|
US$274.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18577.2-2008: Earth-moving machinery -- Definitions of dimensions and codes -- Part 2: Equipment and attachments
Status: Valid GB/T 18577.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18577.2-2008 | English | 274 |
Add to Cart
|
3 days [Need to translate]
|
Earth-moving machinery -- Definitions of dimensions and codes -- Part 2: Equipment and attachments
| Valid |
GB/T 18577.2-2008
|
| GB/T 18577.2-2001 | English | 479 |
Add to Cart
|
3 days [Need to translate]
|
Earth-moving machinery -- Definitions of dimensions and symbols -- Part 2: Equipment
| Obsolete |
GB/T 18577.2-2001
|
PDF similar to GB/T 18577.2-2008
Basic data | Standard ID | GB/T 18577.2-2008 (GB/T18577.2-2008) | | Description (Translated English) | Earth-moving machinery -- Definitions of dimensions and codes -- Part 2: Equipment and attachments | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P97 | | Classification of International Standard | 53.100 | | Word Count Estimation | 14,144 | | Date of Issue | 2008-08-26 | | Date of Implementation | 2009-02-01 | | Older Standard (superseded by this standard) | GB/T 18577.2-2001 | | Quoted Standard | GB/T 8498; GB/T 18577.1 | | Adopted Standard | ISO 6746-2-2003, IDT | | Regulation (derived from) | National Standard Approval Announcement 2008 No.14 (Total No.127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the definition of dimensions and symbols of earth-moving machinery and work equipment subsidiary devices. And provides a coordinate system defined for size, terminology standards and commercial specifications in the corresponding dimension, coding system. This section applies to GB/T 8498 basic types of earth-moving machinery and work equipment defined in attachments. | GB/T 18577.2-2008: Earth-moving machinery -- Definitions of dimensions and codes -- Part 2: Equipment and attachments
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Earth-moving machinery Definitions of dimensions and codes Part 2. Equipment and attachments
ICS 53.100
P97
National Standards of People's Republic of China
GB/T 18577.2-2008/ISO 6746-2.2003
Replacing GB/T 18577.2-2001
Define the size of earth-moving machinery and symbols
Part 2. Equipment and fixtures
(ISO 6746-2.2003, IDT)
Posted 2008-08-26
2009-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 General 2
5 3 coding system
Appendix A (normative) height dimension 4
Appendix B (normative) width size 6
Annex C (normative) length size 8
Annex D (normative) radius dimension 9
Appendix E (normative) angle size 10
GB/T 18577.2-2008/ISO 6746-2.2003
Foreword
GB/T 18577 "moving machinery size and symbol definitions" is divided into two parts.
--- Part 1. Host;
--- Part 2. Equipment and fixtures.
This section GB/T 218 577 Part of this part identical with ISO 6746-2.2003 "moving machinery size and symbols
Definitions - Part 2. Equipment and fixtures "(in English).
This section is equivalent translation ISO 6746-2.2003.
For ease of use, this section made the following editorial changes.
--- "This International Standard" be replaced by "this section";
--- Deleted international standards foreword;
--- To ISO 6746-2.2003 international standard referenced with the international standard has been adopted as the standard instead of the corresponding country.
This Part replaces GB/T 18577.2-2001 "moving machinery - Definitions of dimensions and symbols Part 2. Equipment."
This section compared with the GB/T 18577.2-2001, the main changes are as follows.
--- Standard name from "earth-moving machinery - Definitions of dimensions and symbols Part 2. Equipment" to "earth-moving machinery and character size
Defined number - Part 2. Equipment and fixtures ";
--- Standard English name was modified accordingly;
--- Original 3.1 "three-dimensional coordinate system" and the contents of Appendix A merger is 3.1 "three-dimensional coordinate system", and the content of the standard will be
Modified accordingly;
--- Adjust and modify the contents of the appendix.
This section of the Appendix A, Appendix B, Appendix C, Appendix D and Appendix E are normative appendix.
This part is proposed by China Machinery Industry Federation.
This part of the National earthmoving machinery Standardization Technical Committee (SAC/TC334) centralized.
This section is drafted. Tianjin Construction Machinery Research Institute.
The main drafters of this section. Li Guangqing, Shanghai Bo.
This part of the standard replaces the previous editions are.
--- GB/T 18577.2-2001.
GB/T 18577.2-2008/ISO 6746-2.2003
Define the size of earth-moving machinery and symbols
Part 2. Equipment and fixtures
1 Scope
This section GB/T 18577 specifies the definition of the size of the symbol of earth-moving machinery and work equipment attachments and provides for the use
In size defined coordinate system, coding system terminology standards and commercial specifications in the corresponding size.
This section applies to GB/T 8498 basic types of earth-moving machinery and work equipment and fixtures defined.
2 Normative references
The following documents contain provisions which, through reference GB/T 18577 in this section, constitute provisions of this part. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 8498 Earth - moving machinery - Basic types - Identification and terms and definitions (GB/T 8498-2008, ISO 6165.2006, IDT)
Definition of GB/T 18577.1 moving machinery dimensions and codes - Part 1. Host (GB/T 18577.1-2008,
ISO 6746-1.2003, IDT)
3 Terms and Definitions
GB/T 8498 and established the following terms and definitions apply GB/T 18577 in this section.
3.1
Moving machinery used to define the size of the three-dimensional coordinate system (Figure 1).
3.1.1
Vertical plane through the longitudinal center line of the machine.
3.1.2
Any of a vertical plane perpendicular to the Y plane.
3.1.3
Either the horizontal plane X and Y plane orthogonal to the plane.
3.1.4
Above the front plane of the zero X, Y plane to the right of zero and zero Z plane are positive directions.
Note 1. The intersection of the X, Y, Z axis (zero plane) should be located on a well-defined reference point (seat index point; the engine crankshaft centerline; bulldozer driver
Rear axle or wheel center line; the whole measure of the horizon).
Note 2. If only represents a member (the engine, the seat), from the X, Y, Z-axis (zero plane) from the intersection of the axis relative to the orientation of the machine components should be in
Normal position (first cylinder of the engine facing the front of the machine; the seat facing forward) is determined as the positive direction.
Note 3. If you represent a machine or a work unit, you should indicate the machine is traveling from right to left orientation.
GB/T 18577.2-2008/ISO 6746-2.2003
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18577.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 18577.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 18577.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18577.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 18577.2-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18577.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|