HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 2423.25-2008 English PDF

US$559.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2423.25-2008: Environmental testing - Part 2: Test methods - Test Z/AM: Combined cold / low air pressure tests
Status: Obsolete

GB/T 2423.25: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 2423.25-2008English559 Add to Cart 3 days [Need to translate] Environmental testing - Part 2: Test methods - Test Z/AM: Combined cold / low air pressure tests Obsolete GB/T 2423.25-2008
GB/T 2423.25-1992English279 Add to Cart 3 days [Need to translate] Basic environmental testing procedures for electric and electronic products - Test Z/AM: combined cold / low air pressure tests Obsolete GB/T 2423.25-1992

PDF similar to GB/T 2423.25-2008


Standard similar to GB/T 2423.25-2008

GB/T 2423.27   GB/T 2423.23   GB/T 2423.24   GB/T 2423.21   GB/T 2423.34   GB/T 2423.17   

Basic data

Standard ID GB/T 2423.25-2008 (GB/T2423.25-2008)
Description (Translated English) Environmental testing - Part 2: Test methods - Test Z/AM: Combined cold / low air pressure tests
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K04
Classification of International Standard 19.040
Word Count Estimation 14,148
Date of Issue 2008-12-30
Date of Implementation 2009-10-01
Older Standard (superseded by this standard) GB/T 2423.25-1992
Regulation (derived from) Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies thermal and non- thermal test sample temperature (temperature gradient or mutation) and low air pressure tests, see 8. 2. 2 and 8. 2. 8. Purpose of this test is to determine the components, equipment and other products for its storage and use of low-temperature encountered low pressure integrated environmental adaptability. The comprehensive test is usually only a single environment in the test sample tests do not reveal the use of integrated environmental impact. Test procedures prescribed in this section apply only to the test temperature stabilization can be achieved during a test sample. The test method specified in this section can only test a heat test sample. This test procedure is applicable to pressure greater than 1kPa pressure test. When the air pressure is less than or equal to 1kPa, may not consider the contents of the test procedure. This section does not specify the height, pressure and temperature. See the special relationship between the three standards. GB/T 2423. 1 Test A test sample relating to non- thermal and thermal contrast test sample test application guidance applicable to this section. Note: The definition of non- heat test sample according to GB/T 2421 -related provisions, should not be measured under low pressure hottest temperature. GB/T 2423. 1 Test A test sample should be given priority in the heat without forced air circulation in a chamber test.

GB/T 2423.25-2008: Environmental testing - Part 2: Test methods - Test Z/AM: Combined cold / low air pressure tests


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Environmental testing Part 2. Tests methods Test Z/AM. Combined cold/low air pressure tests ICS 19.040 K04 National Standards of People's Republic of China GB/T 2423.25-2008/IEC 60068-2-40. 1976 Replacing GB/T 2423.25-1992 Environmental testing for electric and electronic products Part 2. Test methods Test Z/AM. Combined cold/low air pressure tests (IEC 60068-2-40. 1976, Basicenvironmentaltestingprocedures- Part 2. TestsTestZ/AM. Combinedcold/lowairpressuretests, IDT) Posted 2008-12-30 2009-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Introduction 1 1.1 Overview 1 1.2 Low pressure 1 1.3 Temperature 1 1.4 Normative references 1 2 Objective 2 General Description 2 3 Test equipment 2 4 4.1 Test Chamber 2 Installation 2 4.2 5 severity levels 2 5.1 General Requirements 2 5.2 Temperature, pressure, and preferably a combination of duration 2 Pretreatment 2 6 7 initial detection 3 8 3 test conditions 8.1 General provisions 3 8.2 Test procedure cooling test samples without artificial cooling and non-cooling test samples 3 Note 8.3 with artificial cooling test samples were tested at 3 9 3 intermediate detection Recovery 10 4 11 final inspection 4 Information given in the relevant specifications 12 4 Appendix NA (Informative Appendix) GB/T 2423 standard part 7 GB/T 2423.25-2008/IEC 60068-2-40. 1976

