|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21964-2025: Repair of agricultural machines - Safety specification
Status: Valid GB/T 21964: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21964-2025 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Repair of agricultural machines - Safety specification
| Valid |
GB/T 21964-2025
|
| GB/T 21964-2008 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Repair of agricultural machines -- Safety regulations
| Valid |
GB/T 21964-2008
|
PDF similar to GB/T 21964-2025
Basic data | Standard ID | GB/T 21964-2025 (GB/T21964-2025) | | Description (Translated English) | Repair of agricultural machines - Safety specification | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B90 | | Classification of International Standard | 65.060.01 | | Word Count Estimation | 6,687 | | Date of Issue | 2025-05-30 | | Date of Implementation | 2025-12-01 | | Older Standard (superseded by this standard) | GB/T 21964-2008 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 21964-2025: Repair of agricultural machines - Safety specification---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 65.060.01
CCSB90
National Standard of the People's Republic of China
Replace GB/T 21964-2008
Safety regulations for repair of agricultural machinery
Released on 2025-05-30
2025-12-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document replaces GB/T 21964-2008 "Safety Specification for Repair of Agricultural Machinery". Compared with GB/T 21964-2008, except for the structure
In addition to adjustments and editorial changes, the main technical changes are as follows.
a) Changes have been made to the safety production management system, hazardous substance handling, workplace fire protection, and used oily gloves and waste in the “Working Environment” section.
Requirements for handling cotton yarn, dirty rags, etc. (see 4.1, 4.2, 4.4, 4.7, 3.1, 3.7, 3.12, 3.6 of the.2008 edition);
b) Added requirements for handling waste oil, waste liquid, etc. and workplace safety equipment in the "working environment" (see 4.3 and 4.5);
c) Changed the requirements for the storage of dangerous goods in the "working environment" (see 4.6, 3.3 and 3.5 of the.2008 edition);
d) Added requirements for the floor of the workplace in the “Working environment” (see 4.11);
e) Added the following items to “Operators and Protection”. personnel safety education and training, compliance with safety production rules and regulations, and
Requirements for on-the-job operation and test drivers (see 5.1, 5.2, 5.4, 5.5);
f) Changed the requirement of wearing labor protection articles in accordance with relevant requirements in "Operators and Protection" (see 5.6, 6.1,.2008 edition)
6.9);
g) Changed the requirements for operating rotating equipment and working in toxic material areas in "Operators and Protection" (see 5.7, 5.10,.2008
6.8 and 6.5 of the.2011 edition);
h) The requirements for the use, management and maintenance of metal cutting machine tools in “Equipment Safety” have been deleted (see 5.5 of the.2008 edition);
i) Changed the requirements for the use, management and maintenance of repair, commissioning and inspection equipment in "Equipment Operation and Management" (see 6.5,.2008
Version 5.6);
j) The requirement for each type of work to hold a certificate before taking up the post in the “operation process” has been deleted (see 4.1 and 4.9 of the.2008 edition);
k) Added safety requirements for the use of power tools during “operation” (see 7.2);
l) Changed the requirements for using jacks for repair work, carrying and lifting heavy objects, and draining the repair tank in the "operation process" (see 7.9,
7.12, 7.17, 4.3, 4.12, 4.18 of the.2008 edition);
m) Added environmental protection during on-site operations, safe working distance from moving parts, and high temperature and high pressure state of disassembly in the "operation process"
Requirements for parts under (see 7.14 to 7.16).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Machinery Industry Federation.
This document is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201).
This document was drafted by. Heilongjiang Agricultural Machinery Engineering Science Research Institute, Agricultural Mechanization Station of the Ministry of Agriculture and Rural Affairs, Shandong Junmadao Machinery
Machinery Co., Ltd., Shanghai Wenqing Agricultural Development Co., Ltd., and Suihua Branch of Heilongjiang Agricultural Machinery Engineering Science Research Institute.
The main drafters of this document are. Yu Zhigang, Wang Baochen, Zou Dechen, Song Nannan, Fu Dongxing, Zhang Jiwei, Zhao Yan, Li Xiangyu, Wang Qingfeng, Wang Yangguang,
Zhu Yuehe, Li Jianxin, You Liming, Zhao Zhenyun, Cai Qingsong, Gao Mingchuan, Wang Jun, Wang Jun, Yu Younian, Lv Taihong, Liu Jianfeng, Yang Junxi, Gao Yong,
Zhang Fuxue.
The previous versions of this document and the documents it replaces are as follows.
---First published in.2008 as GB/T 21964-2008;
---This is the first revision.
Safety regulations for repair of agricultural machinery
1 Scope
This document specifies the working environment, operating personnel and protection, equipment operation and management, and safety of the working process of agricultural machinery repair.
Require.
This document applies to agricultural machinery repair operations.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB 2894 Safety signs and their use guidelines
GB/T 3787 Safety technical regulations for the management, use, inspection and maintenance of hand-held power tools
GB 4674 Safety regulations for grinding machinery
GB/T 6067 (all parts) Safety regulations for lifting machinery
GB 9448 Welding and cutting safety
GB/T 13869 Electricity Safety Guidelines
GB 15760 General technical requirements for safety protection of metal cutting machine tools
GB/T 21963 Terminology for maintenance of agricultural machinery
3 Terms and definitions
The terms and definitions defined in GB/T 21963 apply to this document.
4 Working Environment
4.1 A safety production management system that is appropriate to the maintenance work content should be established and implemented, and corresponding safety protection measures should be in place.
4.2 A system for the disposal of waste oil, waste liquid, waste water, waste batteries, waste tires and waste containing asbestos that meets environmental protection requirements should be established and implemented.
Environmental management system for centralized collection, classified storage and effective treatment. Hazardous substance storage areas should be clearly defined, and isolation and control measures should comply with
Meet environmental protection requirements.
4.3 The working environment and the facilities for treating waste oil, waste liquid, waste water, lighting, ventilation, dust removal, purification and noise elimination configured according to the production process should be
Meet environmental protection requirements.
4.4 The workplace should be equipped with fire-fighting facilities and equipment, set up fire safety signs, and regularly organize inspections and maintenance to ensure that they are in good condition and effective.
Evacuation passages, emergency exits and fire truck passages are unobstructed.
4.5 The workplace should regularly maintain and service safety equipment such as acetylene meters, and conduct regular inspections to ensure normal use.
4.6 Storage of toxic, flammable, explosive items, dust, corrosive agents, pollutants and pressure vessels, etc., shall be equipped with appropriate safety protection measures and equipment.
The equipment should be stored in a designated safe place, away from fire and power sources, managed by a dedicated person, inspected regularly, and have complete entry and exit procedures.
4.7 Used oily gloves, waste cotton yarn and dirty rags should be stored in a safe place and disposed of regularly.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21964-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 21964-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 21964-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21964-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 21964-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 21964-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|