HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 15157.2-2015 English PDF

US$1654.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15157.2-2015: Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm with common mounting features
Status: Valid

GB/T 15157.2: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 15157.2-2015English1654 Add to Cart 8 days [Need to translate] Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm with common mounting features Valid GB/T 15157.2-2015
GB/T 15157.2-1998EnglishRFQ ASK 7 days [Need to translate] Connectors for frequencies below 3MHz for use with printed boards. Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54mm(0.1in) with commonmounting features Obsolete GB/T 15157.2-1998

PDF similar to GB/T 15157.2-2015


Standard similar to GB/T 15157.2-2015

GB/T 17737.100   GB/T 21711.1   GB/T 18501.8101   GB/T 18501.8100   GB/T 15157.12   

Basic data

Standard ID GB/T 15157.2-2015 (GB/T15157.2-2015)
Description (Translated English) Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm with common mounting features
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard L23
Classification of International Standard 31.220.10
Word Count Estimation 83,886
Date of Issue 2015-12-31
Date of Implementation 2017-01-01
Older Standard (superseded by this standard) GB/T 15157.2-1998
Regulation (derived from) State Standard Announcement 2015 No.43
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 15157.2-2015: Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm with common mounting features



---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Connectors for frequencies below 3 MHz for use with printed boards - Part 2. Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm with common mounting features ICS 31.220.10 L23 National Standards of People's Republic of China Replacing GB/T 15157.2-1998 QC010000 ×× 0002 PCB Connectors for frequencies below 3MHz for Part 2. Evaluation of the quality of general Install feature basic grid 2.54mm PCB use Two connectors detailed specification Part 2. Detailspecificationfortwo-partconnectors withassessedquality, forprintedboards, forbasicgridof (IEC 60603-2.1995, Connectorsforfrequenciesbelow3MHzforusewith printedboards-Part 2. Detailspecificationfortwo-partconnectorswith assessedquality, forprintedboards, forbasicgridof 2.54mm (0.1in) withcommonmountingfeatures, IDT) Issued on. 2017-01-01 2015-12-31 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 2 model name General features 4 4 5 Size 11 6 standard gauge 46 7 Characteristics 48 8 Test List 53 9 Quality assessment procedures 70 10 Ordering Information 72 Appendix A (normative) Test procedure BP3.2. industrial atmospheric corrosion 73 Special contacts Appendix B (Informative Appendix) M connector species 75 Annex C (normative) Test Method inductor 77

Foreword

GB/T 15157 "printed boards with Connectors for frequencies below 3MHz for" consists of the following components. --- Part 1. Generic specification - General requirements and preparation of detail specifications, with assessed quality guidelines; --- Part 2. Evaluation of quality of printed boards having a universal mounting feature basic grid of 2.54mm with two connectors Details specification; --- Part 3. having contacts center spacing of 2.54mm and staggered terminations at the same spacing of the two-piece connecting printed boards Connector; --- Part 4. having a contact pitch of 1.91mm centers and staggered terminations at the same spacing of the two-piece connecting printed boards Connector; --- Part 5. pitch of 2.54mm double-sided PCB with the edge of the receptacle connector and two connectors; --- Part 6. nominal thickness of 1.6mm single-sided or double-sided PCB with contact pitch of 2.54mm edge of the receptacle connector And PCB connectors; --- Part 7. Assessment of quality with common mating features eight fixed and free connectors detail specification; --- Part 8. a square male contacts 0.63mm × 0.63mm PCB basic grid of 2.54mm with two formula Connector; --- Part 9. basic grid of printed boards, backplanes, and cables for a connector two 2.54mm connector; --- Part 10. Anti-mounting a basic grid of 2.54mm PCB with two connectors; --- Part 11. Detail specification for concentric connectors (fixed and free connectors connector size); --- Part 12. Dimensions of the IC socket, general requirements and test methods for detailed specifications; --- Part 13. Evaluation of quality of untouchability having insulation displacement terminations (ID) free connectors, basic grid of 2.54mm Detail specification PCB with two connectors; --- Part 14. Audio, video and audio-visual equipment detailed specification for audio and video low circular connectors. This section is GB/T Part of 215,157. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 15157.2-1998 "PCB Connectors for frequencies below 3MHz Part 2. Evaluation of quality PCB has a universal mounting feature basic grid 2.54 mm with two connectors detailed specification. " This portion GB/T 15157.2-1998 compared to the main changes are as follows. --- Increasing the variety W two connectors and related requirements; --- Current carrying capacity of "all contacts" to "signal contacts" (see 723, 1998 Edition 7.2.3.); --- Increased crosstalk requirements (see 7.2.7); --- Added "Appendix C inductive test methods." This section uses the translation method is equivalent to using IEC 60603-2.1995 "PCB Connectors for frequencies below 2 3MHz Part of. Assessed quality PCB with common mounting features basic grid 2.54mm (0.1in) with two connectors detailed specification "and repair Change a single 1 (2000). For ease of use, this section for the following editorial changes. --- Modify the standard name; --- Remove the imperial units; --- Delete references to normative documents and content without the corresponding standard number. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This section is under the jurisdiction of the National electronic equipment Electromechanical components for Standardization Technical Committee (SAC/TC166). This section is drafted. Guizhou Space Appliance Co., Ltd., Shenzhen Dinuo Wei Technology Co., Ltd., China Electronics Standardization Institute Study hospital. The main drafters of this section. MING - Liu election, Shao Zhenghua, Austrian Chen Ding Ran. This part of the standard replaces the previous editions are. --- GB/T 15157.2-1998. PCB Connectors for frequencies below 3MHz for Part 2. Evaluation of the quality of general Install feature basic grid 2.54mm PCB use Two connectors detailed specification

