|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15234-2025: Plastic flat pallet
Status: Valid GB/T 15234: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15234-2025 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Plastic flat pallet
| Valid |
GB/T 15234-2025
|
| GB/T 15234-1994 | English | 140 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Plastics flat pallets
| |
GB/T 15234-1994
|
Basic data | Standard ID | GB/T 15234-2025 (GB/T15234-2025) | | Description (Translated English) | Plastic flat pallet | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A85 | | Classification of International Standard | 55.180.20 | | Word Count Estimation | 14,192 | | Date of Issue | 2025-08-01 | | Date of Implementation | 2026-02-01 | | Older Standard (superseded by this standard) | GB/T 15234-1994 | | Issuing agency(ies) | State Administration for Market Regulation, Standardization Administration of China | GB/T 15234-2025: Plastic flat pallet---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT15234-2025
ICS 55.180.20
CCSA85
National Standard of the People's Republic of China
Replaces GB/T 15234-1994
Plastic flat pallet
Plastic flatpalet
Released on August 1, 2025
Implementation on February 1, 2026
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Categories 2
5 Requirements 3
6 Test Method 4
7 Inspection Rules 6
8 Marking, packaging, transportation and storage 8
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document replaces GB/T 15234-1994 "Plastic flat pallets". Compared with GB/T 15234-1994, except for structural adjustments and editorial
In addition to the modifications, the main technical changes are as follows.
--- Changed the scope of application (see Chapter 1, Chapter 1 of the.1994 edition);
--- Added "Plastic Flat Pallet", "Injection Molded Plastic Flat Pallet", "Blow Molded Plastic Flat Pallet", "Welded Plastic Flat Pallet", "Group
The term and definition of "plastic flat pallet" (see 3.1, 3.2, 3.3, 3.4, 3.5);
--- Added classification by production molding process, component combination, rated load, number of decks, fork entry, single-sided and double-sided use
(See 4.1, 4.2, 4.3, 4.4);
--- Changed the classification diagram (see Table 1, Table 1 of the.1994 edition), added classification codes, common molding processes and main uses (see
Table 1);
--- Deleted the performance (see 5.1 of the.1994 edition), and added the material requirements (see 5.1);
--- Changed the appearance requirements (see 5.2, 5.3 of the.1994 edition);
--- Increased tolerance requirements (see 5.3.2);
--- Deleted the performance requirements of stacking test, bending strength test, lower deck strength test and uniform load strength test (see the.1994 edition
Table 2), changed the performance requirements of the corner drop test (see Table 2, Table 2 of the.1994 edition), added the bending stiffness test, fork lifting stiffness test
Stiffness test, pad or longitudinal beam stiffness test, deck stiffness test, bottom deck stiffness test, impact resistance test, static friction coefficient test
and the performance requirements of the sliding angle test (see Table 2);
--- Changed the content of the test conditions (see 6.1,.1994 edition 6.1), deleted the requirements for the test device (see.1994 edition
6.2);
--- Added the content of test selection, as well as the test methods for materials, appearance, dimensions and tolerances (see 6.2, 6.3, 6.4, 6.5);
--- Deleted the test methods of stacking test, bending strength test, lower deck strength test and uniform load strength test (see the.1994 edition
6.3, 6.4, 6.5, 6.7), changed the content of the corner drop test method (see 6.6.6,.1994 edition 6.6), added the bending stiffness
Test, fork lifting stiffness test, pad or longitudinal beam stiffness test, deck stiffness test, bottom deck stiffness test, impact resistance test,
Test methods for static friction coefficient test and sliding angle test (see 6.6.1, 6.6.2, 6.6.3, 6.6.4, 6.6.5, 6.6.7, 6.6.8,
6.6.9);
--- Increased the requirements for inspection sequence and inspection items (see 7.2, 7.3);
--- Changed the sampling requirements (see 7.5.2, 7.3 of the.1994 edition);
--- Changed the type inspection requirements (see 7.4, 7.1 of the.1994 edition);
--- Changed the factory inspection requirements in the judgment rules (see 7.6.1, 7.4 of the.1994 edition);
--- Deleted the certificate requirements (see 8.2 of the.1994 edition) and added packaging requirements (see 8.2).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed by the China Federation of Logistics and Purchasing.
This document is under the jurisdiction of the National Technical Committee for Logistics Standardization (SAC/TC269).
This document was drafted by. Shandong Tengbo Plastic Technology Co., Ltd., Shanghai Peret Plastics Co., Ltd., Shanghai Relacart Plastic Pallet Manufacturing
Co., Ltd., Hubei Jizheng New Material Technology Co., Ltd., Zhongrui Testing Technology (Suzhou) Co., Ltd., China Federation of Logistics and Purchasing, China Packaging
Packaging Research Institute Co., Ltd., State Grid Zhejiang Electric Power Co., Ltd. Material Branch, Zhejiang Jiuding Zhilian Technology Co., Ltd., Guizhou Hexin Plastic
Materials Manufacturing Co., Ltd., Standard Metrology Institute of China Academy of Railway Sciences Group Co., Ltd.
The main drafters of this document are. Liu Hao, Gao Zonglei, Wu Yanhua, Zhang Jiming, Hu Wenlong, Hu Shihuan, Zhang Zhenyuan, Feng Kecheng, Xue Chongshuo, Li Yang,
Zhang Zhengjun, Wang Li, Wang Kai, Xu Liangbao, Zhao Yi, Sun Xijun, Zhang Jinshu, Wang Rui, and Tian Baoshuan.
The previous versions of this document and the documents it replaces are as follows.
---First published in.1994 as GB/T 15234-1994;
---This is the first revision.
Plastic flat pallet
1 Scope
This document specifies the classification, requirements, inspection rules, marking, packaging, transportation and storage of plastic flat pallets, and describes the test
Test method.
This document applies to the design, production, testing, use and management of plastic flat pallets manufactured using injection molding and blow molding processes.
For reference use, the plastic flat pallet is used.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 2828.1 Sampling procedures for inspection by attributes Part 1.Sampling plans for batch inspection based on acceptance quality limit (AQL)
GB/T 2934 Main dimensions and tolerances of intermodal general-purpose flat pallets
GB/T 3716 Pallet Terminology
GB/T 4995-2025 Performance requirements and test selection for flat pallets
GB/T 4996-2025 Flat pallet test method
GB/T 40006.1-2021 Plastics Recycled Plastics Part 1.General
3 Terms and Definitions
The terms and definitions defined in GB/T 3716, GB/T 4995-2025, GB/T 4996-2025 and the following terms and definitions apply to this document.
3.1
plastic flat pallet plastic flat pallet
A pallet made of plastic with a top deck but no superstructure.
3.2
Plastic flat pallets are manufactured through injection molding using an injection molding machine and molds.
3.3
Plastic flat pallets are manufactured through the inflation molding process using a blow molding machine and mold.
3.4
A plastic flat pallet is a pallet made by welding two or more separately formed structural parts into one.
3.5
A plastic flat pallet is a pallet that is formed by assembling two or more separately formed structural parts into one body to realize the function of a pallet.
|