GB/T 16754-2021 PDF in English
GB/T 16754-2021 (GB/T16754-2021, GBT 16754-2021, GBT16754-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 16754-2021 | English | 205 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Safety of machinery - Emergency stop function - Principles for design
| Valid |
| GB 16754-2008 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
[GB/T 16754-2008] Safety of machinery. Emergency stop. Principles for design
| Obsolete |
| GB 16754-1997 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Safety of machinery--Emergency stop--Principles for design
| Obsolete |
Standards related to (historical): GB/T 16754-2021
PDF Preview
GB/T 16754-2021: PDF in English (GBT 16754-2021) GB/T 16754-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.110
CCS J 09
GB/T 16754-2021 / ISO 13850:2015
Replacing GB/T 16754-2008
Safety of machinery - Emergency stop function -
Principles for design
(ISO 13850:2015, IDT)
ISSUED ON: MAY 21, 2021
IMPLEMENTED ON: DECEMBER 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3
Introduction ... 6
1 Scope ... 8
2 Normative references ... 8
3 Terms and definitions ... 9
4 Safety requirements ... 11
4.1 General requirements ... 11
4.2 Operating conditions, environmental influences ... 16
4.3 Emergency stop device ... 16
4.4 Use of wires or ropes as actuators ... 19
4.5 Prevention of unintended actuation of an emergency stop device ... 20
4.6 Portable operator control stations ... 20
Bibliography ... 22
Foreword
This document is drafted in accordance with GB/T 1.1-2020 "Directives for
standardization - Part 1: Rules for the structure and drafting of standardizing
documents".
This document replaces GB/T 16754-2008 "Safety of machinery - Emergency
stop - Principles for design". Compared with GB/T 16754-2008, in addition to
structural adjustments and editorial changes, the main technical changes are
as follows:
- Add the terms "emergency stop equipment", "span of control of emergency
stop device(s)", "protective shroud", "emergency situation" and "operator
control station" and their definitions (see 3.2, 3.6, 3.7, 3.8 and 3.9);
- Clarify and refine the safety requirements of the emergency stop function;
add the requirements for the span of control of emergency stop device (see
4.1; 4.1 of the 2008 edition);
- Modify the safety requirements of emergency stop device (see 4.3; 4.4 of
the 2008 edition);
- Add requirements for prevention of unintended actuation of an emergency
stop device (see 4.5);
- Add requirements for portable operator control stations (see 4.6).
This document, using translation method, is identical to ISO 13850:2015
"Safety of machinery - Emergency stop function - Principles for design".
China’s documents which have a consistent correspondence with the
international documents normatively referenced in this document are as follows:
- GB/T 3766-2015 Hydraulic fluid power - General rules and safety
requirements for systems and their components (ISO 4413:2010, MOD);
- GB/T 5226.1-2019 Electrical safety of machinery - Electrical equipment of
machines - Part 1: General requirements (IEC 60204-1:2016, IDT);
- GB/T 7932-2017 Pneumatic fluid power - General rules and safety
requirements for systems and their components (ISO 4414:2010, IDT);
- GB/T 14048.14-2019 Low-voltage switchgear and controlgear - Part 5-5:
Control circuit devices and switching elements - Electrical emergency stop
device with mechanical latching function (IEC 60947-5-5:2016, IDT);
- GB/T 16855.1-2018 Safety of machinery - Safety-related parts of control
systems - Part 1: General principles for design (ISO 13849-1:2015, IDT);
- GB 28526-2012 Electrical safety of machinery - Functional safety of safety-
related electrical, electronic and programmable electronic control systems
(IEC 62061:2005, IDT).
Attention is drawn to the possibility that some of the elements of this document
may be the subject of patent rights. The issuing authority of this document shall
not be held responsible for identifying any or all such patent rights.
This document was proposed by and shall be under the jurisdiction of National
Technical Committee 208 on Safety of Machinery of Standardization
Administration of China (SAC/TC 208).
