|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1936.1-2009: Method of testing in bending strength of wood
Status: Obsolete GB/T 1936.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1936.1-2009 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Method of testing in bending strength of wood
| Obsolete |
GB/T 1936.1-2009
|
| GB/T 1936.1-1991 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Method for testing in bending strength of wood
| Obsolete |
GB/T 1936.1-1991
|
| GB 1936-1980 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Test method for the bending strength and elastic module of wood
| Obsolete |
GB 1936-1980
|
PDF similar to GB/T 1936.1-2009
Basic data | Standard ID | GB/T 1936.1-2009 (GB/T1936.1-2009) | | Description (Translated English) | Method of testing in bending strength of wood | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B60 | | Classification of International Standard | 79.020 | | Word Count Estimation | 6,682 | | Date of Issue | 2009-02-23 | | Date of Implementation | 2009-08-01 | | Older Standard (superseded by this standard) | GB/T 1936.1-1991 | | Quoted Standard | GB/T 1928-2009; GB/T 1929-2009; GB/T 1931-2009 | | Adopted Standard | ISO 3133-1975, MOD | | Regulation (derived from) | National Standard Approval Announcement 2009 No.3 (Total No.143) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the determination of wood bending strength test equipment, test procedure, , specimens calculated results and test reports. This section applies to a small sample timber unblemished flexural strength tests. | GB/T 1936.1-2009: Method of testing in bending strength of wood---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Method of testing in bending strength of wood
ICS 79.020
B60
National Standards of People's Republic of China
Replacing GB/T 1936.1-1991
Wood bending strength test method
(ISO 3133. 1975, Wood-Determinationofultimatestrength
instaticbending, MOD)
Posted 2009-02-23
2009-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 1936 is divided into two parts as follows.
--- GB/T 1936.1 Wood bending strength test method;
--- GB/T 1936.2 Wood bending modulus of elasticity measurement method.
This section GB 1936.1 "Wood bending strength test method."
The partial modification of international standards ISO 3133. 1975 "Wood bending static ultimate strength determination."
This portion of the ISO 3133. 1975 compared to the main technical content differences are as follows.
--- The length of the sample is 300mm ~ 380mm to 300mm;
--- Height than the distance between the centers of two seats and the sample will annex is 12-16 times tested, it should be changed to the distance between two seats
240mm.
GB/T 1936.1-1991 "Wood bending strength test" in this section instead.
This section compared with the GB/T 1936.1-1991 main changes are as follows.
--- Original standard 4.1 "load measurement accuracy should be consistent with GB/T 1928-1991 Chapter 6 requirements," the words "can be measured
Load accuracy of 1% ";
--- Original standard "test equipment GB/T 1931 provisions of Chapter 3," 4.3, to "GB/T 1931-2009 Chapter 3 Regulation
Determination of test equipment given moisture content ";
--- The 6.2 "ring along the tangential direction (tangential) to a uniform rate of loading", the words "between the bearing surface of the sample in the middle of a uniform diameter speed
Degree of loading, "increased" or loading rate as 5mm/min ~ 10mm/min ";
--- All the original standard "to accurately" to "accurate to";
--- The test records the table, "bending strength" and "moisture" two items removed.
Appendix A of this part is a normative appendix.
This part by the State Forestry Administration.
This part of the National Standardization Technical Committee centralized timber.
This section drafted by. China Forestry Science Institute of Wood Industry.
The main drafters of this section. Luo Xiuqin, Ren Haiqing, sub-Yin Fang, Wang Zhaohui, Jiang Jinghui, Zhou Haibin.
This section was first released in 1980, in May 1991 the first amendment.
Wood bending strength test method
1 Scope
This section GB/T 1936 specifies the determination of wood bending strength test equipment, samples, test procedures, and test results of the calculation
report.
This section applies to a small wood unblemished specimens flexural strength test.
2 Normative references
The following documents contain provisions which, through reference to GB/T 1936 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 1928-2009 General physical and mechanical test methods (ISO 3129. 1975, Wood-Samplingmethodsand
generalrequirementsforphysicalandmechanicaltests, NEQ)
GB/T 1929-2009 physical and mechanical test materials and test specimens sawing method (ISO 3129. 1975, Wood-Sampling
methodsandgeneralrequirementsforphysicalandmechanicaltests, MOD)
GB/T 1931-2009 Method for determination of moisture content of wood (ISO 3130. 1975, Wood-Determinationofmoisture
contentforphysicalandmechanicaltests, MOD)
Principle 3
In the center of the length of the sample at a uniform rate of loading to destruction, in order that the bending strength of wood.
4 Test Equipment
4.1 Function Test load measurement accuracy of 1%, and the radius of curvature of the indenter holder end portion of the test apparatus is 30mm, two seat pitch
Off should be 240mm.
Testing should be accurate measuring 4.2 to 0.1mm.
4.3 GB/T 1931-2009 the provisions of Chapter 3 of the test device was measured moisture content.
5 Sample
5.1 test material sawing and test specimens according to GB/T 1929-2009 the provisions of Chapter 3.
5.2 Sample size is 300mm × 20mm × 20mm, a length along the grain direction. Sample preparation requirements and inspection, the sample moisture content
Adjustment respectively GB/T 1928-2009 Chapter 3 and Chapter 4 requirements. Allow the measuring flexural modulus of elasticity using the same sample, the first measurement
Elastic modulus after testing in bending strength.
6 Test procedure
6.1 flexural strength only string to test, sample length central measuring radial dimension of width, height tangential to the nearest 0.1mm.
6.2 use a central loading, the sample was placed in two seat test device, specimen holder in the middle between the radial surface at a uniform rate of loading, in
1min ~ 2min within the sample destroyed (or the loading speed is set at 5mm/min ~ 10mm/min), the failure load into the fill
Appendix A records in the table, precisely to 10N.
6.3 test immediately after the interception of about 20mm long in a wood near the sample destroyed, press GB/T 1931-2009 measurement sample containing
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1936.1-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 1936.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 1936.1-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1936.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 1936.1-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1936.1-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|