|
US$414.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18039.3-2017: Electromagnetic compatibility -- Environment -- Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
Status: Valid GB/T 18039.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18039.3-2017 | English | 414 |
Add to Cart
|
3 days [Need to translate]
|
Electromagnetic compatibility -- Environment -- Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
| Valid |
GB/T 18039.3-2017
|
| GB/T 18039.3-2003 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Electromagnetic compatibility environment compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
| Obsolete |
GB/T 18039.3-2003
|
PDF similar to GB/T 18039.3-2017
Basic data | Standard ID | GB/T 18039.3-2017 (GB/T18039.3-2017) | | Description (Translated English) | Electromagnetic compatibility -- Environment -- Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L06 | | Classification of International Standard | 33.100.01 | | Word Count Estimation | 22,248 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Older Standard (superseded by this standard) | GB/T 18039.3-2003 | | Regulation (derived from) | National Standards Bulletin 2017 No. 32 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 18039.3-2017: Electromagnetic compatibility -- Environment -- Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electromagnetic compatibility - Environment - Compatibility levels for low-frequency conducted disturbances and signaling in public low-voltage power supply systems
ICS 33.100.01
L06
National Standards of People's Republic of China
Replacing GB/T 18039.3-2003
Electromagnetic compatibility environment
Common low-voltage power supply system for low-frequency conduction disturbance and
Signal transmission compatible level
[IEC 61000-2-2.2002, Electromagneticcompatibility (EMC) -
Part 2-2. Environment-Compatibilitylevelsforlowfrequencyconducted
disturbancesandsignalinginpubliclow-voltagepowersupplysystems, IDT]
2017-12-29 published.2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
3.1 General Definitions 2
3.2 Phenomenon-related definitions 3
4 compatible level 4
4.1 Overview 4
4.2 Voltage Fluctuation and Flashing 4
4.3 Harmonic 5
4.4 Interharmonics 6
4.5 Voltage dips and short interruptions 7
4.6 voltage imbalance 7
4.7 Transient over-voltage 7
4.8 Short-term power frequency changes 8
4.9 DC component 8
4.10 grid signal 8
Appendix A (informative) EMC compatibility level and the role of planning level 10
A.1 The necessity of compatibility 10
A.2 Compatibility Level and Immunity Level 10
A.3 Compatibility level and emission limits of the relationship 10
A.4 Planning Level 11
A.5 Illustration of compatibility, emission, immunity and planning 12
Appendix B (informative) Some discussion of harassment 13
B.1 Resolution of non-sinusoidal voltage and current 13
B.2 Interharmonic and voltage components above 50 frequencies 14
B.3 Voltage dips and short interruptions 17
B.4 Transient overvoltages 17
B.5 DC component 18
References 19
Foreword
The Electromagnetic Compatibility Environment currently includes the following sections.
--- GB /Z 18039.1 Electromagnetic compatibility environment Electromagnetic environment classification;
--- GB /Z 18039.2 Electromagnetic compatibility environment Industrial equipment power supply low frequency conducted disturbances emission level assessment;
--- GB/T 18039.3 electromagnetic compatibility environment common low-voltage power supply system low frequency conducted disturbances and signal transmission compatible level;
--- GB/T 18039.4 Electromagnetic compatibility environment Factory compatible level of low frequency conducted disturbance;
--- GB /Z 18039.5 electromagnetic compatibility environment common power supply system low frequency conducted disturbances and electromagnetic transmission signal environment;
--- GB /Z 18039.6 Electromagnetic compatibility environment A variety of environments in the low-frequency magnetic field;
--- GB /Z 18039.7 electromagnetic compatibility environment public power supply system voltage dips, short interruptions and their measurement statistics
result;
--- GB/T 18039.8 Electromagnetic compatibility environment High altitude nuclear electromagnetic pulse (HEMP) Environmental Description Conducted disturbance;
--- GB/T 18039.9 EMC common medium voltage power supply system low frequency conducted disturbances and signal transmission compatible level.
This section is the third part of the "electromagnetic compatibility environment."
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 18039.3-2003 "common low-voltage electromagnetic interference environment and low-frequency power supply system harassment and signal transmission
The level of compatibility. "
This section compared with GB/T 18039.3-2003 main technical changes are as follows.
--- Modify the frequency range of conducted disturbances, increasing the frequency range of the grid signal (see Chapter 1);
--- Increased high-frequency voltage distortion and transient over-voltage phenomenon (see Chapter 1 and 4.7);
--- Increasing the normative references and terms and definitions (see Chapter 2, Chapter 3);
--- Modify the calculation of total harmonic distortion harmonic frequency (see 3.2.7);
--- Increasing the calculation of the severity of flicker caused by voltage fluctuations (see 4.2);
--- Modify the low-voltage power grid harmonic voltage components of the level of compatibility (see 4.3);
--- Modify the level of inter-harmonics compatible with flicker (see 4.4);
--- Increased voltage imbalance compatibility levels that may occur when connecting large single-phase loads (see 4.6);
--- Modify the frequency range of the ripple control system, increase the Meters curve of the public power network control system (see 4.10.2);
--- Added informative appendices (see Appendix A and Appendix B).
