HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 2281-2008 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2281-2008: Determination of density of coking oil products
Status: Valid

GB/T 2281: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 2281-2008English169 Add to Cart 3 days [Need to translate] Determination of density of coking oil products Valid GB/T 2281-2008
GB/T 2281-1996English319 Add to Cart 3 days [Need to translate] Light oil products of coal carbonization--Test method of density Obsolete GB/T 2281-1996

PDF similar to GB/T 2281-2008


Standard similar to GB/T 2281-2008

GB/T 18255   GB/T 1816   GB/T 2293   GB/T 2282   GB/T 2283   GB/T 2285   

Basic data

Standard ID GB/T 2281-2008 (GB/T2281-2008)
Description (Translated English) Determination of density of coking oil products
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G18
Classification of International Standard 71.080
Word Count Estimation 7,767
Date of Issue 2008-05-13
Date of Implementation 2008-11-01
Older Standard (superseded by this standard) GB/T 2281-1996; GB/T 15243-1994
Quoted Standard GB/T 8170; YB/T 2305; SH/T 0316
Regulation (derived from) National Standard Approval Announcement 2008 No.8 (Total No.121)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the principles of coking oil products density test, test equipment, test procedure, calculated results, repeatability. This standard applies to the density determination coking oil products.

GB/T 2281-2008: Determination of density of coking oil products

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of density of coking oil products ICS 71.080 G18 National Standards of People's Republic of China Replacing GB/T 2281-1996, GB/T 15243-1994 Coking oil products density test method Posted 2008-05-13 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The integration of standard GB/T 2281-1996 "coker gas oil products density test method" and GB/T 15243-1994 "Coking viscous oil Products Density Test Method "in the revision process, the method of determination of two light oil products and oil products sticky density into one. This standard replaces GB/T 2281-1996 and GB/T 15243-1994. This standard and GB/T 2281-1996, GB/T 15243-1994, compared mainly to do with the following modifications. After --- integrate standard entitled "Standard Test Method for Density of coking oil products." --- Added "Warning", "normative references." --- "Range" to apply densitometry coking oil products. --- "Test principle" than previously described in more explicit. --- "Test equipment" in the cylinder is given a minimum density meter specified in Appendix B of coking products or in compliance with specific density meter SH/T 0316 in the SY-05 oil standard density meter. --- "Test step" method for determining the density of light oil and combined oil viscosity, density determination and sticky oil products added at the front Processing steps. Increasing the sample processing steps. --- Appendix B to cancel the original density coefficient table. --- Abolition of the "8 arbitration." This standard Annex A, Annex B normative appendix. The standard proposed by China Iron and Steel Association. This standard is under the jurisdiction of Metallurgical Industry Information Standards Institute. This standard was drafted. Inner Mongolia Baotou Steel Gangliangufen Co., Metallurgical Industry Information Standards Institute. The main drafters of this standard. segment Sulan, ZHAO Yong, Zhang Tong mountain, Pangwen Juan, Xie Xiaoxia, Ning Yuping, Sun Wei. This standard replaces the previous standard published case. --- GB 2281-1980, GB 8032-1987, GB/T 2281-1996; --- GB 3065.1-1982, GB 8352.1-1987, GB/T 15243-1994. Coking oil products density test method Warning. flammable hazardous coking oil products for skin and eye irritation, there is risk of inhalation of toxic gases or invade the skin, to wear protective Masks, protective glasses and protective gloves, test operations to be carried out in a forced air hood, keep a distance from the source of fire.

1 Scope

This standard specifies the coking oil products density test principle, test equipment, test procedure, the results of calculation of repeatability. This standard applies to the density determination coking oil products.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 8170 numerical rounding rules YB/T 2305 coking products Glass thermometers SH/T 0316 Petroleum hydrometer Principle 3 The sample under test temperature, density with a predetermined density of the sample was measured by. The sample to be stationary, the temperature reached equilibrium, record Thermometer and hydrometer readings, converted to density at 20 ℃, the symbol ρ20 expressed in units of g/cm 3.

4 Instrument

4.1 Density measurement tube. made of transparent glass with an inner diameter of at least than the density meter (4.2) outer diameter of 25mm, the height should make density meter test Like when floating, density meter at the bottom of the bottom of the cylinder spacing of at least 25mm. 4.2 density meter. density meter used should be consistent with the provisions of Appendix B of coking products or in compliance with specific density meter SH/T 0316 in the SY-05 Oil standard density meter. 4.2.1 three kinds of benzene density meter range. 0.8500 ~ 0.9000, g/cm3, the ruled is 0.0005g/cm3. 4.2.2 Other products by density meter range. 0.830 ~ 0.890,0.890 ~ \u200b\u200b0.950,0.950 1.010,1.010 ~ ~ ~ 1.070,1.070 1.130,1.010 ~ 1.070,1.070 ~ 1.130,1.130 ~ 1.190,1.190 ~ 1.250, g/cm3, sub-grid value 0.001g/cm3. 4.3 Thermometer. 0 ℃ ~ 50 ℃, in line with the provisions of YB/T 2305 in COK9C thermometer. 4.4 water bath. water bath.

5 test procedure

5.1 The mixed sample. Sticky oil products was slowly heated in a water bath of less than 60 ℃, while heating with stirring to dissolve all, except To the upper portion of the visible water. 5.2 according to the requirements of Table 1, the mixed sample, carefully poured into clean, dry density measurement tube, avoiding splashing the sample and generate air Bubble, samples taken below the liquid level in the density of the cylinder placed along the 35mm ~ 40mm, sticky oil products will be pre-heated to a density metering cylinder 40 ℃ ~ 50 ℃ (wash oil 15 ℃ ~ 35 ℃ without preheated) water bath, gently insert the thermometer in the sample, when the sample temperature reaches a predetermined Temperature range, the hydrometer gently inserted until the hydrometer and temperature are stable, the reading remember sample temperature, and simultaneously press the densitometer provisions Reading Notes apparent density, ρa to represent. When reading the value of the sample does not allow air bubbles, density meter is not in contact with the cylinder wall, the shape of the meniscus Should remain unchanged.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 2281-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 2281-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 2281-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2281-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 2281-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2281-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.