Foreword

GB/T 2423.25 is Part 25 GB/T 2423 standard. Part of the GB/T 2423 standard, see informative Annex NA. This section is equivalent to using the International Electrotechnical Commission IEC 60068-2-40. 1976 (first edition) "Basic environmental testing procedures - Part 2. Test Test Z/AM. Combined cold/low air pressure tests "(in English) and its amendments 1. 1983. For ease of use, this section do the following Editorial changes. --- To be consistent with the new IEC 60068 title name, the title of this section by the name of "Basic environmental testing procedures" to "electrical and electronic Environmental testing "; --- "IEC 60068-2-40. 1976 this part" was changed to "GB/T 2423.25-2008 this section"; --- Remove the IEC 60068-2-40. 1976 Foreword and Preface; --- Increase the national standard foreword; --- Increased the list of normative references the introductory phrase of the document; there is a reference to the correspondence between the national standards with international standards, and changes Order; --- Increase the informative appendix "GB/T 2423 standard part" (see appendix NA). This Part replaces GB/T 2423.25-1992 "electric and electronic products environmental testing procedures Test Z/AM. Combined cold/low air pressure Comprehensive test. " This section compared with the GB/T 2423.25-1992 main changes are as follows. --- GB/T 2423.25-1992 reference to the International Electrotechnical Commission IEC 60068-2-40. 1976 (first edition) "Basic Environment Test procedures - Part 2. Tests - Test Z/AM. Combined cold/low air pressure tests "(in English) and its amendments 1. 1983, This section is tantamount to the adoption; --- Consistent with IEC original, this section in Figures 1 and 2 to Fig. 1a) and 1b), and placed in the body of the last; --- Consistent with IEC original format is prepared, this section 4.1.1 and 4.1.2 combined; and 5.1.3 combined 5.1.1,5.1.2 And together; 8.1.1 and 8.1.2 combined; --- This part is not listed in Table 1 and the temperature, pressure corresponding to the height values, see the relationship between the three specific standards; and increases in mbar The pressure value of the unit; It does not require temperature control during this part --- 8.2.8 pressure. Appendix NA This section is informative appendix. This part of the National Electrical and Electronic Products Environmental conditions and environmental tests for Standardization Technical Committee (SAC/TC8) and focal points. This section was drafted by Guangzhou Electric Apparatus Research Institute. The main drafters of this section. Huli Fen. This part replaces part of the previous editions are. --- GB 2423.25-1981, GB/T 2423.25-1992. GB/T 2423.25-2008/IEC 60068-2-40. 1976 Environmental testing for electric and electronic products Part 2. Test methods Test Z/AM. Combined cold/low air pressure tests

1 Introduction

1.1 Overview GB/T 2423 This section is about the thermal and non-thermal test sample at low temperature (temperature gradient or mutations) and low air pressure tests, see 8.2.2 and 8.2.8. Purpose of this test is to determine the low-temperature components, equipment and other products encountered in their storage and use - low air pressure environments suitable Atopic. The comprehensive test is usually only a single test sample used for environmental testing can not reveal the integrated environmental impact. Provisions of this Part Test procedure applies only during the test to achieve a stable temperature of the test sample. Test methods specified in this standard can only test a heat test sample. 1.2 Low pressure This test procedure is applicable to pressures greater than 1kPa the pressure test. When the pressure is less than or equal to 1kPa, you may not have to consider the test drive Content sequence. This section does not specify the relationship between height, pressure and temperature. See the special relationship between the three standards. 1.3 Temperature 1.3.1 GB/T 2423.1 guidance relating to non-heat test A test sample cooling test samples and test applications apply to this comparison section. Note. The definition of a non-heat test sample in accordance with the relevant provisions of GB/T 2421, should not measure the hottest temperature at low pressure. 1.3.2 GB/T 2423.1 Test A test sample cooling priority should be tested in the absence of forced air circulation in the chamber. 1.4 Normative References The following documents contain provisions which, through reference to GB/T 2423 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2421.1 Environmental testing for electric and electronic products - Part 1. General (GB/T 2421.1-2008, IEC 60068-1. 1988, IDT) GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (GB/T 2423.1-2001, IEC 60068-2-1.2007, IDT) GB/T 2423.21 Environmental testing for electric and electronic products Part 2. Test methods - Test M. Low air pressure (GB/T 2423.21- 2008, IEC 60068-2-13.2005, IDT) GB/T 2423.22 Environmental testing for electric and electronic products Part 2. Test methods - Test N. temperature changes (GB/T 2423.22- 2002, IEC 60068-2-14. 1984, IDT) 1) GB/T 2424.1 electric and electronic products environmental testing high temperature and low temperature tests (GB/T 2424.1-2005, IEC 60068-3-1. 1974, IDT) GB/T 2424.15 electric and electronic products environmental testing procedures for temperature/low air pressure tests Guide (GB/T 2424.15-2008, IEC 60068-3-2. 1976, IDT) 1) IEC 60068-2-40 referenced file is not listed in the standard, but the text references, see Note 8.2.2. GB/T 2423.25-2008/IEC 60068-2-40. 1976

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 2423.25-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 2423.25-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 2423.25-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2423.25-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 2423.25-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2423.25-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.