HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 20081.1-2021 English PDF

US$264.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20081.1-2021: Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
Status: Valid

GB/T 20081.1: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 20081.1-2021English264 Add to Cart 3 days [Need to translate] Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements Valid GB/T 20081.1-2021
GB/T 20081.1-2006English439 Add to Cart 3 days [Need to translate] Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements Obsolete GB/T 20081.1-2006

PDF similar to GB/T 20081.1-2021


Standard similar to GB/T 20081.1-2021

GB/T 20080   GB/T 17491   GB/T 20082   GB/T 22107   GB/T 20081.3   GB/T 20081.2   

Basic data

Standard ID GB/T 20081.1-2021 (GB/T20081.1-2021)
Description (Translated English) Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J20
Word Count Estimation 14,144
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 20081.1-2021: Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements



---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1.Main characteristics to be included in literature from suppliers and product-marking requirements ICS 23.100.50 CCSJ20 National Standards of People's Republic of China Replace GB/T 20081.1-2006 Pneumatic pressure reducing valve and filter pressure reducing valve Part 1.What should be included in the business document Main features and product identification requirements (ISO 6953-1.2015, IDT) Released on 2021-08-20 and implemented on 2022-03-01 State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅰ Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Technical requirements 2 5 Operation and maintenance 7 6 Logo 7 7 Marking description 7 Appendix A (informative) ISO 1179-1.1981 port size 8 Reference 9

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is the first part of GB/T 20081 "Pneumatic Pressure Reducing Valves and Filter Pressure Reducing Valves". GB/T 20081 has released the following part. ---Part 1.The main characteristics and product identification requirements that should be included in the business documents; ---Part 2.Test methods for evaluating the main characteristics that should be included in the business documents; ---Part 3.Alternative methods for testing the flow characteristics of the pressure reducing valve. This document replaces GB/T 20081.1-2006 "Pneumatic Pressure Reducing Valves and Filter Pressure Reducing Valves Part 1.The main items that should be included in commercial documents Compared with GB/T 20081.1-2006, except for editorial changes, the main technical changes are as follows. a) Modified the "scope" (see Chapter 1, Chapter 1 of the.2006 edition); b) Modified "Normative Reference Documents" (see Chapter 2, Chapter 2 of the.2006 edition); c) Modified "Terms and Definitions" (see Chapter 3, Chapter 3 of the.2006 edition); d) Modified "Figure 1" (see Figure 1, Figure 1 of the.2006 edition); e) Modified the "Flow-Pressure Characteristics" (see 4.3.3, 4.3.3 of the.2006 edition); f) Modified the "pressure regulation characteristics" (see 4.3.4, 4.3.4 of the.2006 edition); g) Deleted the "Overflow Characteristics" and "Overflow Characteristics" graphs (see 4.3.5 and Figure 4 in the.2006 edition); h) The graphs of "Pilot Pressure-Adjusting Pressure Characteristics" and "Pilot Pressure-Adjusting Pressure Characteristics" have been added (see 4.3.5 and Figure 4); i) Added "linearity" (see 4.3.5.2); j) Added "pilot pressure-adjusting pressure hysteresis" (see 4.3.5.3); k) Added "repeatability" (see 4.3.6); l) Added "resolution of pilot-operated pressure reducing valve with exhaust function" (see 4.3.7); m) Added "the maximum air consumption of a pilot-operated pressure reducing valve with exhaust function when the forward flow or overflow flow is zero" (see 4.3.8); n) Modified the "Capacity of the Reservoir Cup" (see 4.3.9, 4.3.6 of the.2006 edition); o) Modified "Operation and Maintenance" (see Chapter 5, Chapter 5 of the.2006 edition); p) Modified "Identification" (see Chapter 6, Chapter 6 of the.2006 edition); q) An appendix (see appendix A) has been added for the size of the air port. This document uses the translation method to be equivalent to ISO 6953-1.2015 "Pneumatic Pressure Reducing Valves and Filter Pressure Reducing Valves Part 1.Commercial Documents The main characteristics and product identification requirements to be included in the ". The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows. ---GB/T 2346-2003 Nominal pressure series of fluid transmission systems and components (ISO 2944.2000, MOD); ---GB/T 7306.1-2000 55° sealed pipe thread Part 1.Cylindrical internal thread and tapered external thread (eqvISO 7-1. 1994); ---GB/T 7306.2-2000 55° Sealed Pipe Thread Part 2.Conical Internal Thread and Conical External Thread (eqvISO 7-1. 1994); ---GB/T 14513.1-2017 Determination of flow characteristics of compressible fluid components used in pneumatics Part 1.Steady-state flow General rules and test methods (ISO 6358-1.2013, IDT); ---GB/T 17446-2012 Fluid Power System and Components Vocabulary (ISO 5598.2008, IDT); ---GB/T 32215-2015 pneumatic control valve and other components of the port and control mechanism identification (ISO 11727..1999, IDT); ---GB/T 39956.1-2021 Pneumatic electro-pneumatic pressure control valve Part 1.Main characteristics that should be included in commercial documents (ISO 10094-1.2010, IDT). For ease of use, this document has made the following editorial changes. ---The pressure unit "kPa" in the international standard is changed to "MPa"; ---In order to maintain consistency, the dm3/s in Figure 3 is changed to dm3/min; --- Corrected a few editorial errors in ISO 6953-1.2015, and changed the linearity "Δpl" in 4.3.5.2 to "L"; changed The "Δph" of the hysteresis in 4.3.5.3 was changed to "H"; --- Corrected a few editorial errors in ISO 6953-1.2015, and revised "10.3.4" in the second paragraph of 4.3.6 to "10.3.3"; Amend "10.2.4" in paragraph 2 of 4.3.7 to "10.2.3". Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3). Drafting organizations of this document. Ningbo Jiaerling Pneumatic Machinery Co., Ltd., National Pneumatic Product Quality Supervision and Inspection Center, Ningbo AirAsia Donghua Industry Co., Ltd., Zhejiang Yiri Pneumatic Technology Co., Ltd., Beijing Machinery Industry Automation Research Institute Co., Ltd. The main drafters of this document. Shan Junbo, Yan Ruikang, Liu Lijiao, Fang Qinghua, Ren Cheli, Cao Qiaohui. The previous versions of this document and the documents replaced are as follows. ---In.2006, it was first published as GB/T 20081.1-2006; ---This is the first revision.

