|
US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21782.12-2010: Coating powders -- Part 12: Determination of compatibility
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21782.12-2010 | English | 114 |
Add to Cart
|
3 days [Need to translate]
|
Coating powders -- Part 12: Determination of compatibility
| Valid |
GB/T 21782.12-2010
|
PDF similar to GB/T 21782.12-2010
Basic data | Standard ID | GB/T 21782.12-2010 (GB/T21782.12-2010) | | Description (Translated English) | Coating powders -- Part 12: Determination of compatibility | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G50 | | Classification of International Standard | 87.040 | | Word Count Estimation | 6,636 | | Date of Issue | 2010-09-26 | | Date of Implementation | 2011-08-01 | | Quoted Standard | GB/T 9754-2007; GB/T 21782.9-2010; ISO 1514-2004 | | Adopted Standard | ISO 8130-12-1998, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6 of 2010 (total 161) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies two different powder coatings stick together and cause deterioration of the surface properties of the final coating measurement method. The results of this method depends on the nature of the powder coating of the following: a. Chemical reactivity, b. Chemical composition, c fusion. Appearance of the start of degradation reaction, the nature and condition depends largely on the mixing ratio of the powder. Deterioration of the surface appearance of the substance may be manifested in different ways to change where the gloss, b, pinholes, including scattered small pinhole Heart " orange peel " appearance, d. " Shrinkage ", e: starting block, f | GB/T 21782.12-2010: Coating powders -- Part 12: Determination of compatibility---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coating powders Part 12. Determination of compatibility
ICS 87.040
G50
National Standards of People's Republic of China
Powder Coatings
Part 12. Determination of compatibility
Coatingpowders-
Part 12. Determinationofcompatibility
(ISO 8130-12.1998, IDT)
Issued on. 2010-09-26
2011-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 21782 "powder coating" is composed of 14 parts, the structure and corresponding international standards are as follows.
--- Part 1. Determination of particle size distribution by sieving (ISO 8130-1.1992, IDT);
--- Part 2. Comparison of the proportion of instrument gas density determination (ISO 8130-2.1992, IDT);
--- Part 3. Determination of liquid displacement pycnometer density (ISO 8130-3.1992, IDT);
--- Part 4. lower explosion limit calculations (ISO 8130-4.1992, IDT);
--- Part 5. Powder air mixture flow measurement (ISO 8130-5.1992, IDT);
Measured at a given temperature thermosetting powder coating of gel time (ISO 8130-6..1992, IDT) --- Part 6;
--- Part 7. Determination (ISO 8130-7.1992, IDT) mass loss during baking;
--- Part 8. Evaluation of the storage stability of thermosetting powders (ISO 8130-8.1994, IDT);
--- Part 9. Sampling (ISO 8130-9.1992, IDT);
--- Part 10. Determination of deposition efficiency (ISO 8130-10.1998, IDT);
--- Part 11. Determination of flow inclined plate (ISO 8130-11.1997, IDT);
--- Part 12. Determination of compatibility (ISO 8130-12.1998, IDT);
--- Part 13. Laser diffraction particle size analysis (ISO 8130-13.2001, IDT);
--- Part 14. Terminology (ISO 8130-14.2004, IDT).
This is Part 12 GB/T 21782 of.
This section uses the translation method identical with the international standard ISO 8130-12.1998 (E) "powder coating Part 12. Compatibility
Determination. "
For ease of use of ISO 8130-12.1992 in this section do major editorial changes as follows.
--- With "this Part" instead of "ISO 8130 part of this";
"." --- With a decimal point instead of a comma as the decimal point, "";
--- Delete international standards foreword.
This part is proposed by the China Petroleum and Chemical Industry Association (SAC/TC251).
This part of the National Standardization Technical Committee and the pigment coating (SAC/TC5) centralized.
This part mainly drafted by. Guangdong CIQ and CNOOC Changzhou coating Chemical Research Institute.
The main drafters of this section. ZHOU Ming-hui, Chen Qiang, Liu Yingfeng, Li Dan, Di Cuiping, Zhao Ling, Xiao Dahui, Zheng Jianguo, Homocysteine \u200b\u200bon.
Powder Coatings
Part 12. Determination of compatibility
1 Scope
This section GB/T 21782 is Paints, varnishes and related products and sampling series of standard test methods.
This section provides two different powder coatings mixing caused by measurement method the surface properties of the final coating degradation.
The results of this method depends on the powder coating of the following properties. a chemical reactivity; b chemical composition; c meltable... Appearance deterioration open
The reaction began, its essence and condition largely depends on the mixing ratio of the powder. Substance may worsen surface appearance in different ways
Manifested. a change in gloss; b pinhole, including small pinhole; c "orange peel" look; d "shrinkage"; e from the block; f color mixing...
The method is also applicable to the production and use of powder coating process, the mixing of different coating powder produced incompatible testing.
Note. the mechanical properties of the powder coating may decrease. But this section is only concerned about changes in appearance.
2 Normative references
The following standards contain provisions which through reference GB/T 21782 in this section constitute provisions of this section. When this part of the publication, the following
Editions indicated were valid version. All standards are subject to revision, to encourage the parties to agreements based on this study using the following criteria
The latest version. ISO and IEC members retain currently valid International Standard.
GB/T 9754-2007 Paints and varnishes contain metallic paint films of 20 °, 60 ° and 85 ° specular gloss measurement
(ISO 2813.1994, IDT)
GB/T 21782.9-2010 powder coatings Part 9 samples (ISO 8130-9.1992, IDT)
ISO 1514.2004 Paints and varnishes - Standard panels for
Principle 3
The powder coating according to a series of different proportions of each mixture was applied to a standard test plate, heating and check whether the surface that there is no
Compatible.
4 Instrument
Common laboratory equipment and the following instruments.
4.1 stainless steel plate or cold-rolled steel
In line with ISO 1514.2004 standard for clean, oil-free steel, one end of the drilled hole can be hung.
4.2 dusting system
Including corona charging or triboelectric charging guns and gun powder room with powder dust collecting appropriate means.
4.3 clean containers
You can test a suitable container containing the powder.
Note. The plastic bag is generally suitable non-metallic container of powder coatings.
4.4 Balances
Accurate to 10mg.
4.5 Oven
Ovenable after spraying test panels.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21782.12-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 21782.12-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 21782.12-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21782.12-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|