix A (informative) Guideline 8
Appendix NA (informative) GB/T 2423 constituent documents 12
Reference 15
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is Part 64 of GB/T 2423.The published parts of GB/T 2423 are shown in Appendix NA.
This document is equivalent to IEC 60068-2-85.2019 "Environmental Testing Part 2-85.Test Test Fj. Vibration Long Time History
Process Reappearance".
This document has made the following minimal editorial changes.
a) In order to coordinate with the existing standards, the name of the standard is changed to "Environmental Testing Part 2.Test Method Test Fj. Vibration for a long time
"Reappearance of the Process";
b) Added informative appendix NA "Constituting Documents of GB/T 2423".
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed and coordinated by the National Standardization Technical Committee on Environmental Conditions and Environmental Testing of Electrical and Electronic Products (SAC/TC8).
This document was drafted by. Beijing University of Aeronautics and Astronautics, Beijing Institute of Intensity Environment, Jiangsu Ruilan Automation Equipment Group Co., Ltd., National
Kegongsoft (Suzhou) Technology Co., Ltd., Guangdong Laibotong Test Equipment Co., Ltd., the Fifth Research Institute of Electronics of the Ministry of Industry and Information Technology, Beijing Satellite
Star Environmental Engineering Research Institute, Hangzhou Yiheng Technology Co., Ltd., Guangzhou University, Xi'an Guangqi Technology Co., Ltd.
The main drafters of this document. Wu Sa, Wei Bingfeng, Zhang Jungang, Xie He, Ye Jianhua, Xu Zhonggen, Wang Weihua, Chen Yunbin, Li Shengfeng, Huang Liansheng,
Shen Xiaoyuan.
Introduction
Vibration environment is the most basic and common mechanical environment. Depending on the characteristics of the vibration environment, GB/T 2423 "Environmental Test No.
Part 2.Test Methods" series of standards provide a variety of vibration test methods, such as GB/T 2423.10 [Test Fc. Vibration (Sinusoidal)] for
Periodic vibration of longer duration, GB/T 2423.48 (Test Ff. Vibration time history and sinusoidal beat frequency method) is for shorter duration
Transient vibration, GB/T 2423.56 (Test Fh. Broadband Random Vibration and Guidelines) is aimed at steady-state random vibration of longer duration,
GB/T 2423.58 (Test Method Test Fi. Vibration Mixed Mode) is aimed at superimposing sinusoidal or narrowband random on a broadband random background.
mixed vibration signal. Their use is generally recommended when the dynamic vibration environment to which the sample is subjected can be covered by these test methods. about how
To estimate the dynamic vibration environment of the sample and select the appropriate test method based on this, please refer to GB/T 2424.26 "Electrical and Electronic Products Environmental Protection
Environmental Testing Part 3.Supporting Documents and Guidelines for Vibration Test Selection.
When components, equipment and other products are likely to experience vibrations of a nature that cannot be covered by the above vibration test methods, this specification
The document presents a method for digitally controlled vibration testing based on a defined time history, which should be of long duration.
time. Compared with most other vibration test methods, the test method given in this document is by specifying a definite time domain history signal.
to define vibration requirements, so that when formulating relevant specifications, vibration conditions can be stipulated more flexibly according to specific situations, and in addition to testing
Apart from the technical limitations of the test equipment, there are almost no restrictions on the vibration characteristics. Because of this, it is difficult to give a test severity level in a single form
and tolerance requirements. Conducting long-term history reproduction testing always requires a high degree of engineering judgment on the part of users and specifiers, and requires
The specification preparer selects test procedures, test time histories and severity levels, tolerances, and analyzes appropriate to the sample and its intended use.
method.
Environmental testing Part 2.Test methods
Test Fj. Reproduction of long-term vibration history
1 Scope
The vibration test methods provided in this document are used to verify that the sample is subjected to a time history (long time history reproduction) to define the test requirements.
The ability to withstand dynamic loads without unacceptable functional and/or structural integrity degradation during specified vibration tests. these times
The history can be from actual measurement records or artificially generated. For both cases, this test method is performed for very specific applications
Experimental tailoring offers the possibility.
A typical application of this method is when the motion characteristics of the transient deterministic vibration, periodic vibration or random vibration test required are very specific.
In particular, other test standards cannot cover situations, including the inability to use the classic impact of IEC 60068-2-27 or the impact of IEC 60068-2-81.
Shock response spectrum, or periodic sinusoidal vibration according to IEC 60068-2-6, or Gaussian or non-Gaussian (kurtosis) broadband random according to IEC 60068-2-64
vibration to fully characterize the time history. Of course, users also understand that the time history used to reproduce a long-term history is deterministic, and any
The simulation of a random vibration is approximated using quasi-randomness.
In addition, this test method may be mixed with other methods in order to produce a time history that can characterize the desired signal. In this case
The next test will be very complicated.
The purpose of this test is different from IEC 60068-2-57.The purpose of IEC 60068-2-57 is mainly to use the synthetic time history to analyze transient vibration
Move to evaluate. The long-term history reproduction test mainly uses the actual time history measured in the real environment to conduct durability tests and functional tests.
Can test. It can also be used as a way to simulate non-Gaussian time histories.
This document is intended for use with samples that experience vibrations of very specific nature during transportation or use, such as aircraft, spacecraft or ground vehicles.
products in the vehicle. It is mainly used for samples without packaging, as well as samples with transport packaging, whose packaging is part of the sample itself.
Of course, for samples with packaging, the sample is regarded as a product, and the sample and its packaging are regarded as a sample. For packaged products
For product testing, this document is used in conjunction with GB/T 2423.43-2008.
Although this document mainly applies to electrical and electronic products, it is not limited to this and also applies to products in other fields (see Appendix A).
This document applies to single-axis excitation.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
IEC 60068-2-6 Environmental testing Part 2-6.Test method Test Fc. Vibration (sinusoidal) [Environmental
Note. GB/T 2423.10-2019 Environmental testing Part 2.Test method Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.2007, IDT)
IEC 60068-2-47 Environmental testing Part 2-47.Test methods Installation of test pieces for vibration, impact and similar dynamic tests
dynamictests)
Note. GB/T 2423.43-2008 Environmental testing of electrical and electronic products Part 2.Test methods Safety of vibration, impact and similar dynamic test samples
Installation (IEC 60068-2-47.2005, IDT)
IEC 60068-2-64 Environmental testing Part 2-64.Test methods Test Fh. Broadband random vibration and guidelines (Environ-
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2423.64-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 2423.64-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 2423.64-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2423.64-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|