|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1930-2009: Method for determination of the annual rings width and latewood rate of wood
Status: Obsolete GB/T 1930: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1930-2009 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Method for determination of the annual rings width and latewood rate of wood
| Obsolete |
GB/T 1930-2009
|
| GB/T 1930-1991 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Method for determination of the annual rings width and latewood rate of wood
| Obsolete |
GB/T 1930-1991
|
PDF similar to GB/T 1930-2009
Basic data | Standard ID | GB/T 1930-2009 (GB/T1930-2009) | | Description (Translated English) | Method for determination of the annual rings width and latewood rate of wood | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B60 | | Classification of International Standard | 79.020 | | Word Count Estimation | 6,645 | | Date of Issue | 2009-02-23 | | Date of Implementation | 2009-08-01 | | Older Standard (superseded by this standard) | GB/T 1930-1991 | | Quoted Standard | GB/T 1928-2009; GB/T 1929-2009 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.3 (Total No.143) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the determination of wood and late wood ring width ratio of test equipment, specimens, test procedures and results of calculations. This standard applies to the determination of the average width of the transverse section wood rings and a full evening of each timber clearly distinguish each complete ring of wood in the percentage of late wood. | GB/T 1930-2009: Method for determination of the annual rings width and latewood rate of wood---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Method for determination of the annual rings width and latewood rate of wood
ICS 79.020
B60
National Standards of People's Republic of China
Replacing GB/T 1930-1991
Wood ring width and latewood rate determination method
Posted 2009-02-23
2009-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 1930-1991 "wood ring width and latewood rate determination method."
This standard compared with GB/T 1930-1991 The main changes are as follows.
--- Average width in the range of "cross-section of each timber, and sooner or later the whole ring of the obvious difference between each whole timber wood rings in latewood
The percent of each "to" complete transverse section of each timber and an average width of annual rings of wood obvious difference between morning and evening wood
Complete ring in the percent of late wood ";
--- Referenced standard is "GB 1941 Wood hardness test" was changed to "GB/T 1928-2009 square wood physical and mechanical tests
Law General "and" intercept method "GB/T 1929-2009 wood sawing wood physical and mechanical tests and samples;
--- The Chapter 5, "Sample" requirement was changed to "hardness of the sample using 5.1 or .5.2 specimen sample preparation using specially made to
Check sum according to the provisions of GB/T 1928-2009 Chapter 3 will be ";
--- The 6.1 "at the end surface of the sample, according to a straight line radial" to "the specimen in the transverse plane, has been designated by the perpendicular to the radial ring
Line ", delete the words" will fill the measurement results in Appendix A "requirements;
--- Detailed test requirements increase the preparation of the report, and accordingly made some changes to Appendix A.
Appendix A of this standard is a normative appendix.
This standard was proposed by the State Forestry Administration.
This standard by the National Standardization Technical Committee timber.
This standard was drafted. China Forestry Science Institute of Wood Industry.
Participated in the drafting of this standard. Chinese Academy of Forestry Forestry Institute for New Technologies.
The main drafters of this standard. this fee Hua, Huang Anmin, Zhaorong Jun, Yu Huaqiang, Lv Jianxiong, Huangrong Feng, Zhao ke.
This standard was first published in 1980, the first revision in 1991, this is the second revision.
This standard by the National Standardization Technical Committee responsible for the interpretation of wood.
Wood ring width and latewood rate determination method
1 Scope
This standard specifies the determination timber ring width and latewood rate test equipment, samples, test procedures and results of calculations.
This standard applies to the determination of the average width of the late wood in transverse section of each complete ring of material and sooner or later, obviously distinguish each complete ring of wood
The percent of material.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1928-2009 physical and mechanical test methods - General
GB/T 1929-2009 physical and mechanical test materials and test specimens sawing method
Principle 3
All measurement sample of the total width of the entire ring, and the number of late wood to determine its average width and latewood ring rate.
4 Test Equipment
Measuring test, measurements should be accurate to 0.01mm.
5 Sample
5.1 or hardness of the sample using the sample using specially made.
5.2 Sample production requirements and inspections according to the provisions of GB/T 1928-2009 Chapter 3 performed.
6 Test procedure
6.1 specimen transverse plane, perpendicular to the radial ring by a straight line, along a straight line to determine a total width of the ring portion of the whole, accurate to 0.01mm,
And count the number of rings in the measurement range.
6.2 in the range of the entire sample ring total width, measure the width of each ring of late wood, accurate to 0.01mm.
7 Results Calculation
(1) calculate the average width of 7.1 sample style rings shall be accurate to 0.1mm.
R = Chou Chou shape
(1)
Where.
--- R Chou average width of the specimen ring, in millimeters (mm);
The total width of the entire ring within the range of the measurement sample Chou --- millimeters (mm);
Integer number of ring-shaped inner --- measurement sample range is detected.
(2) the calculation formula should be 7.2 latewood percentage, to the nearest 1%.
Lw = ΣL Chouchou × 100
(2)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1930-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 1930-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 1930-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1930-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 1930-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1930-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|