|
US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17393-2008: Specification for thermal insulation for use in contact with austenitic stainless steel
Status: Valid GB/T 17393: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17393-2008 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Specification for thermal insulation for use in contact with austenitic stainless steel
| Valid |
GB/T 17393-2008
|
| GB/T 17393-1998 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Standard specification of thermal insulation materials for use over austenitic stainless steel
| Obsolete |
GB/T 17393-1998
|
PDF similar to GB/T 17393-2008
Basic data | Standard ID | GB/T 17393-2008 (GB/T17393-2008) | | Description (Translated English) | Specification for thermal insulation for use in contact with austenitic stainless steel | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q25 | | Classification of International Standard | 91.120.10 | | Word Count Estimation | 11,154 | | Date of Issue | 2008-06-30 | | Date of Implementation | 2009-04-01 | | Older Standard (superseded by this standard) | GB/T 17393-1998 | | Quoted Standard | GB/T 228; GB/T 4132; GB/T 15970.3; GB/T 20878; JC/T 618-2005 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.11 (Total No.124) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the austenitic stainless steel covered with insulation material terms and definitions, test methods, , General requirements, requires inspection rules and packaging, signs, transportation and storage. This standard applies to the fibrous insulation materials, including aluminum silicate cotton, wool, slag wool, glass wool and its products, but also for other insulation materials such as calcium silicate, composite silicate, bubble asbestos, foam, foam rubber and so on. | GB/T 17393-2008: Specification for thermal insulation for use in contact with austenitic stainless steel
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for thermal insulation for use in contact with austenitic stainless steel
ICS 91.120.10
Q25
National Standards of People's Republic of China
Replacing GB/T 17393-1998
Austenitic stainless steel covered with a heat insulating material specification
Posted 2008-06-30
2009-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard reference ASTMC795-2003 "austenitic stainless steel covered with a heat insulating material norms" and ASTMC692-2006
"Test Method for Evaluation insulation cracking of austenitic stainless steel external stress corrosion."
This standard replaces GB/T 17393-1998 "austenitic stainless steel covered with a heat insulating material specification."
This standard compared with the original standard, the main technical changes as follows.
--- Added "Standard Test Method for insulation material for stress corrosion cracking of austenitic stainless steel external impact assessment", as Appendix A;
--- Increasing the "insulation flooding measurement of pH," as Appendix B.
Please note that some of the content of this standard may involve patents, the issuing authority of this standard should not bear the responsibility to identify these patents.
The Standard Appendix A and Appendix B are normative appendix.
The standard proposed by China Building Materials Federation.
This standard by the National Standardization Technical Committee heat insulating material (SAC/TC191) centralized.
This standard is drafted by. Nanjing Fiberglass Research and Design Institute.
Participated in the drafting of this standard. Owens Corning (China) Investment Co., Ltd., Deqing County, Zhejiang Pu Sen Refractories Co., Ltd., West
Newcastle (Guangzhou) Co., Ltd. Building Materials.
The main drafters of this standard. Shad Ren, Yang Chunying, Gedui Shi, Wang Zhi.
This standard superseded standard previously issued as follows.
--- GB/T 17393-1998.
Austenitic stainless steel covered with a heat insulating material specification
1 Scope
This standard specifies the austenitic stainless steel covered with insulating material (hereinafter referred to as heat insulating material) terms and definitions, general requirements, requirements,
Test methods, inspection rules, and packaging, labeling, transport and storage.
This standard applies to fibrous insulation materials, including aluminum silicate wool, rock wool, slag wool, glass wool and its products, it must also apply to other
Thermal materials, such as calcium silicate, complex silicates, asbestos foam, foam, foam rubber and plastics.
This standard is not intended to make use of this standard with all the related security issues. Standard responsibility of the user prior to use to establish appropriate
Safety and health practices and determine the possible use of the relevant Regulations.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 228 metal materials at room temperature tensile test method
GB/T 4132 insulation materials and related terms
GB/T 15970.3 Stress corrosion testing of metals and alloys - Part 3. Preparation and use of U-bend specimens
GB/T 20878 stainless steel and heat-resistant steel grades and chemical composition
JC/T 618-2005 insulating material can be dissolved chlorides, fluorides, chemical analysis of silicate and sodium ions
3 Terms and Definitions
GB/T 4132 and established the following terms and definitions apply to this standard.
Damage in the form of metal crack may occur in some combined effects of the corrosive environment and the stress or residual stress.
4 General requirements
Exterior insulation material, size, and physical and chemical properties shall comply with the relevant product standards.
5 Requirements
5.1 corrosive
Insulation materials should by stress corrosion test. Products in the production and should be completed by stress corrosion test, after mass production
Insulation materials and pre-production should have the same formulation, using the same species, the nature and quality of raw materials in the same production process.
NOTE. stress corrosion test is a pre-production test.
5.2.1 insulation material can be dissolved chloride, fluoride, silicate and sodium content should be in accordance with Table 1, receive and reject range
As shown in Figure 1.
5.2.2 pH of insulating material leaching solution should be at 25 ℃ as 7.0 to 11.7.
6 Test methods
6.1 corrosion test in accordance with Appendix A requirements.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17393-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 17393-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17393-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17393-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17393-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17393-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|