|
US$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18750-2022: Municipal solid waste incinerator and heat recovery boiler
Status: Valid GB/T 18750: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18750-2022 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Municipal solid waste incinerator and heat recovery boiler
| Valid |
GB/T 18750-2022
|
| GB/T 18750-2008 | English | 479 |
Add to Cart
|
3 days [Need to translate]
|
Municipal solid waste incinerator and boiler
| Obsolete |
GB/T 18750-2008
|
| GB/T 18750-2002 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Municipal solid waste incineration boiler
| Obsolete |
GB/T 18750-2002
|
PDF similar to GB/T 18750-2022
Basic data | Standard ID | GB/T 18750-2022 (GB/T18750-2022) | | Description (Translated English) | Municipal solid waste incinerator and heat recovery boiler | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J98 | | Classification of International Standard | 27.060.01 | | Word Count Estimation | 18,156 | | Date of Issue | 2022-12-30 | | Date of Implementation | 2023-07-01 | | Older Standard (superseded by this standard) | GB/T 18750-2008 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 18750-2022: Municipal solid waste incinerator and heat recovery boiler---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 27.060.01
CCSJ98
National Standards of People's Republic of China
Replacing GB/T 18750-2008
Domestic waste incinerator and waste heat boiler
Posted on 2022-12-30
2023-07-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 categories 3
5 Model 4
6 General requirements 4
7 Performance requirements 8
8 Test method 8
9 factory inspection 8
10 Logo, painting, packaging and accompanying documents 9
Appendix A (Normative) Technical Requirements for Incinerators 10
Appendix B (informative) Schematic diagram of the structure of the waste heat boiler body 12
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document replaces GB/T 18750-2008 "Household Waste Incinerator and Waste Heat Boiler". Compared with GB/T 18750-2008, except
In addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) The scope of application has been changed (see Chapter 1, Chapter 1 of the.2008 edition);
b) Deleted the terms "domestic waste incinerator", "mechanical grate type domestic waste incinerator" and "fluidized bed type domestic waste incinerator"
"Rotary kiln type domestic waste incinerator", "domestic waste incineration capacity", "domestic waste incineration residue", "domestic waste incinerator
slag", "domestic waste incineration fly ash", "auxiliary combustion" and "incineration short circuit" (see 3.1, 3.4~3.12 of the.2008 edition);
c) Changed the definitions of the terms "domestic waste incinerator" and "waste heat boiler" (see 3.1, 3.2, 3.2, 3.3 of the.2008 edition);
d) Added "fire grate", "furnace chamber", "rated waste incineration capacity", "low calorific value at design point", "mechanical load of fire grate", "rated working conditions" and "furnace chamber
The terms and definitions of "main control temperature", "rated heat load", "rated flue gas volume", "rated evaporation capacity", "main burner" and "main burner" (see
3.3~3.14);
e) Changed the classification of incinerators according to the rated amount of waste incinerated (see 4.1, 4.1 of the.2008 edition);
f) Deleted the classification of incinerators according to their combustion methods (see 4.2 of the.2008 edition);
g) Increased the classification of waste heat boilers according to the body structure type (see 4.2);
h) Increased the classification of waste heat boilers according to steam pressure (see 4.3);
i) The model representation of incinerators and waste heat boilers has been changed (see Chapter 5, Chapter 5 of the.2008 edition);
j) Changed the requirements for furnace waste (see 6.1, 6.1 of the.2008 edition);
k) Increased product design requirements for incinerators and waste heat boilers (see 6.2.1);
l) The combustion diagram and its drawing requirements are added (see 6.2.2);
m) Added automatic combustion control system function (see 6.2.4);
n) Increase the layout and determination method of the furnace main control temperature monitoring point (see 6.2.5);
o) Changed furnace temperature requirements (see 6.2.6, 6.2.7 of the.2008 edition);
p) Deleted the requirement for incineration short-circuit (see 6.2.14 of the.2008 edition);
q) Changed the design life requirements for incinerators and waste heat boilers (see 6.2.10, 6.5.6 of the.2008 edition);
r) Changed the total heat load requirements of the main burner and auxiliary burner (see 6.3.3, 6.2.10 of the.2008 edition);
s) The incinerator should adopt low-nitrogen combustion technology requirements such as flue gas recirculation (see 6.3.4);
t) Changed the allowable deviation of superheated steam temperature (see 6.4.5, 6.4.2.3 of the.2008 edition);
u) Increased the requirements for denitrification agent nozzles (see 6.4.8);
v) Increased performance index requirements for incinerators and waste heat boilers that can be verified by tests (see Chapter 7);
w) Changed the requirements for the thermal ignition loss rate of incinerator slag (see 7.4, 6.2.13 of the.2008 edition);
x) The requirements for the concentration of carbon monoxide in the flue gas exhausted from the waste heat boiler outlet have been added (see 7.5);
y) Changed the design heat efficiency requirements for incinerators and waste heat boilers (see 7.8, 6.5.5 of the.2008 edition);
z) Changed the method for measuring the low-level calorific value of waste entering the furnace (see 8.1, 7.1 of the.2008 edition);
aa) The determination and calculation method of thermal ignition loss rate of incinerator slag has been changed (see 8.4, 7.2 of the.2008 edition);
bb) Added the determination method for waste heat boiler feed water quality indicators (see 8.6);
cc) Changed the requirements for the nameplate of the incinerator (see 10.2, 9.1 of the.2008 edition);
dd) Change the nameplate requirements for waste heat boilers (see 10.3, 9.1 of the.2008 edition);
ee) Change the coating and packaging requirements for incinerators and waste heat boilers (see 10.4, 9.2 of the.2008 edition);
ff) Changed the random document requirements for incinerators and waste heat boilers (see 10.5, 9.3 of the.2008 edition).
