|
US$1899.00 ยท In stock
Delivery: <= 13 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1483.3-2008: Gauges for lamp caps and lamp holders -- Part 3: Gauges for pre-focus caps and lamp holders
Status: Valid GB/T 1483.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1483.3-2008 | English | 1899 |
Add to Cart
|
13 days [Need to translate]
|
Gauges for lamp caps and lamp holders -- Part 3: Gauges for pre-focus caps and lamp holders
| Valid |
GB/T 1483.3-2008
|
| GB/T 1483.3-2002 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Gauges for pin lamp holders
| Obsolete |
GB/T 1483.3-2002
|
PDF similar to GB/T 1483.3-2008
Basic data | Standard ID | GB/T 1483.3-2008 (GB/T1483.3-2008) | | Description (Translated English) | Gauges for lamp caps and lamp holders -- Part 3: Gauges for pre-focus caps and lamp holders | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K74 | | Classification of International Standard | 29.140.10 | | Word Count Estimation | 86,881 | | Date of Issue | 2008-04-29 | | Date of Implementation | 2008-12-01 | | Older Standard (superseded by this standard) | GB/T 6998-2002 | | Quoted Standard | GB/T 230.1; GB/T 1406.3; GB/T 1483.1; GB/T 1957; GB/T 3505; IEC 60061-2 | | Adopted Standard | IEC 60061-3-2004, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6, 2008 (No. 119 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the test pre-focus style cap and socket interchangeability dimensions gauge type, size, purpose and test methods. This section applies to the design and manufacture for the test according to GB/T 1406. 3 and GB/T 19148. 3 production of pre-focus style cap and socket gauge. | GB/T 1483.3-2008: Gauges for lamp caps and lamp holders -- Part 3: Gauges for pre-focus caps and lamp holders
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Gauges for lamp caps and lampholders Part 3. Gauges for prefocus capsand lampholders
ICS 29.140.10
K74
National Standards of People's Republic of China
Replacing GB/T 6998-2002
Lamp caps and Inspection gauges
Part 3. pre-focus lamp holder, lamp holder gauge
(IEC 60061-3.2004, Lampcapsandholderstogetherwithgaugesforthe
controlofinterchangeabilityandsafety-Part 3. Gauges, MOD)
Posted 2008-04-29
2008-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 1483 "Lamp caps inspection gauge" is divided into five sections.
Part 1. screw-on cap, the amount of the lamp holder gauge;
Part 2. Pin lamp holder, lamp holder the amount of regulation;
Part 3. pre-focus lamp holder, lamp holder the amount of regulation;
Part 4. Miscellaneous lamp, lamp holder the amount of regulation;
Part 5. bayonet lamp holder gauge.
This section GB/T 1483 Part 3.
GB/T 1483 to modify this section using IEC 60061-3.2004 "Lamp caps and holders to test its safety and interchangeability gauge
Part 3. Gauges "(Version 3.39) in English.
This part of IEC 60061-3.2004 (3.39 version) in the English version of the technical content of the relevant portion of the gauge pre-focus lamp holder, lamp holder
On exactly the same.
For ease of use, this section also made the following editorial changes.
a) instead of as a decimal by decimal comma ",". ",";
b) "this International Standard" be replaced by "this section";
c) Remove IEC 60061-3 standard preface and introduction;
d) To be consistent with the existing standards and technical content in this section, the name of the international standards "," Lamp caps and holders of its inspection
Interchangeability and safety gauges - Part 3. Gauges "" to "" Lamp caps Gauges - Part 3. Pre-Focused
The amount of lamp holders regulation "."
This Part replaces GB/T 6998-2002 "pre-focus lamp caps gauge."
The main difference compared to part with the GB/T 6998-2002 as follows.
--- Retains all the technical content of the original standard lamp holder gauge;
--- Added cap gauge model. PGJ19-1, PGJ19-2 and PGJ19-3 lamp through regulation; PGJ19-4 and PGJ19-5 cap
Inspection PGJ19 lamp through regulation and only regulation;; amount through regulation and inspection PG20 PGU20 elastic cap regulation; lamp test PG20
The amount of head contact with the regulation; P23t lamp-gauge "A"; P23t lamp-gauge "B";
Added --- lampholders gauge.
This part is proposed by the China National Light Industry Council.
This part of the National Electric lighting Standardization Technical Committee (SAC/TC224) centralized.
This part mainly drafted by. Beijing Institute of electric light.
The main drafters of this section. Zhao Xiurong, Yang Xiaoping, Jiang Shan, Duan Yan Fang.
This part of the standard replaces the previous editions are.
--- GB/T 6998-1986;
--- GB/T 6998-2002.
Lamp caps and Inspection gauges
Part 3. pre-focus lamp holder, lamp holder gauge
1 Scope
This section provides inspection and pre-focus lamp caps and holders interchangeability dimensions gauge type, size, purpose and test methods.
This section applies to the design and manufacture for testing in accordance with GB/T 1406.3 and GB/T 19148.3 production of pre-focus lamp holder and lamp
Gauge seat.
2 Normative references
The following documents contain provisions which, through GB/T reference in this 1483 constitute provisions of this part. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 230.1 Metallic Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T scale)
(GB/T 230.1-2004, ISO 6508-1.1999, MOD)
GB/T 1406.3 lamp types and dimensions - Part 3. pre-focus lamp holder (GB/T 1406.3-2008, IEC 60061-1.
2005, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeabilityandsafety-
Part 1. Lampcaps, MOD)
GB/T 1483.1 Lamp caps Gauges - Part 1. Screw-type lamp holder gauge (GB/T 1483.1-2008,
IEC 60061-3.2004, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeability
andsafety-Part 3. Gauges, MOD)
GB/T 1957 smooth limit gauge the technical conditions (GB/T 1957-2006, ISO /DP1938-2. 1983, NEQ)
GB/T 3505 Geometrical product specification the term structure of the surface contours of the surface structure of the law, definitions and parameters
(GB/T 3505-2000, eqv ISO 4287.1997)
IEC 60061-2 Lamp caps and holders the amount of test its safety and interchangeability regulation Part 2. Lampholders (Lampcapsandhold-
erstogetherwithgaugesforthecontrolofinterchangeabilityandsafety-Part 2. Lampholders)
3 Product Categories
This section provides the gauge divided by end-use through regulation, only regulation and a contact regulation categories.
4. Technical Requirements
4.1 gauge material, face hardness and surface roughness of the main technical requirements should be consistent with GB/T 1957 requirements.
4.2 factory metrology department should verify the certificate.
5 signs and packaging
5.1 gauge of non-working surface, the following should be clear and firm signs.
a) gauge model. The model is consistent with the corresponding test bulb socket.
b) the type of gauge or special code.
----Gauge "on" or "T";
|