HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 23237-2009 English PDF

US$669.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23237-2009: Methods of anthropometry for locating acupuncture points
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 23237-2009English669 Add to Cart 5 days [Need to translate] Methods of anthropometry for locating acupuncture points Valid GB/T 23237-2009

Standard similar to GB/T 23237-2009

GB/T 16751.3   GB/T 42467.1   GB/T 16751.1   

Basic data

Standard ID GB/T 23237-2009 (GB/T23237-2009)
Description (Translated English) Methods of anthropometry for locating acupuncture points
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard C10
Classification of International Standard 11.020
Word Count Estimation 29,286
Date of Issue 2009-02-06
Date of Implementation 2009-08-01
Regulation (derived from) National Standard Approval Announcement 2009 No.2 (Total No.142)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the measurement of body surface positioning acupuncture acupoints used. This standard applies to acupuncture teaching, research, acupoints surface measurements involved in health care.

GB/T 23237-2009: Methods of anthropometry for locating acupuncture points

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods of anthropometry for locating acupuncture points ICS 11.020 C10 National Standards of People's Republic of China Acupoints positioning measurement of body Posted 2009-02-06 2009-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Terms and definitions 1 2.1 Basic terms 1 2.2 3-point landmarks 2.3 Reference point hole 8 3 measurement conditions and determine the measurement principles of the project 12 3.1 Measurement conditions 12 3.2 determine the measurement principles of the project 13 4 items and methods of measurement 13 4.1 finger with body measurements and 13 4.2 systemic bone measurement items and methods 13 4.3 Location disagreement acupoints measurement items and methods 15 Appendix A (informative) of bone off the amount of 17-inch Appendix B (normative) to determine the measurement point, the measurement principle of the project 18 Annex C (normative) acupoints positioning anthropometric project schematic 19 References 24

Foreword

The Standard Appendix B, Appendix C are normative appendices, Appendix A is an information appendix. This standard was proposed by the State Administration of TCM. This standard by the Chinese Acupuncture Society. This standard was drafted. Acupuncture and Chinese Medicine Research Institute of Chinese Academy of Sciences. The main drafters of this standard. Wu Xiaodong, Wang Xue moss, Kong Wei Juan, Wang Yong, Yin Yuanping, Wu Fudong, Hu Ling, Gong Lue room, Huanglong Xiang.

Introduction

Acupuncture acupoints in three targeting methods. ① surface anatomical landmark positioning method; ② "bone of" off the amount of location method; ③ "refers inch" positioning method. With this Closely related to the ratio between the three methods of traditional landmarks between the degree of bone off the amount of value, as well as some acupoints positioning differences are to be through Actual measurements obtained through human testing, additions and amendments. Acupoints positioning anthropometric can acupoints positioning based on Fuller, sciences, That acupoints illustrations, models and wall charts produced to provide data support. The benchmarking knowledge and methods of modern anatomy and anthropometry, and Provisions for the measurement of body acupoints positioning. Given the amount of bone off acupuncture acupoints positioning method used in the "inch" finger of the same body, "inch" and the International System of Units unit of length measurement is different, 1987 World Health Organization international conference in Seoul, South Korea OK "inch" (cun) for the meridians and acupoints positioning of the standard unit of measurement. This standard acupoints positioning that is using this unit of measurement. Acupoints positioning measurement of body

1 Scope

This standard provides a measurement of body acupuncture acupoints positioning surface use. This standard applies to acupuncture teaching, scientific research, medical treatment involved acupoints surface measurements.

2 Terms and definitions

The following terms and definitions apply to this standard. 2.1 Basic terms 2.1.1 Beck as the main indicator to the surface off the amount of the whole body length and width, for acupoints positioning. Common systemic bone Duzheliangcun see Appendix A. 2.1.2 In particular distances are measured by the finger surface as the unit of measurement used acupoints positioning. 2.1.3 Median plane (sagittal plane) the longitudinal direction of the body or that it is parallel to the plane (lateral sagittal plane). [GB/T 5703-1999, the definition 2.2.25] 2.1.4 Frankfurt plane Screen dot ears and right inferior orbital point posed standard level. [GB/T 5703-1999, the definition 2.2.8] 2.1.5 Close to the median sagittal plane were within, much to the sagittal plane as those outside. Palm side of the upper side of the bend that is called "inside", ie, the back side The extension side is called "outer"; the lower limbs to the side of the midline is called the "inside", leg side away from the midline is called "the outside." 2.1.6 Refer respectively to close upper and lower ends of the body. [GB/T 12346-2006, the definition 2.2.2] 2.1.7 From the ventral body recently, for the former, recently, from the back of the body after. [GB/T 12346-2006, the definition 2.2.3] 2.1.8 Nearly four limbs to the trunk by proximal [end], by far the trunk of the distal [terminal].

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23237-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23237-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23237-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23237-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.