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China.
This document is under the jurisdiction of the National Urban Environmental Sanitation Standardization Technical Committee (SAC/TC451).
This document is drafted by. Chongqing Sanfeng Environmental Group Co., Ltd., Chongqing Sanfeng Covanta Environmental Industry Co., Ltd., Shanghai Environmental
Environmental Engineering Design Research Institute Co., Ltd., Shanghai Kangheng Environmental Co., Ltd., Beijing Zhongke Runyu Environmental Protection Technology Co., Ltd.,
Everbright Environmental Technology (China) Co., Ltd., Shenzhen Energy Environmental Protection Co., Ltd., Guangzhou Environmental Protection Investment Group Co., Ltd., China Tianzhu
Co., Ltd., Hangzhou New Century Energy and Environmental Protection Engineering Co., Ltd., Jianglian Heavy Industry Group Co., Ltd., Nantong Wanda Energy Power
Technology Co., Ltd., Anhui Jinding Boiler Co., Ltd., Wuxi Yigang Refractory Co., Ltd., Yixing Zhongdian Wear-resistant and Refractory Technology
Co., Ltd., Zhengzhou Naidure Ceramics Co., Ltd.
The main drafters of this document. Lei Qinping, Wu Chonglu, Liu Siming, Zeng Xianqiong, Peng Zejun, Yang Wei, Huang Hui, Qiu Tingting, Si Jingzhong, Ding Tangwen,
Wang Dingguo, Zhang Baozhen, Long Jisheng, Li Zhuoge, Shao Zheru, Ji Hongquan, Jiao Xuejun, Zhang Xingqun, Liu Hai, Wang Jiahong, Gong Cheng, Liu Changfeng, Li Jun,
Li Yu, He Lei, Tang Guohua, Peng Hong, Liu Minggang, Liu Gang, Liu Xianrong, Chen Zhu, Zhang Huanheng, Zhong Rigang, Bai Li, Wang Ke, Qu Zhaozhou, Guo Zhenning,
Duan Zhihua, Lei Ming, He Zhigang, Xu Feng, Yin Huikun, Huang Xinghua, Ying Liping, Yuan Genfang, Wang Wenzhan, Deng Yong, Zhang Lei, Zhu Cailin, Liao Hongzhao,
Jiang Xuhui, Xia Binhao, He Yu, Zheng Xueyan, Zhang Peng.
This document was first released in.2002, revised for the first time in.2008, and this is the second revision.
Domestic waste incinerator and waste heat boiler
1 Scope
This document specifies the classification, model, general requirements, performance requirements, test methods, factory inspection,
Logo, painting, packing and accompanying documents.
This document is applicable to the design, manufacture, test and acceptance of mechanical grate incinerators and waste heat boilers for the incineration of domestic waste.
Type domestic waste incinerators and waste heat boilers can be implemented by reference.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 1576 Industrial Boiler Water Quality
GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components
GB 4053 (all parts) Safety requirements for fixed steel ladders and platforms
GB/T 10180 Industrial Boiler Thermal Performance Test Regulations
GB/T 10184 Performance Test Procedures for Power Plant Boilers
GB/T 12145 Water vapor quality of thermal power generating units and steam power equipment
GB/T 14039 code for the pollution level of solid particles in hydraulic transmission oil
GB/T 16507 (all parts) water tube boilers
GB/T 16618 General Rules for Thermal Insulation Technology of Industrial Furnaces
GB 18485 Pollution Control Standard for Domestic Garbage Incineration
GB/T 22395 Code for Design of Boiler Steel Structure
GB/T 36699 Specifications for Liquid and Gas Fuel Burners for Boilers
GB 50126 Construction Code for Industrial Equipment and Pipeline Thermal Insulation Engineering
GB/T 50185 Construction Quality Acceptance Standard for Industrial Equipment and Pipeline Insulation Engineering
GB 50264 Code for Design of Industrial Equipment and Pipeline Thermal Insulation Engineering
GB 50273 Construction and Acceptance Standards for Boiler Installation Engineering
CJ/T 313 Domestic Waste Sampling and Analysis Methods
CJJ90 Domestic waste incineration engineering technical specification
DL/T 5072 Code for design of thermal insulation paint for power plants
DL5190.2 Construction Technical Specifications for Electric Power Construction Part 2.Boiler Units
DL/T 5210.2 Construction Quality Acceptance Regulations for Electric Power Construction Part 2.Boiler Units
DL/T 5704 Thermal Power Plant Thermal Equipment and Pipeline Insulation and Anticorrosion Construction Quality Acceptance Regulations
DL5713 Thermal Power Plant Thermal Equipment and Pipeline Insulation Construction Technology Guidelines
DL5714 Thermal Power Plant Thermal Equipment and Pipeline Insulation and Anticorrosion Construction Technical Specifications
HJ/T 44 Determination of Carbon Monoxide in Exhaust from Stationary Pollution Sources Non-dispersive Infrared Absorption Method
HJ228 Technical Specifications for Centralized Treatment Engineering of Chemical Disinfection of Medical Waste
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18750-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 18750-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 18750-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18750-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 18750-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18750-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|