This section uses the translation method identical with IEC 61000-2-2.2002 "Electromagnetic Compatibility Environment Part 2-2. Public low-voltage power supply system
System low-frequency conducted disturbances and signal transmission compatible level. "
The documents of our country that are consistent with the corresponding international documents that are normative references in this section are as follows.
--- GB/T 16935.1-2008 Insulation coordination of equipment in low-voltage systems - Part 1. Principles, requirements and tests
(IEC 60664-1.2007, IDT);
--- GB /Z 18039.5-2003 Electromagnetic compatibility Environment Common power supply system Low-frequency conducted disturbances and signal transmission electromagnetic ring
Habitat (IEC /T R61000-2-1.1990, IDT);
--- GB/T 17625.2-2007 Electromagnetic compatibility limit for each phase rated current ≤ 16A and unconditional access to the equipment in the public
Limitations on voltage variations, voltage fluctuations and flicker generated in low voltage supply systems (IEC 61000-3-3.2005, IDT);
--- GB/T 17626.7-2017 Electromagnetic compatibility test and measurement technology Power supply systems and connected devices Harmonic, inter-harmonic wave measurement
Guidance on measuring and measuring instruments (IEC 61000-4-7.2009, IDT);
--- GB/T 17626.15-2011 Electromagnetic compatibility test and measurement technology Scintillator function and design specifications (IEC 61000-
4-15.2003, IDT).
This section made the following editorial changes.
--- In line with the existing standard series, the name of this section was changed to "electromagnetic compatibility environment of public low-voltage power supply system low-frequency conduction
Interfere with the compatibility of signal transmission. "
This part of the National Electromagnetic Compatibility Standardization Technical Committee (SAC/TC246) and focal point.
This part of the drafting unit. China Electric Power Research Institute, Ministry of Industry and Information Technology Fifth Institute.
The main drafters of this section. Liu Xingfa, Wanbaoquan, Wu Xiong, Yin Ting, Zhang Jiangong, Lu Yao, Zhu Wenli, Zhang Ye Mao, Xie Hui Chun, Li Ni.
This part replaces the standards previously issued as.
--- GB/T 18039.3-2003.
Electromagnetic compatibility environment
Common low-voltage power supply system for low-frequency conduction disturbance and
Signal transmission compatible level
1 Scope
GB/T 18039 This section relates to the frequency range of 0kHz ~ 9kHz conducted disturbances and extended to 148.5kHz power grid
Signal transmission system. This section gives the nominal voltage up to 420V (single phase) or 690V (three phase), the nominal frequency of 50Hz AC
Common low-voltage power supply system compatibility level.
This part of the compatibility level for the public connection point. When the device's power input port absorbs power from the above system, most
In cases where the intensity of harassment is equal to the point of public connection but in some cases it is exceptional, for example specific devices that supply power over long distances, or
Interference generated or amplified within the device integrated by the device.
The purpose of this section is to give the level of compatibility of all types of electromagnetic disturbances that may appear in public low-voltage power supply systems to guide them.
a) Set limits for the electromagnetic disturbance to public power supply systems (including the level of planning as defined in 3.1.5);
b) The relevant product standardization technical committee stipulates the level of immunity of the equipment to conducted disturbances of the public power supply system.
The harassment considered in this section includes.
--- Voltage fluctuations and flashing;
--- 50 times and 50 times the following harmonics;
--- Interharmonic below 50 times;
--- High frequency (higher than 50 harmonics) voltage distortion;
--- Voltage sag and short interruption;
--- voltage imbalance
--- Transient over-voltage;
--- Power frequency changes;
---DC component;
--- Power grid signal.
Most harassment phenomena are described in IEC /T R61000-2-1. Provide some information when it is not possible to determine the level of compatibility.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
IEC 60050-101 International Electrotechnical Terminology (IEV) Part 101. Mathematics [Internationalelectrotechnical
vocabulary (IEV) -Part 101.Mathematics]
IEC 60050-161 International Electrotechnical Terminology (IEV) Part 161. Electromagnetic compatibility [International Electrotechnical Vo-
cabulary (IEV) -Part 161.Electromagneticcompatibility]
IEC 60664-1 low-voltage system equipment with insulation coordination Part 1. Principles, requirements and testing (Insulationcoordination
forequipmentwithinlow-voltagesystems-Part 1.Principles, requirementsandtests)
IEC /T R61000-2-1 Electromagnetic compatibility (EMC) Part 2-1. Environmental Common power supply systems Low frequency conducted disturbances and signaling
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18039.3-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 18039.3-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 18039.3-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18039.3-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 18039.3-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18039.3-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|