HOME   Cart(7)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 21412.10-2019 English PDF

US$1319.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21412.10-2019: Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 10: Specification for bonded flexible pipe
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 21412.10-2019English1319 Add to Cart 8 days [Need to translate] Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 10: Specification for bonded flexible pipe Valid GB/T 21412.10-2019

PDF similar to GB/T 21412.10-2019


Standard similar to GB/T 21412.10-2019

GB/T 21447   SY/T 5164   SY/T 5324   GB/T 21412.2   GB/T 21412.11   GB/T 21412.7   

Basic data

Standard ID GB/T 21412.10-2019 (GB/T21412.10-2019)
Description (Translated English) Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 10: Specification for bonded flexible pipe
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard E94
Classification of International Standard 75.180.10
Word Count Estimation 66,654
Date of Issue 2019-03-25
Date of Implementation 2019-10-01
Quoted Standard GB/T 228.1; GB/T 230.1; GB/T 231.1; GB/T 528; GB/T 532; GB/T 533; GB/T 1634.1; GB/T 1634.2; GB/T 1634.3; GB/T 1690; GB/T 2411; GB/T 2942; GB/T 7762; GB/T 9867; GB/T 12829; GB/T 15256; GB/T 18253; GB/T 20972.1; GB/T 20972.2; GB/T 20972.3; GB/T 21412.4
Adopted Standard ISO 13628-10-2005, MOD
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration
Summary This standard applies to the assembly of adhesive flexible pipe, including the assembly of flexible pipe body and end fittings at both ends. This standard applies to non-metallic reinforced flexible pipe, although its specific and unique technical problems have not been fully resolved. This standard applies to bonded flexible pipe containing materials and layered structures covered by ISO 13628-2. This standard applies to sweet and acidic media, including external infusion and injection applications. The transported medium includes oil, gas, water and chemical injection. This standard applies to static and dynamic flexible pipe used over flowlines, risers, jumpers and offshore handling hoses. This standard applies to flexible pipe with design pressures greater than or equal to 1.5 MPa (15 bar) and also for flexible pipe with lower design pressures, although no design requirements for these flexible pipes are specified.

GB/T 21412.10-2019: Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 10: Specification for bonded flexible pipe


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Oil and gas industry - Design and operation of underwater production systems - Part 10) ICS 75.180.10 E94 National Standards of People's Republic of China Oil and gas industry Design and operation of underwater production systems Part 10. Adhesive flexible pipe specifications Part 10. Specificationforbondedflexiblepipe (ISO 13628-10.2005, MOD) Published on.2019-03-25 2019-10-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III Introduction V 1 Scope 1 2 Normative references 2 3 Terms, definitions and abbreviations 4 3.1 Terms and Definitions 4 3.2 Abbreviations 9 4 functional requirements 10 4.1 Overview 10 4.2 General requirements 10 4.3 Overall design parameters 10 4.4 Internal fluid parameters 10 4.5 External Environment 12 4.6 System Requirements 12 5 Design Requirements 15 5.1 Load and load effects 15 5.2 Flexible pipe design method 17 5.3 Flexible pipe structure design 18 5.4 System Design Requirements 21 6 Material 24 6.1 Material Requirements 24 6.2 Assessment requirements 27 6.3 Quality Assurance Requirements 33 7 Manufacturing requirements 34 7.1 Warranty Requirements 34 7.2 skeleton layer 35 7.3 Composite preparation and calendering 36 7.4 Elastic material winding 37 7.5 Strengthening the armor layer 37 7.6 Insulation 37 7.7 End fittings 38 7.8 Curing Process 39 7.9 Special Process 39 7.10 Manufacturing tolerances 41 7.11 Repair 41 8 Document 41 8.1 Overview 41 8.2 Design basis 42 8.3 Design Load Report 42 8.4 Design Report 42 8.5 Manufacturing Quality Plan 43 8.6 Manufacturing Specification 43 8.7 Completion Document 43 8.8 Operation Manual 43 9 Factory accepted test 44 9.1 Overview 44 9.2 Path test 44 9.3 Hydraulic test 45 9.4 Electrical continuity and resistance test 45 9.5 Kerosene test 45 9.6 Vacuum test 46 10 signs and packaging 46 10.1 Sign 46 10.2 Packing 47 Appendix A (informative) Procurement Guide 48 Appendix B (informative) Bending stiffeners and bend limiters 54 Reference 58