1 Scope

GB/T 15157 apply to this part of the relevant two-piece printed circuit board connectors. The group connector range from a high density of the contact member Low voltage connector (varieties B and C) to have less contact high current and high voltage connector (species D, E, F, G and H). It also W varieties suitable for two-piece connector that is used for frequencies above 3MHz, additional grounding requirements, an increase of C-shaped ground plate (shield) of Connector. This section also applies to the two varieties of M-type connector. The varieties have two, four or six holes are equipped with different types of special contacts, Such as coaxial, high voltage or current contacts (see Appendix B), the remaining 78, 60 or 42 holes equipped with the same varieties C connector The contacts. This section also applies to species Q, R, S, T, U and V two-piece connector male contacts mounted on a fixed plate mounted connectors, Female contacts mounted on the free board mounted connector. All connectors have the same installation characteristics, regardless of their different usage characteristics. Of the connector mounted on the printed circuit board Branch has access terminal applicable to IEC 60326-3.1991 and complies with the provisions of GB/T 1360-1998 the provisions of 2.54mm grid PCB. Free board mounted connector having a mating end solder or flat quick-connect fixing plate mounted connector has soldering, insulation displacement connectors, wire wrap, Threaded end and a mating end flat quick-connect. Fixing plate mounted connector terminations arrangement should apply in line with GB/T 1360-1998 2.54mm predetermined grid motherboard, and wiring technology is suitable for automation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 1360-1998 printed circuit grid system (idt IEC 60097.1991) GB/T 2421-1999 Environmental testing for electric and electronic products - Part 1. General (idt IEC 60068-1. 1988) GB/T 5095.2-1997 electronic equipment - Basic testing procedures and measuring methods - Electromechanical components - Part 2. General examination, electrical Continuity and contact resistance tests, insulation tests and voltage stress test (idt IEC 60512-2. 1985) GB/T 5095.3-1997 electronic equipment - Basic testing procedures and measuring methods - Electromechanical components - Part 3. Current - carrying capacity test Test (idt IEC 60512-3. 1976) GB/T 5095.4-1997 electronic equipment - Basic testing procedures and measuring methods - Electromechanical components - Part 4. Dynamic stress test Test (idt IEC 60512-4. 1976) GB/T 5095.5-1997 electronic equipment - Basic testing procedures and measuring methods - Electromechanical components - Part 5. Impact tests (from

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 15157.2-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 15157.2-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 15157.2-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 15157.2-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 15157.2-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15157.2-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.