Introduction

In a pneumatic system, power is transmitted and controlled by compressed air in the loop. Need to reduce or adjust the pressure in the circuit, various reductions Pressure valve and filter pressure reducing valve are components designed to maintain stable air pressure. Therefore, it is necessary to understand some of the performance characteristics of these components to Then determine the adaptability of their application. GB/T 20081 is composed of three parts. ---Part 1.The main characteristics and product identification requirements that should be included in the business documents. The purpose is to stipulate that the business documents should include The main characteristics and product identification requirements of the included pressure reducing valve and filter pressure reducing valve. ---Part 2.Test methods to assess the main characteristics that should be included in the business documents. The purpose is to stipulate according to GB/T 20081.1 The main characteristics of the pneumatic pressure reducing valve and filter pressure reducing valve included in the business documents are tested, the test items, test procedures, and The presentation method of test results. ---Part 3.Alternative methods for testing the flow characteristics of the pressure reducing valve. The purpose is to specify optional tests for testing the flow characteristics of pneumatic components. Pneumatic pressure reducing valve and filter pressure reducing valve Part 1.What should be included in the business document Main features and product identification requirements

1 Scope

This document specifies the main characteristics and product identification requirements of pressure reducing valves and filter pressure reducing valves contained in commercial documents. This document applies to the following pressure reducing valves and filter pressure reducing valves. ---Manually controlled direct-acting type (with or without overflow device); ---Manually control the internal pilot type (such as. nozzle baffle); ---External pilot type. This document applies to pressure reducing valves whose rated inlet pressure does not exceed 2.5 MPa and outlet regulating pressure does not exceed 1.6 MPa, and applies to A filter pressure reducing valve whose rated inlet and outlet regulating pressure does not exceed 1.6 MPa and is decontaminated by mechanical methods. The rated pressure should comply with the recommended pressure selection specified in GB/T 2346. Note 1.1bar=0.1MPa=105Pa; 1MPa=1N/mm2. The rated pressure should be selected from the preferred pressures listed in ISO 2944. Note 2.The main characteristics related to electric-pneumatic pressure control valves in commercial documents are specified in ISO 10094-1.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 20081.2-2021 Pneumatic pressure reducing valve and filter pressure reducing valve Part 2.Evaluation of the main features that should be included in the business document Test method (ISO 6953-2.2015, IDT) GB/T 22108.2-2008 Pneumatic compressed air filter Part 2.Measurement of the main characteristics that should be included in the evaluation business documents Test method (ISO 5782-2.1997, IDT) ISO 7-1.1994 Pipe threads sealed with threads-Part 1.Dimensions, tolerances and markings (Pipethreads where pressure- tightjointsaremadeonthethreads-Part 1.Dimensions, tolerancesanddesignation) ISO 2944 Nominal pressure of fluid power systems and components (Fluidpowersystemsandcomponents-Nominal pressures) IS05598 Fluidpower systems and components-Vocabulary (Fluidpowersystemsandcomponents-Vocabulary) ISO 6358-1 Determination of flow characteristics of compressible fluid components used in pneumatics. Part 1.General rules and tests for steady-state flow Test method (Pneumaticfluidpower-Determinationofflow-ratecharacteristicsofcomponentsusingcom- pressiblefluids-Part 1.Generalrulesandtestmethodsforsteady-stateflow) ISO 10094-1 Pneumatic electro-pneumatic pressure control valve Part 1.Main characteristics to be included in commercial documents (Pneumatic fluidpower-Electro-pneumaticpressurecontrolvalves-Part 1.Maincharacteristicstoincludeinthe supplier'sliterature) ISO 11727 Pneumatic control valve and other components of the port and control mechanism identification (Pneumaticfluidpower-Identi- ficationofportsandcontrolmechanismsofcontrolvalvesandothercomponents)

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 20081.1-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 20081.1-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 20081.1-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20081.1-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 20081.1-2021?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20081.1-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.