HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 19148.1-2008 English PDF

US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19148.1-2008: Types and dimensions of lamp holders -- Part 1: Screw lamp holder
Status: Valid

GB/T 19148.1: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 19148.1-2008English299 Add to Cart 3 days [Need to translate] Types and dimensions of lamp holders -- Part 1: Screw lamp holder Valid GB/T 19148.1-2008
GB 19148.1-2003English399 Add to Cart 3 days [Need to translate] Types and dimensions of Edison screw lamp holders Obsolete GB 19148.1-2003

PDF similar to GB/T 19148.1-2008


Standard similar to GB/T 19148.1-2008

GB/T 9473   GB/T 24825   GB/T 32483.2   GB/T 19148.3   GB/T 19148.4   GB/T 19148.5   

Basic data

Standard ID GB/T 19148.1-2008 (GB/T19148.1-2008)
Description (Translated English) Types and dimensions of lamp holders -- Part 1: Screw lamp holder
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K74
Classification of International Standard 29.140.10
Word Count Estimation 13,173
Date of Issue 2008-04-29
Date of Implementation 2008-12-01
Older Standard (superseded by this standard) GB 19148.1-2003
Quoted Standard GB/T 1406.1; GB/T 1483.1; GB/T 21098
Adopted Standard IEC 600610-2-2004, MOD
Regulation (derived from) Announcement of Newly Approved National Standards No. 6, 2008 (No. 119 overall)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the screw lampholders types and dimensions. This section applies to screw lampholders design, manufacturing and testing.

GB/T 19148.1-2008: Types and dimensions of lamp holders -- Part 1: Screw lamp holder

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Types and dimensions of lampholders Part 1. Screw lampholder ICS 29.140.10 K74 National Standards of People's Republic of China Replacing GB 19148.1-2003 Lamp holder type and size Part 1. screw lampholders (IEC 60061-2.2004, Lampcapsandholderstogetherwithgaugesforthe controlofinterchangeabilityandsafety-Part 2. Lampholders, MOD) Posted 2008-04-29 2008-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 19148 "lamp socket type and size" is divided into five sections. --- Part 1. screw lampholders; --- Part 2. Pin lampholders; --- Part 3. pre-focus lamp holder; --- Part 4. Miscellaneous lampholders; --- Part 5. Bayonet holder. This section GB/T 19148 Part 1. The partial modification using IEC 60061-2.2004 "lamp holders and the amount of test its safety and interchangeability regulation Part 2. Lampholders" (Version 3.32) in English. This part of IEC 60061-2.2004 (3.32 version) English version of the section on the type and size of screw lampholders technical content On exactly the same. This section relating to E12, E17, E26 and E39 lampholder technical content, only for production, marketing, inspection and other departments to use when exporting, but For security, compatibility and other factors are not allowed to use in our country. At the same time the expression of international standards to fit our standard formulation. For ease of use, this section made the following editorial changes. a) "this International Standard" be replaced by "this section"; b) use a decimal point instead of a decimal point ",". ","; c) Remove the preface to international standards. This Part replaces GB 19148.1-2003 "screw lampholders type and size." Some of the major differences compared with GB 19148.1-2003 this as follows. --- Retains the technical contents of the original GB 19148.1-2003 entire lamp socket; --- Added E11, E26, E26d and technical content E39 lamp holder. This part is proposed by the China National Light Industry Council. This part of the National Electric lighting Standardization Technical Committee (SAC/TC224) centralized. This part mainly drafted by. Jintan Huatai Electric Co., Ltd., Beijing Institute of electric light. The main drafters of this section. Xiasuo Rong, Zhao Xiurong, Jiang Shan. This part of the standard replaces the previous editions are. --- GB 19148.1-2003. Lamp holder type and size Part 1. screw lampholders

1 Scope

This section provides screw lampholders types and dimensions. This section applies to screw lampholders design, manufacture and testing.

2 Normative references

The following documents contain provisions which, through reference GB/T 19148 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 1406.1 lamp types and dimensions - Part 1. screw-on cap (GB/T 1406.1-2008, IEC 60061-1. 2005, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeabilityandsafety- Part 1. Lampcaps, MOD) GB/T 1483.1 Lamp caps Gauges - Part 1. Screw-type lamp holder gauge (GB/T 1483.1-2008, IEC 60061-3.2004, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeability andsafety-Part 3. Gauges, MOD) GB/T 21098 Lamp caps and test its safety and interchangeability of gauges - Part 4. Guidelines and general information (GB/T 21098-2007, IEC 60061-4.2004, IDT)

3 type and size

Lampholder models shall comply with GB/T 21098 of.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19148.1-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19148.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19148.1-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19148.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 19148.1-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19148.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.