|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2295-2008: Determination of the ash content of coking solid products
Status: Valid GB/T 2295: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 2295-2008 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Determination of the ash content of coking solid products
| Valid |
GB/T 2295-2008
|
| GB/T 2295-1980 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Method for determination of coal tar pitch ash content
| Obsolete |
GB/T 2295-1980
|
PDF similar to GB/T 2295-2008
Basic data | Standard ID | GB/T 2295-2008 (GB/T2295-2008) | | Description (Translated English) | Determination of the ash content of coking solid products | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G18 | | Classification of International Standard | 71.080 | | Word Count Estimation | 5,521 | | Date of Issue | 2008-08-19 | | Date of Implementation | 2009-04-01 | | Older Standard (superseded by this standard) | GB/T 3069.1-1986; GB/T 2295-1980 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.14 (Total No.127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the principles of solid products ash coking determination, instrument, preparation of samples, test procedure, calculated results. This standard applies to the resulting high temperature coal tar, coke solids processed products-Determination of ash on. Note: Solid products including coking coal tar pitch, modified bitumen, refined naphthalene, industrial naphthalene, press naphthalene, solid Coumarone-indene resin. | GB/T 2295-2008: Determination of the ash content of coking solid products---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of the ash content of coking solid products
ICS 71.080
G18
National Standards of People's Republic of China
Replacing GB/T 2295-1980, GB/T 3069.1-1986
Solid products of coking method for determination of ash
Posted 2008-08-19
2009-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
The standard is "Determination of naphthalene party ash GB/T 2295-1980" Determination of ash bituminous coal "and GB/T 3069.1-1986
Integration on the basis of law "on.
This standard replaces GB/T 2295-1980 "bituminous coal ash Determination", GB/T 3069.1-1986 "Determination of naphthalene ash."
This standard and GB/T 2295-1980, the main changes compared to the GB/T 3069.1-1986 are as follows.
--- Ignition temperature increased from 815 ℃ ± 10 ℃ to 900 ℃ ± 10 ℃;
--- Bituminous coal instead of asphalt, solid coumarone - indene resin burning time was shortened to 1h;
--- Modify the standard name;
--- Instruments and equipment to increase gas lamp or heater.
The standard proposed by China Iron and Steel Association.
This standard is under the jurisdiction of the National Steel Standardization Technical Committee.
This standard was drafted. Thermal Energy Research Institute in Anshan Steel Group, Angang New Steel Co., Ltd., Metallurgical Industry Information Standards Institute.
The main drafters of this standard. in silver Ping, Sun Jin Duo, Wang Wei, Wang Xiong, Yang Jinxia, \u200b\u200bSun Wei.
This standard replaces the previous standard published case.
--- GB/T 2295-1980;
--- GB/T 3069.1-1986.
Solid products of coking method for determination of ash
1 Scope
This standard specifies the principles of coking products solid ash measurement, instruments, sample preparation, test procedures, the results of calculations.
This standard applies to high-temperature coal tar processed products resulting solid coke - Determination of ash in.
NOTE. Solid products including coking coal bitumen, modified bitumen, refined naphthalene, industrial naphthalene, press naphthalene, solid coumarone - indene resin.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2000 coking products solid sampling methods
GB/T 2291 Bituminous coal laboratory sample preparation methods
Principle 3
Weigh a certain amount of coke solid product samples, low heat heating after removal of most of the volatiles were placed in 900 ℃ ± 10 ℃ muffle furnace
The ash to constant weight accounts for its percentage of residual material sample quality as ash.
4 instruments and equipment
4.1 muffle furnace. with thermostat device, to keep the temperature 900 ℃ ± 10 ℃. With thermocouple and pyrometer, the rear wall having an insertion hot stove
Galvanic holes, holes should be positioned so that the thermal contact point thermocouple in the furnace can be maintained from the bottom 20mm ~ 30mm position. There are door
A vent.
Muffle furnace should have a proper temperature zone, the temperature fluctuations of no more than 900 ℃ ± 10 ℃. Thermostatic temperature zone is close to the furnace
Thermocouple measurements. Thermocouple protection tube with calibration once a year.
4.2 gas lamp or heater. gas lamp or adjustable electric furnace.
4.3 porcelain evaporating dish. volume 50mL.
4.4 dryer. built-in desiccant.
4.5 Analytical balance. dividing the value of 0.0001g.
5 samples and preparation
5.1 Solid samples were taken according to GB/T 2000 regulations.
5.2 Preparation of bituminous coal sample according to GB/T 2991 regulations.
6 Test procedure
6.1 Table 1 must be weighed sample mass (weighing accuracy of 0.0002g) on \u200b\u200bthe pre-ignition to 900 ℃ ± 10 ℃ and constant weight over porcelain evaporating dish
in. Quality and burning at different times of the sample are shown in Table 1.
6.2 Sheng kind evaporating dish in the Gas lamp (adjustable or electric) low heat (do not smoke to date) was slowly heated to volatilize most of the volatiles
Later, on heating to 900 ℃ ± 10 ℃ muffle furnace door open, until complete evaporation of volatile compounds and then slowly advance furnace (or measurement
Non-volatile residue after slowly advancing 900 ℃ ± 10 ℃ muffle furnace), according to a predetermined time (see Table 1) burning, remove the check should be no black
Particles, after cooling in air 5min, placed in a desiccator, cooled to room temperature, and weighed. Then a constant weight check every 15min, until
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2295-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 2295-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 2295-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2295-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 2295-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2295-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|