GB/T 18607: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18607-2017 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Petroleum and natural gas industries -- Drilling and production equipment -- Reciprocating full liner pump
| Valid |
GB/T 18607-2017
|
| GB/T 18607-2008 | English | RFQ |
ASK
|
6 days [Need to translate]
|
Specification for subsurface sucker rod pumps and fittings
| Obsolete |
GB/T 18607-2008
|
| GB/T 18607-2001 | English | RFQ |
ASK
|
11 days [Need to translate]
|
Pump and its component specification
| Obsolete |
GB/T 18607-2001
|
PDF similar to GB/T 18607-2017
Basic data | Standard ID | GB/T 18607-2017 (GB/T18607-2017) | | Description (Translated English) | Petroleum and natural gas industries -- Drilling and production equipment -- Reciprocating full liner pump | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E92 | | Classification of International Standard | 75.180.10 | | Word Count Estimation | 118,183 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 18607-2017: Petroleum and natural gas industries -- Drilling and production equipment -- Reciprocating full liner pump
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Petroleum and natural gas industries-Drilling and production equipment-Reciprocating full liner pump
ICS 75.180.10
E92
National Standards of People's Republic of China
Replacing GB/T 18607-2008
Oil and gas industry
Drilling and oil extraction equipment reciprocating whole cylinder pump
Published on.2017-12-29
2018-07-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration released
Directory
Preface III
1 Scope 1
2 Normative references 1
3 Terms, definitions, symbols, and abbreviations 1
4 Functional requirements 5
5 Technical Requirements 6
6 Manufacturer Requirements 6
Appendix A (Normative) Suction pump assembly 10
Appendix B (Normative Appendix) Suction Pump Parts 21
Appendix C (normative) Measurement, test and inspection 85
Appendix D (Normative) Mark 86
Appendix E (Normative Appendix) Material 87
Appendix F (Normative) Threaded connections 93
Appendix G (Informative Appendix) Rod pumping system Figure 106
Appendix H (Informative) The clearance gap between the metal plunger and the pump cylinder 107
Appendix I (informative) Pump assembly sealing performance test pressure recommendation 108
Appendix J (informative annex) Maximum clearance loss recommendation value of 109
Appendix K (Informative) Metric Common Thread Size 110 for Suction Pumps and Parts Thereof
Appendix L (informative) This standard and APISpec11AX.2015 (13th edition) technical differences and their causes 111
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 18607-2008 "Pumping pump and its components specification", compared with GB/T 18607-2008, the main technical changes
As follows.
---Modified the standard name;
--- Added 19 terms and definitions such as "100% inspection, batch processing, calibration standards, carbonitriding" (see 3.1);
--- Added "symbols and abbreviations" (see 3.2 and 3.3);
--- Added "functional requirements" (see Chapter 4);
--- Increased material requirements (see 5.2);
--- Added "Manufacturer Requirements" (see Chapter 6);
--- Added "qualification of personnel, acceptance criteria, unqualified production process, coating, heat treatment furnace instrument, ultrasonic and magnetic powder nondestructive testing
(NDT), Product Markings and Record Content (see 6.1.3, 6.1.4, 6.1.5, 6.1.6, 6.1.7, 6.1.8, 6.2 and 6.3);
--- Added "27.0 (11⁄4) 106 specification pump" in the main part numbering system (see Table B.1);
--- Added "pump pumping system diagram" (see Appendix G);
--- Added an informative appendix "Metric Common Thread Sizes for Suction Pumps and their Components" (see Annex K);
---Increase the informative appendice "This standard and APISpec11AX.2015 (13th edition) technical differences and its causes" (see attached
Record L).
This standard is proposed and managed by the National Oil Drilling Equipment and Tools Standardization Technical Committee (SAC/TC96).
This standard was drafted. China National Petroleum Corporation Yumen Oilfield Branch Machinery Plant, CNPC Drilling Engineering Technology
Institute Jianghan Machinery Research Institute, Tieling Zhongyou Machinery Equipment Manufacturing Co., Ltd., Xianyang Gem Steel Pipe Steel Wire Rope Co., Ltd., China Petroleum Day
Natural Gas Co., Ltd. Liaohe Oilfield Branch, CNPC Bohai Petroleum Equipment Manufacturing Co., Ltd. New Century Machinery Manufacturing Branch,
Shengli Oilfield Plateau Petroleum Equipment Co., Ltd.
The main drafters of this standard. Jia Bo, Tang Liangwen, Zheng Lei, Liu Lianwei, Zhong Yonghai, Wang Mingqiao, Liu Xiangnan, Li Jiyun, Yan Xiuwen, Yan Xiaolong,
Zhang Wei, Xiao Li, Wang Zhiming, Wu Qinghe, Yang Song, Zhu Heng, Lang Fan, Zhang Yushu, Liu Hongcui, Gang Ruichao.
The previous versions of the standard replaced by this standard are.
--- GB/T 18607-2001, GB/T 18607-2008.
Oil and gas industry
Drilling and oil extraction equipment reciprocating whole cylinder pump
1 Scope
This standard specifies a reciprocating full barrel pump used in the rod pumping system used in the oil and gas industry (hereinafter referred to as the pump).
Design requirements and test methods.
This standard applies to the general pump diameter pump assembly (including rod pump and tube pump), parts and components of rod pumping system. for
Ensuring that all parts are standardized and interchangeable provides sufficient size requirements.
Note. This standard has detailed provisions for many parts and components, so no design package is required. However, some parts require design packages that are organized in tables
B.9~Table B.17, B.21, B.22, B.27, B.29, B.31, B.32, B.36, B.37, B.38, B.39, B .40, B.43, B.48, B.52, B.53, B.54,
B.58.
This standard does not apply to the design of a special pump, nor does it include the installation, operation and maintenance of a pump. About installation, operation and maintenance
See SY/T 5188 for details.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 197 Common thread tolerances (GB/T 197-2003, ISO 965-1.1998, MOD)
GB/T 228.1 Tensile test of metallic materials - Part 1. Test method for room temperature (GB/T 228.1-2010, ISO 6892-1.
2009, MOD)
GB/T 230.1 Rockwell hardness test for metallic materials - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T
Ruler (GB/T 230.1-2009, ISO 6508-1.2005, MOD)
GB/T 1804 Tolerance tolerance for linear and angular dimensions of general tolerances (GB/T 1804-2000, ISO 2786-1.
1989, EQV)
GB/T 2828.1 Count Sampling Inspection Procedures Part 1. Batch Inspection Sampling Plans Retrieved by Acceptance Quality Limit (AQL)
(GB/T 2828.1-2012, ISO 2859-1.1999, IDT)
GB/T 4340.1 Vickers hardness test of metallic materials - Part 1. Test method (GB/T 4340.1-2009, ISO 6507-
1.2005,MOD)
GB/T 9253.2 Petroleum, natural gas industrial casing, tubing and line pipe thread processing, measurement and inspection
GB/T 9445 Qualification and certification of nondestructive testing personnel (GB/T 9445-2015, ISO 9712.2012)
GB/T 18449.1 Knoop hardness test of metallic materials - Part 1. Test method (GB/T 18449.1-2009,
ISO 4545-1.2005, MOD)
SY/T 5029 Sucker Rod
Recommended Practice for Maintenance and Use of SY/T 5188 Suction Pumps
3 Terms, definitions, symbols and abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this document.
|