Foreword

GB/T 21412 "Design and Operation of Underwater Production System for Oil and Gas Industry" is divided into 15 parts. --- Part 1. General requirements and recommended practices; --- Part 2. Flexible pipe systems for subsea and offshore; --- Part 3. Over-the-out pipe (TFL) system; --- Part 4. Underwater wellhead installations and tree equipment; --- Part 5. Underwater umbilical cable; ---Part 6. Underwater production control system; --- Part 7. Completion or workover riser system; --- Part 8. Underwater robot (ROV) interface for underwater production systems; ---Part 9. Remote operation tool (ROT) maintenance system; ---Part 10. Adhesive flexible pipe specifications; --- Part 11. Recommended practices for flexible pipe systems; --- Part 12. Dynamic production riser; --- Part 13. Remote operation tools and interfaces for underwater production systems; --- Part 14. Underwater high integrity pressure protection system; --- Part 15. Underwater structures and manifolds. This part is the 10th part of GB/T 21412. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the redrafting method to modify the design and operation of the ISO 13628-10.2005 "oil and gas industry underwater production system." Part 10. Adhesive flexible pipe specifications. The technical differences between this part and ISO 13628-10.2005 are as follows. --- Revised the "scope" representation, consistent with the requirements of GB/T 1.1. ---About the normative reference documents, this part has made technical adjustments to adapt to China's technical conditions, adjustments The situation is reflected in Chapter 2, “Regulatory Citations”, and the specific adjustments are as follows. ● Replace ISO 6892 with GB/T 228.1.1 modified to international standards. ● Replace ISO 6508-1 with GB/T 230.1 modified to international standards. ● Replace ISO 6506-1 with GB/T 231.1 modified to international standards. ● Replace ISO 37 with GB/T 528 equivalent to the international standard. ● Replace ISO 36 with GB/T 532 equivalent to international standards. ● Replaced ISO 2781 with GB/T 533, which is equivalent to the international standard. ● Replace ISO 75 (all parts) with GB/T 1634 (all parts) equivalent to international standards, two standard departments The degree of consistency between the points is as follows. GB/T 1634.1-2004 Determination of deformation temperature of plastics - Part 1. General test methods (ISO 75-1.2003, IDT); GB/T 1634.2-2004 Determination of deformation temperature of plastics - Part 2. Plastics, hard rubber and long fibres Dimensional reinforced composites (ISO 75-2.2003, IDT); Plastics -- Determination of deformation temperature of plastics - Part 3. High-strength thermosetting laminates Material (ISO 75-3.2003, IDT). ● Replace ISO 1817 with GB/T 1690 modified to international standards. ● Replaced ISO 4647.1982 with GB/T 2942 modified to international standards. ● Replace ISO 868 with GB/T 2411, which is not equivalent to the international standard. ● Replace ISO 1431-1.2004 with GB/T 7762, which is equivalent to the international standard. ● Replace ISO 4649 with GB/T 9867, which is equivalent to the international standard. ● Replace ISO 34-2 with GB/T 12829, which is equivalent to the international standard. ● Replace ISO 812 with GB/T 15256, which is equivalent to the international standard. ● Replace ISO 10474 with GB/T 18253, which is not equivalent to the international standard. ● Replace ISO 15156 (all parts) with GB/T 20972 (all parts) modified to international standards, two standards The degree of consistency between the parts is as follows. ◆ GB/T 20972.1-2007 Oil and gas industry oil and gas mining for materials containing hydrogen sulfide environment Part 1. General principles for the selection of crack-resistant materials (ISO 15156-1.2001, IDT); ◆ GB/T 20972.2-2008 Oil and gas industry oil and gas mining for materials containing hydrogen sulfide environment Part 2. anti-cracking carbon steel, low alloy steel and cast iron (ISO 15156-2.2003, MOD); ◆ GB/T 20972.3-2008 Oil and gas industry oil and gas mining for materials containing hydrogen sulfide environment Part 3. Anti-cracking corrosion resistant alloys and other alloys (ISO 15156-3.2003, MOD). ● Replace ISO 13628-4 with GB/T 21412.4 equivalent to the international standard. ● Replace ISO 10423 with GB/T 22513 modified to international standards. ● Replaced ISO 16120-1 with GB/T 24242.1 modified to international standards. For ease of use, the following editorial changes have been made to this section. --- Removed Appendix C of ISO 13628-10.2005. --- Use our legal measurement unit instead of the English unit of measurement. This part is proposed and managed by the National Oil and Gas Standardization Technical Committee (SAC/TC355). This section drafted by. CNOOC Research Institute Limited Liability Company. Drafters of this section. Jia Xu, Huang Jun, Hou Jing, Zhang Enyong, Zou Xing, Liu Xiaoxia, Jia Lusheng, Ni Wei, Wang Dejun, Jing Haiyong, Liu Yi.

