US$319.00 ยท In stock Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24149.3-2017: Plastics -- Polypropylene (PP) compound for automobile -- Part 3: Door panel Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 24149.3-2017 | English | 319 |
Add to Cart
|
4 days [Need to translate]
|
Plastics -- Polypropylene (PP) compound for automobile -- Part 3: Door panel
| Valid |
GB/T 24149.3-2017
|
PDF similar to GB/T 24149.3-2017
Basic data Standard ID | GB/T 24149.3-2017 (GB/T24149.3-2017) | Description (Translated English) | Plastics -- Polypropylene (PP) compound for automobile -- Part 3: Door panel | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | G32 | Classification of International Standard | 83.080.20 | Word Count Estimation | 16,142 | Date of Issue | 2017-11-01 | Date of Implementation | 2018-05-01 | Regulation (derived from) | National Standard Announcement 2017 No. 29 | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China |
GB/T 24149.3-2017: Plastics -- Polypropylene (PP) compound for automobile -- Part 3: Door panel---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics-Polypropylene (PP) compound for automobile-Part 3. Door panel
ICS 83.080.20
G32
National Standards of People's Republic of China
Plastic automotive polypropylene (PP) special materials
Part 3. Door inner panel
Plastics-Polypropylene (PP) compoundforautomobile-
Part 3.Doorpanel
Posted.2017-11-01
2018-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
GB/T 24149 "plastic automotive polypropylene (PP) special material" is divided into four parts.
--- Part 1. Bumper;
--- Part 2. Dashboard;
--- Part 3. Door inner panel;
--- Part 4. Others.
This section GB/T 24149 Part 3.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part is proposed by China Petrochemical Corporation.
This part of the National Plastics Standardization Technical Committee petrochemical plastic resin products Branch (SAC/TC15/SC1) centralized.
This section is responsible for the drafting unit. Shanghai Plitcom Composite Materials Co., Ltd.
Participated in the drafting of this section. Blonde Technology Co., Ltd., Beijing Poly Ryan Plastic Co., Ltd., China Petroleum and Chemical Corporation
Company Beijing Yanshan Branch Institute of Applied Resin, Zhejiang Pletter New Materials Co., Ltd., Chery Automobile Co., Ltd., Zhejiang Geely
Automobile Research Institute Co., Ltd., Great Wall Motor Co., Ltd., Beijing Foton Motor Co., Ltd.
The main drafters of this section. Zhang Ying, Zhang Xiangfu, Luo Zhongfu, Ding Chao, Yang Bo, Zhang Xin, Cheng Wei, Sun Yanwen, Shi Rongbo, He Lili, Yang Hao,
Cui Wenbing, Shang Hongbo.
Plastic automotive polypropylene (PP) special materials
Part 3. Door inner panel
1 Scope
GB/T 24149 provisions of this part of the door panels with polypropylene (PP) nomenclature, terms and definitions, requirements, test side
Law, inspection rules, marking, packaging, transportation and storage.
This section applies to thermoplastic propylene copolymer impact-based, and elastomers, mineral fillers and other additives by a certain percentage of
Blending made of polypropylene for the manufacture of automotive interior door panels.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Textiles Tests for color fastness GB/T 250-2008 Textiles - Gray sample cards for color assessment
GB/T 1033.1-2008 Plastics - Determination of density of non-foamed plastics - Part 1. Immersion method, liquid pyknometer method and titration method
GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2. Test conditions for molding and extrusion of plastics
GB/T 1043.1-2008 Plastics - Determination of Charpy impact properties - Part 1. Non-instrumented impact test
GB/T 1634.2-2004 Determination of plastic deformation temperature of the load - Part 2. Plastic, hard rubber and long fiber reinforced composite
material
GB/T 2546.1-2006 Plastics - Polypropylene (PP) molding and extrusion materials - Part 1. Nomenclature system and classification basis
Plastics - Polypropylene (PP) molding and extrusion materials - Part 2. Preparation of test specimens and determination of properties
Plastics sampling methods
GB/T 2918-1998 plastic sample conditioning and testing of the standard environment
GB/T 3682-2000 Thermoplast melt mass flow rate and melt volume flow rate determination
Plastics - Thermal aging test methods
Representation and determination of rules for repair of numerical values and limit values GB/T 8170-2008
GB 8410-2006 combustion characteristics of automotive interior materials
Plastics - Determination of bending properties GB/T 9341-2008
Plastics - Determination of ash - Part 1. General methods
Preparation of injection molded test specimens of thermoplastic materials - Part 1. General principles and multipurpose test specimens and lengths
Preparation of strip samples
GB/T 17037.3-2003 Plastics - Thermoplastics materials - Injection molded test specimens - Part 3. Small square test specimens
Plastics - Preparation of injection molded thermoplastic thermoplastic materials - Part 4. Determination of mold shrinkage
Test methods for accelerated aging of xenon lamps for non - metallic automotive parts and materials GB/T 32088-2015
Thermoplastics particles - Appearance test method
ISO 6452.2007 Rubber, plastic coated fabrics Automotive interior material haze test method (Rubber-orplastics-coated
fabrics-Determinationoffoggingcharacteristicsoftrimmaterialsintheinteriorofautomobiles)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24149.3-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 24149.3-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24149.3-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24149.3-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|