GB/T 23436: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 23436-2025 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Cleaning fluids for automotive windshield
| Valid |
GB/T 23436-2025
|
| GB/T 23436-2009 | English | 85 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Windshield cleaning fluid
| Valid |
GB/T 23436-2009
|
Basic data | Standard ID | GB/T 23436-2025 (GB/T23436-2025) | | Description (Translated English) | Cleaning fluids for automotive windshield | | Sector / Industry | National Standard (Recommended) | | Date of Implementation | 2026-03-01 | | Older Standard (superseded by this standard) | GB/T 23436-2009 | GB/T 23436-2009: Windshield cleaning fluid---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Windshield cleaning fluid
ICS 03.220.20
R16
National Standards of People's Republic of China
Automobile windshield cleaning fluid
Posted 2009-03-31
2009-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 technical requirements and test methods 2
5 Inspection Rules 3
6 signs, packaging, transportation and storage 4
Appendix A (normative) cleaning liquid Appearance Quality Inspection Act 5
Appendix B (normative) Method for determination of the cleaning solution was washed 6
Annex C (normative) cleaning liquid capacitive Inspection Act 9
Annex D (normative) washing liquid metal corrosion test method 10
Appendix E (normative) cleaning liquid rubber impact-test 12
Annex F (normative) plastic cleaning fluid impact test method 14
Annex G (normative) car washing liquid organic coating on Inspection Act 15
Annex H (normative) cleaning solution stability test method 16
Annex I (normative) hydrophobic car windshield washing liquid water resistance test method 17
Foreword
This standard corresponds to JISK2398.2001 "car with windscreen washer fluid," and JISK2398.2001 non-equivalent degree of consistency.
This standard is a technical difference JISK2398.
--- Increasing the appearance of test items;
--- In order to meet China's vast territory, climate complex characteristics of the water-based products in JISK2398 by freezing divided into common type
And low temperature;
--- In Appendix A with diatomaceous earth instead of the Japanese Kanto proprietary powder.
The Standard Appendix A, Appendix B, Appendix C, Appendix D, Appendix E, Appendix F, Appendix G, Appendix H and Appendix I are normative
appendix.
This standard by the National Automotive Standardization Technical Committee maintenance (SAC/TC247) and focal points.
This standard was drafted. Ministry of Communications Highway Research Institute, Zhangjiagang Dick car Chemicals Co., Ltd., Beijing Fu Runda Chemical Co.
Liability company.
The main drafters of this standard. Liu Li, Jiao Jian Highly Competent Zhang , Cao Yunlong, Wang Jing, Tao Dian Bin.
Automobile windshield cleaning fluid
1 Scope
This standard specifies the hydrophobic and water-based automotive windshield washing liquid technical requirements, inspection rules and signs, packaging, transportation and storage
Deposit and other requirements.
This standard applies to automobile windshield cleaning fluid production and testing.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 699 high-quality carbon structural steel
GB/T 2520 tin plated cold-rolled steel sheet (GB/T 2520-2000, eqvISO 11949.1995)
GB/T 3190 Wrought aluminum and aluminum alloy chemical composition (GB/T 3190-1996, neqISO 209.1991)
GB/T 4756 petroleum liquids hand sampling method (GB/T 4756-1998, eqvISO 3170. 1988)
GB/T 5231 Wrought copper and copper alloy chemical composition and shape of the product
GB/T 6739 Determination of film hardness by pencil paints and varnishes (GB/T 6739-2006, ISO 15184.1998, IDT)
GB 9656 automotive safety glass (GB 9656-2003, ECER43.2000, NEQ)
JB/T 8230.3 microscope slides
QC/T 44 electric automobile windshield wiper technical requirements
QC/T 246 electric car windshield washer technical conditions
SH/T 0069 engine antifreeze, rust inhibitors and coolant pH value measurement method
SH/T 0084 Test Methods for Cooling System Chemical Solutions on Organic Coatings on the car
SH/T 0090 engine coolant freezing point assay
SH/T 0164 Petroleum products packaging, storage and cargo inspection rules
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Automobile wiper commonly used to remove surface dirt car windshield fluid.
3.2
Taken directly from the product packaging container car windshield cleaning fluid.
3.3
Label allowed on the packaging container when the maximum amount of water concentration (by volume).
3.4
With alcohols, water, and a surfactant as a main component of the cleaning solution.
|