Introduction

According to the specific situation of our country, we use our data and quantitative calculation methods. The measurement unit is mainly based on the legal measurement unit in China, that is, the value of the legal measurement unit in China is in the front, and the corresponding value of the English unit is included in the subsequent Within the number. In order to not change the original standard formula, the shape characteristics, constants and coefficients of the curve, the original units are still in English, and the English units are still used. Oil and gas industry Design and operation of underwater production systems Part 10. Adhesive flexible pipe specifications

1 Scope

This part of GB/T 21412 specifies the technical requirements for the design and manufacture of adhesive flexible tubes in terms of safety, size and function. typical See Figure 1 for an illustration of the adhesive flexible tube. Minimum requirements for design, material selection, manufacturing, testing, marking and packaging of adhesive flexible tubes See the specifications and standards that have been used. Guidelines for flexible tubes and accessory parts can be found in APIRP17B. Description. 1---overwound layer; 5--strength layer; 2---cladding layer; 6---breaking layer; 3---breaking layer; 7---liner layer; 4---buffer layer; 8---skeleton layer. Figure 1 Typical adhesive flexible tube This section applies to the assembly of adhesive flexible tubing, including flexible tubing and end fitting assembly at both ends. This section applies to flexible pipes of non-metallic reinforcing layers, although it cannot be completely solved in its specific and unique technical problems. This section applies to bonded flexible tubes containing materials and layered structures covered by ISO 13628-2. This section applies to both sweet and acidic media, including external delivery and infusion applications. The medium being transported includes oil, gas, water and chemical injection. This section applies to static and dynamic flexible pipes used in oil pipes, risers, jumpers and offshore loading and unloading hoses. This section applies to design pressure Flexible pipes with a force greater than or equal to 1.5 MPa (15 bar) are also suitable for flexible pipes of low design pressure, although these flexible pipes are not specified. Design requirements. The guidelines for these flexible tubes can be performed with reference to OCIMF. This section applies to piling hammers, torches for gas supply, water supply and jets, although it does not address these needs. Special technology. This section does not apply to flexible pipes used in kill and choke pipes. The application of killing and choke pipes can be referred to APISpec16C Guidelines. This section does not apply to non-adhesive flexible tubes. Non-adhesive flexible pipe guidelines can be found in ISO 13628-2.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 21412.10-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 21412.10-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 21412.10-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 21412.10-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.