|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18024.7-2010: Graphical symbols for the technical documentation of coal mine machinery -- Part 7: Graphical symbols for compressor, fan and pump
Status: Valid GB/T 18024.7: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18024.7-2010 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Graphical symbols for the technical documentation of coal mine machinery -- Part 7: Graphical symbols for compressor, fan and pump
| Valid |
GB/T 18024.7-2010
|
| GB/T 18024.7-2000 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Graphical symbols for use in technical documentation of coal mine machinery-Graphical symbols for machinery of compressed-air, ventilation and water drainage
| Obsolete |
GB/T 18024.7-2000
|
PDF similar to GB/T 18024.7-2010
Basic data | Standard ID | GB/T 18024.7-2010 (GB/T18024.7-2010) | | Description (Translated English) | Graphical symbols for the technical documentation of coal mine machinery -- Part 7: Graphical symbols for compressor, fan and pump | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | D04 | | Classification of International Standard | 01.080.20 | | Word Count Estimation | 10,145 | | Date of Issue | 2010-09-26 | | Date of Implementation | 2011-02-01 | | Older Standard (superseded by this standard) | GB/T 18024.7-2000 | | Quoted Standard | GB/T 16901.1; GB/T 17450 | | Regulation (derived from) | National Standard Approval Announcement 2010 No.6 (Total No.161) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the compressor, fan and pump graphical symbols and rules. Suitable for mine design, production, research, teaching, Books and management of technical documents and to draw a variety of device configuration diagram, system diagram, schematic, also applies to other industries like machinery technical documentation. | GB/T 18024.7-2010: Graphical symbols for the technical documentation of coal mine machinery -- Part 7: Graphical symbols for compressor, fan and pump
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Graphical symbols for the technical documentation of coal mine machinery Part 7. Graphical symbols for compressor, fan and pump
ICS 01.080.20
D04
National Standards of People's Republic of China
Replacing GB/T 18024.7-2000
Coal mine machinery Graphical symbols for technical documentation
Part 7. compressor, fan and pump
Graphical symbols
Part 7. Graphicalsymbolsforcompressor, fanandpump
Issued on. 2010-09-26
2011-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 18024 "coal mine machinery Graphical symbols for technical documentation" is divided into seven parts.
--- Part 1. General;
--- Part 2. Support and pillar coal mining face graphic symbols;
--- Part 3. Graphical symbols for mining machinery;
--- Part 4. Graphical symbols for underground haulage machinery;
--- Part 5. ground production and hoisting machinery graphic symbols;
--- Part 6. Graphical symbols for surface mine machinery;
--- Part 7. compressor, fan and pump graphic symbols.
This section GB/T Part of 718,024.
This Part replaces GB/T 18024.7-2000 "technical documentation of coal mine machinery Graphical symbols for compressed air, ventilation and drainage machinery graphical symbols
number".
Section compared with the GB/T 18024.7-2000 The main changes are as follows.
--- Expanding the scope of the standard (see Chapter 1);
--- Modify the design of graphical symbols, design standard modulus M dot grid, the grid system of 0.125M (2000 edition
3.1; 3.4 edition);
--- An increase in the use of graphic symbols, its scale and more flexible content (see 3.4);
--- An increase of two graphic symbols. portable air compressors and portable gas drainage pump (see 7-02 and 7-20).
This part of GB/T 18024.1 ~ 18024.6 supporting the use.
This section is proposed and managed by the China Coal Industry Association.
This section is responsible for drafting the Xi'an University of Science.
The main drafters of this section. Malaysia Ji, Li Yong, rejuvenating autumn, Ma Jin.
This part of the standard replaces the previous editions are.
--- GB/T 18024.7-2000.
Coal mine machinery Graphical symbols for technical documentation
Part 7. compressor, fan and pump
Graphical symbols
1 Scope
GB/T 18024 in the provisions of this part of the compressor, fan and pump graphical symbols and rules.
This section applies to mine design, production, scientific research, teaching, publications and technical documentation and other aspects of management, to draw a variety of devices with
Maps, system maps, sketches and other. Also applicable to other similar machinery industry technical documents.
2 Normative references
The following documents contain provisions which, through reference GB/T 18024 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 16901.1 technical documents represent the first part of the rule of graphical symbols. Basic rules (GB/T 16901.1-2008,
ISO 81714-1.1999, MOD)
GB/T 17450 Technical drawings Chart (GB/T 17450-1998, idt ISO 128-20.1996)
3 Rules for use symbols
3.1 graphical symbols, applications GB/T 17450 stipulated line drawing.
3.2 arrows indicating the flow direction, a thin solid line drawn in the head angle should be between 45 ° ~ 60 °.
3.3 Part predetermined direction graphic symbols as needed can be rotated a certain angle or into a mirrored configuration.
Graphical symbols specified in section 3.4 is based on GB/T 16901.1 requirements, design 0.125M lattice grid system for regulation
The proportion of fixed symbols, graphic symbols can be different in different directions in the same proportion or ratio of the need to make appropriate adjustments according to use, but it should be fully
Original graphical symbols transmitted information.
General symbol specified in Section 3.5, for use in the expression of specific types of objects without specified occasions.
4 compressor, fan and pump graphic symbols
Compressor, fan and pump graphical symbols shown in Table 1.
Table 1 compressor, fan and pump graphic symbols
No Graphic Symbol Name Description
7-01
Air Compressor
compressor
General symbol
References GB/T 16660-2008
(4.4.9)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18024.7-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 18024.7-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 18024.7-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18024.7-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 18024.7-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18024.7-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|