US$799.00 · In stock Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24109-2009: CNC engraving and milling machine Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 24109-2009 | English | 799 |
Add to Cart
|
6 days [Need to translate]
|
CNC engraving and milling machine
| Valid |
GB/T 24109-2009
|
PDF similar to GB/T 24109-2009
Basic data Standard ID | GB/T 24109-2009 (GB/T24109-2009) | Description (Translated English) | CNC engraving and milling machine | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J54 | Classification of International Standard | 25.040.20 | Word Count Estimation | 36,352 | Date of Issue | 2009-06-12 | Date of Implementation | 2009-12-01 | Quoted Standard | GB 5226.1; GB/T 6576; GB/T 7932; GB/T 9061-2006; GB 15760; GB/T 16769-1997; GB/T 17421.1-1998; GB/T 17421.2-2000; GB/T 19449.1-2004; GB/T 19449.2-2004; JB/T 8832 | Regulation (derived from) | National Standard Approval Announcement 2009 No.8 (Total No.148) | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | Summary | This standard specifies the technical requirements for CNC engraving and milling machine, test methods and inspection rules. This standard applies to tune gantry CNC milling machines, other forms of CNC milling machine, CNC engraving machine can reference to use. |
GB/T 24109-2009: CNC engraving and milling machine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
CNC engraving and milling machine
ICS 25.040.20
J54
National Standards of People's Republic of China
CNC milling machine
Posted 2009-06-12
2009-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 2 Technical Requirements
5 Test Method 3
26 6 Inspection Rules
Appendix A (informative) machine tool main drive of the maximum torque and approximate calculation tests 28
Annex B (informative) Maximum cutting resistance testing machine and approximate calculation method 29
Foreword
Appendix A of this standard and Appendix B is an informative annex.
The standard proposed by China National Light Industry Council.
This standard by the National Light Industry Machinery Standardization Technical Committee.
This standard was drafted. Ningbo Kaibo NC Machinery Co., Ltd., Ningbo Chenguang NC Machinery Co., Ltd.
The main drafters of this standard. Yu Yongda, HE Feng.
CNC milling machine
1 Scope
This standard specifies the technical requirements, test methods and inspection rules CNC milling machine.
This standard is applicable to gantry CNC milling machine (hereinafter referred to as the product), other forms of CNC engraving and milling machine, CNC engraving machine can also refer
use.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 5226.1 Safety of machinery electrical equipment Part 1. General requirements
GB/T 6576 machine lubrication system
GB/T 7932 General technical conditions of pneumatic systems
GB/T 9061-2006 General technical conditions for metal cutting machine tools
GB 15760 metal cutting machine tool safety general technology condition
GB/T 16769-1997 Metal-cutting machine noise level measurements
GB/T 17421.1-1998 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines
GB/T 17421.2-2000 Test code for machine tools - Part 2. CNC axis positioning accuracy and repeatability of determination
GB/T 19449.1-2004 interfaces - Part 1 hollow cone with a flange contact surface. shank - Size
GB/T 19449.2-2004 Part 2 with flange contact surface of a hollow cone interfaces. mounting holes - Size
JB/T 8832 CNC system General technical conditions
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Both engraving and milling capacity of CNC machine tools.
3.2
Capable of high-intensity cutting CNC milling machine.
3.3
The maximum feed rate of not less than NC 15m/min for engraving and milling machine.
3.4
CNC with automatic tool changer (ATC) of the engraving and milling machine.
3.5
Equipped with automatic tool changer (ATC), and the maximum feed rate of not less than NC 15m/min for engraving and milling machine.
|