|
US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17357-2008: In-situ measurements of heat loss through thermal insulation of equipment and pipes -- Heat flow meter apparatus and surface temperature method
Status: Valid GB/T 17357: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17357-2008 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
In-situ measurements of heat loss through thermal insulation of equipment and pipes -- Heat flow meter apparatus and surface temperature method
| Valid |
GB/T 17357-2008
|
| GB/T 17357-1998 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
In-situ measurements of heat loss in thermal insulation of equipments and pipes--Heat flow meter apparatus
| Obsolete |
GB/T 17357-1998
|
PDF similar to GB/T 17357-2008
Basic data | Standard ID | GB/T 17357-2008 (GB/T17357-2008) | | Description (Translated English) | In-situ measurements of heat loss through thermal insulation of equipment and pipes -- Heat flow meter apparatus and surface temperature method | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | F04 | | Classification of International Standard | 027.010 | | Word Count Estimation | 13,125 | | Date of Issue | 2008-06-19 | | Date of Implementation | 2009-01-01 | | Older Standard (superseded by this standard) | GB/T 17357-1998; GB/T 18021-2000 | | Quoted Standard | GB/T 4132; GB/T 874-2008; GB/T 10295 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 10 of 2008 (total 123) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the method using heat flow meter method and the surface temperature field measurement equipment and pipeline insulation layer surface heat loss of terms and definitions, measurement instruments, sensor installation, measuring segment selection, on-site measurement conditions, heat flow meter method for the determination step, the surface Determination of temperature steps and results calculation, data processing and heat flux density to determine the heat-insulating layer surface heat (cold) loss methods and requirements, including measuring instruments, measuring point selection, operation and data processing. This standard applies to the normal conditions of the site evaluation equipment and pipe insulation insulation properties. | GB/T 17357-2008: In-situ measurements of heat loss through thermal insulation of equipment and pipes -- Heat flow meter apparatus and surface temperature method
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
In-situ measurements of heat loss through thermal insulation of equipments and pipes. Heat flow meter apparatus and surface temperature method
ICS 027.010
F04
National Standards of People's Republic of China
Replacing GB/T 17357-1998, GB/T 18021-2000
Equipment and pipeline insulation layer surface situ measurements of heat loss
Heat flow meter method and the surface temperature method
Posted 2008-06-19
2009-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard "Heat flow meter equipment and pipeline insulation layer surface heat loss field," according to GB/T 17357-1998 and
Content GB/T 18021-2000 "equipment and piping insulation situ measurements of heat loss in the surface temperature of the Law" integration amendments made.
This standard also replace the GB/T 17357-1998 and GB/T 18021-2000.
This standard and GB /and GB/T 18021-2000, compared T 17357-1998 main changes are as follows.
--- Standard name changed to "equipment and piping insulation surface heat loss Heat flow meter field and surface temperatures Law";
--- Table 1 were modified according to GB/T 8174 Table 1, is consistent;
--- The measurement error to measurement uncertainty;
--- According to GB/T 1.1 the requirements of the standard format has been modified.
Appendix A of this standard is a normative appendix.
This standard by the National Standardization Technical Committee for Energy and management proposed.
This standard by the National Standardization Technical Committee Sub-Committee on Technical Application of Provincial Energy and Materials Management.
This standard is drafted by. building materials industry and technical supervision research center, the China Disease Prevention and Control Center environment and health related products
Product safety.
Participated in the drafting of this standard. Wuxi City, Jiangsu Insulation Materials Co., China's water supplies electricity company in Tianjin, Yixing City, Bao Jian
Temperature Materials Co., Ltd., Beijing North Source United States Engineering Technology Co., Armacell insulation (Guangzhou) Co., Ltd., Zhejiang Jiang Zhenshen science and technology have insulation
Ltd., Lanzhou Pengfei insulation Ltd., Owens Corning (China) Investment Co., Ltd.
The main drafters of this standard. Wear self-Zhu, Gan Yongxiang, Jinfu Jin, Wu Shouyong, Chen Bin, single Nagae, Zhang Xiangchang.
This standard replaces the standards previously issued as follows.
--- GB/T 17357-1998;
--- GB/T 18021-2000.
Equipment and pipeline insulation layer surface situ measurements of heat loss
Heat flow meter method and the surface temperature method
1 Scope
This standard specifies the method using heat flow meter method and the surface temperature field measurement equipment and pipeline insulation layer surface heat loss terms and definitions,
Install measuring instruments, sensors, measuring step selected measurement segment, on-site measurement conditions, heat flow meter method, the measuring step and the junction surface temperature method
If computing, data processing and heat flux to determine the thermal insulation of hot (cold) loss methods and requirements, including measuring instruments, measuring point selection, operation
And for data processing.
This standard applies to on-site evaluation of insulating properties under normal conditions of equipment and pipeline insulation layer.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 4132 insulation materials and related terms
Testing and evaluation GB/T 8174-2008 equipment and pipeline insulation effect
GB/T 10295 insulation steady thermal resistance and related properties - Heat flow meter method
3 Terms and Definitions
GB/T 4132 and established in the following terms and definitions apply to this standard.
3.1
By a heat flux sensor (or heat flow probe) connected measuring instruments consisting of thermal instrumentation. When using sensors embedded in its insulating
Sticking within the structure or the outer surface of the insulating structure can be directly measured heat (cold) loss values.
3.2
The use of a temperature difference on the plate with a determined resistance to measure the heat flux through its own means. Its output potential (Vp) and
By heat flux sensor (q) is proportional.
It is composed of the core plate, the temperature difference between the surface of the detector and the protective effect of damping and thermal panels and other components. Point can be made (such as round, square
Shaped, rectangular or other shape) or the strip heat flux sensor.
3.3
In two successive cycles of 5min heat flux sensor output potential is not monotonic, and the average difference of no more than 2%.
3.4
In other types of thermocouples or temperature sensors as the sensing element for measuring the surface temperature Thermometer. Such as thermocouples Surface
Thermometers, resistive surface thermometer.
4 measuring instrument
4.1 according to the provisions of GB/T 8174, the determination of equipment and piping insulation (cold) effect divided into three levels. Based on the measurement level requirements, to be elected
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17357-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 17357-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17357-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17357-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17357-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17357-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|