Drafting organizations of this document: Pilz Electronics (Changzhou) Co., Ltd.,
Shanghai Chenzhu Instrument Co., Ltd., Anhui Tianxu Technology Co., Ltd.,
Fujian Minxuan Technology Co., Ltd., Xiamen LiDi Plastic Co., Ltd., Jiusi
Testing Technology (Guangdong) Co., Ltd., Zhangzhou Kehui Special Purpose
Vehicle Manufacturing Co., Ltd., Fujian Bakingdom Food Co., Ltd., Sichuan
Shuxing Youchuang Safety Technology Co., Ltd., Guangdong Limai Testing
Technology Co., Ltd., Nanjing Forestry University, Foshan Shunde Wanyi
Household Products Co., Ltd., Nanjing University of Science & Technology,
China Productivity Center for Machinery, Schmersal Industrial Switch
Manufacturing (Shanghai) Co., Ltd., Zhejiang Aopeng Industry and Trading Co.,
Ltd., Suzhou Angao Intelligent Security Technology Co., Ltd., Nan'an Zhongji
Standardization Research Institute Co., Ltd., Idec Electric Trading (Shanghai)
Co., Ltd., Shenzhen DS Visual Technology Co., Ltd., Xi'an Libeian Intelligent
Technology Co., Ltd., Quanzhou Association for Standardization, Guangdong
Chengxin Technology Co., Ltd., China Academy of Machinery Science and
Technology Group Co., Ltd., Zhejiang Dingye Machinery Co., Ltd., Shaanxi
Shuoen Big Data Technology Co., Ltd., Shenzhen Everwin Precision
Technology Co, Ltd., Chuzhou University, Yiwu Jinglong Mould Co., Ltd.,
Guangdong Mingkai Technology Co., Ltd., China Certification Centre For
Automotive Products Co., Ltd., Shanghai Hanbell Precise Machinery Co., Ltd.,
Dongguan Association of Standards and Industry.
Main drafters of this document: Fu Xiang, He Chunyan, Zhang Song, Ye
Guohua, Ju Likai, Huang Zhijiong, Zhou Ting, Qin Peijun, Zhang Dejun, Wu
Xiangliang, Wu Jianwei, Li Qin, Zhu Bin, Luo Weiqiang, Xue Congfu, Yang
Changhai, Huang Qiongfang, Song Xiaoning, Jiang Tao, Yang Yi , Ju Ronghua,
Wang Feng, Cao Zhiyong, Nie Yongjiang, He Jun, Quan Ningwu, Chen Miaoren,
Wang Lei, Dong Kaibo, Li Zhong, Liu Zhiyong, Wang Pei, Li Liyan, Zheng
Huating, Shen Dehong, Cheng Hongbing, Yu Jianghua, Chen Zhuoxian, Yuan
Jun, Huo Zhifeng , Fu Huiqing, Zuo Xiaofei, Ni Liaoyong, Huang Jianwei, Ye
Guanlin, Nan Shaowei, Liu Qi, Li Taicong, Gong Lihua, Zhang Xiaofei.
Safety of machinery - Emergency stop function -
Principles for design
1 Scope
This document specifies functional requirements and design principles for the
emergency stop function on machinery, independent of the type of energy used.
This document apply to all machines, with exception to:
- machines where an emergency stop would not reduce the risk;
- hand-held or hand-operated machines.
This document does not deal with functions such as reversal or limitation of
motion, deflection of emissions (e.g. radiation, fluids), shielding, braking or
disconnecting, which can be part of the emergency stop function.
Note: The requirements for the realization of the emergency stop function based on
electrical/electronic technology are described in IEC 60204-1.
2 Normative references
The contents of the following documents, through normative references in this
text, constitute indispensable provisions of this document. Among them, for
dated references, only the edition corresponding to that date applies to this
document. For undated references, the latest edition (including all amendments)
applies to this document.
GB/T 15706-2012 Safety of machinery - General principles for design - Risk
assessment and risk reduction (ISO 12100:2010, IDT)
ISO 4413 Hydraulic fluid power - General rules and safety requirements for
systems and their components
ISO 4414 Pneumatic fluid power - General rules and safety requirements for
systems and their components
ISO 13849-1 Safety of machinery - Safety-related parts of control systems -
Part 1: General principles for design
IEC 60204-1:2005 Safety of machinery - Electrical equipment of machines -
Part 1: General requirements
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|