|
US$559.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16934-2013: Electric energy metering cubicle
Status: Valid GB/T 16934: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 16934-2013 | English | 559 |
Add to Cart
|
5 days [Need to translate]
|
Electric energy metering cubicle
| Valid |
GB/T 16934-2013
|
| GB/T 16934-1997 | English | 799 |
Add to Cart
|
5 days [Need to translate]
|
Electric energy metering cubicle
| Obsolete |
GB/T 16934-1997
|
PDF similar to GB/T 16934-2013
Basic data | Standard ID | GB/T 16934-2013 (GB/T16934-2013) | | Description (Translated English) | Electric energy metering cubicle | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P63 | | Classification of International Standard | 91.140.50 | | Word Count Estimation | 24,259 | | Older Standard (superseded by this standard) | GB/T 16934-1997 | | Quoted Standard | GB/T 191; GB 1207; GB 1208; GB 3906; GB 4208; GB/T 4703; GB 7251.1; GB 7251.2; GB 7251.3; GB 7251.4; GB 7251.5; GB 17201; GB/T 17215.301; GB/T 17215.321; GB/T 17215.322; GB/T 17215.323; GB/T 50063; DL/T 448; DL/T 593; JB/T 3085; JB/T 5777.2; JJG 1021; JJG | | Regulation (derived from) | National Standards Bulletin No. 21 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: The most energy meter cabinet technical and structural requirements, pilot projects and test methods. This standard applies to: AC 50Hz, rated voltage 0. 38W ~ 35kV, rated current 20A ~ 1000A and powered equipment used in conjunct | GB/T 16934-2013: Electric energy metering cubicle---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electric energy metering cubicle
ICS 91.140.50
P63
National Standards of People's Republic of China
Replacing GB/T 16934-1997
Energy metering cabinet
Issued on. 2013-10-10
2014-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
Model 3 4
5 Technical requirements 4
6 Structural requirements 10
14 7 Test Category
8 16 Test Method
9 mark 19
10 Package Files 20
11 Transport and storage 20
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 16934-1997 "energy metering cabinet."
This standard compared with GB/T 16934-1997, the main changes are as follows.
--- According to the provisions of GB/T 1.1-2009, the standard language and presentation formats have been modified;
--- High-voltage and low voltage scope split energy metering cabinet, by the "0.38 ~ 220kV" to "0.38kV ~ 750kV";
--- Increase the "energy information collection terminals" terms and definitions, remove the "metering current transformer" "metering voltage transformer" "Special
Meter, "" loss of pressure timer "" applies to Ⅰ (Ⅱ, Ⅲ, Ⅳ) category of users of electricity metering cabinet "and other terms;
--- Clear models of representation and meaning;
--- The technical requirements, structural requirements and test methods for separate representation;
--- GB 3906 based on relative humidity and DL/T 593, the conditions of use in removing the "40 ℃ when, should not exceed 50 percent" requirement,
Altitude will be "no more than 2000m" to "not more than 1000m";
--- Based JJG1021, a predetermined voltage transformer, current transformer load limit, replace select rated load;
--- Temperature limits, increasing the use of site altitude variation correction value;
--- Integral energy metering transformers and metering cabinet cabinet is rated voltage 20kV voltage level and increase the corresponding requirements;
--- Remove the current transformer rated current 160A, 315A and 630A, 10kV, 20kV grade rated a current transformer
Secondary current increases 10A, 35kV class CT rated primary current increases 600A, 750A, 800A, and
1000A, and this corresponds to an increase of other requirements;
--- Transformer error increases interaction requirements;
--- The applicable voltage levels, structural requirements contain general requirements, the overall energy metering cabinet and remote energy metering cabinet. Integral electric
Cabinets can be measured and 6kV ~ 35kV power metering box to increase the reserve power information collection terminal position requirements;
--- Increasing the formulas synthetic error limits, a comprehensive revision of the error limits prescribed value, increasing the Comprehensive Assessment Test square error
Method and formulas;
--- Revised classification test, refine pilot project.
This standard is proposed and managed by the China Electricity Council.
This standard was drafted. North China Electric Power Research Institute Co., Ltd., State Grid Electric Power Research Institute, West An Hongtai transformer manufacturing
Ltd., Anhui Chaohu power company, power company Huai'an in Jiangsu, Shaanxi Weinan Power Supply Company, Beijing Yupont Electric Power Technology Co., lake
North Wuhan power company.
The main drafters of this standard. Ding Hengchun, Wang Xiaoqi, Du Xingang, Liuan Yan, Zhouming Tao, Gao Zhen Long, Bai Yufeng, into the whole, Liu ceremony.
This standard replaces the standards previously issued as follows.
--- GB/T 16934-1997.
Energy metering cabinet
1 Scope
This standard specifies the technical and structural requirements for energy metering cabinet, pilot projects and test methods.
This standard applies to AC 50Hz, rated voltage 0.38kV ~ 35kV, rated current of 20A ~ 1000A and power supply equipment with so
High and low voltage integral energy metering cabinet and 0.38kV ~ 750kV high with the metal structure of the same type, low-voltage electricity meter split
The amount of the cabinet.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 1207 Electromagnetic Voltage Transformer
GB 1208 current transformer
GB 3906 3.6kV ~ 40.5kV AC metal-enclosed switchgear and control equipment
GB 4208 housing protection (IP Code)
GB/T 4703 Capacitor Voltage Transformer
GB 7251 (all parts), Low-voltage switchgear and control equipment
GB 17201 Combined Transformer
GB/T 17215.301-Meter special requirements
GB/T 17215.321 AC measuring equipment - Specific requirements - Part 21. Static meters for active energy (level 1 and level 2)
GB/T 17215.322 AC measuring equipment - Specific requirements Part 22. Static meters for active energy (0.2S and 0.5S grade level)
GB/T 17215.323 AC measuring equipment - Specific requirements - Part 23. Static reactive energy (classes 2 and 3)
GB/T 50063 electrical measuring instrumentation of electrical installation design specifications
Technical Management Rules of DL/T 448 Energy Metering Device
Common technical requirements for DL \u200b\u200b/ T 593 high-voltage switchgear and control equipment standards
JB/T 3085 power transmission control device packaging and shipping procedures
JB/T 5777.2 secondary power system circuit general technical conditions and relay control panel (cabinet, Taiwan)
JJG596 electronic energy meter testing procedures
JJG1021 power transformer test procedures
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Electricity meters electricenergymeteringdevice
All electrical power metering equipment, a combination of electrical and mechanical components of the generic structure.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16934-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 16934-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 16934-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16934-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 16934-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16934-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|