|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14625.3-2008: Test methods for basketball, football, volleyball and handball -- Part 3: The determination of resistance to shock
Status: Valid GB/T 14625.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14625.3-2008 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Test methods for basketball, football, volleyball and handball -- Part 3: The determination of resistance to shock
| Valid |
GB/T 14625.3-2008
|
| GB/T 14625.3-1993 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Basketball, football, volleyball, handball. The determination of resistance to shock
| Obsolete |
GB/T 14625.3-1993
|
PDF similar to GB/T 14625.3-2008
Basic data | Standard ID | GB/T 14625.3-2008 (GB/T14625.3-2008) | | Description (Translated English) | Test methods for basketball, football, volleyball and handball -- Part 3: The determination of resistance to shock | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y56 | | Classification of International Standard | 97.220.01 | | Word Count Estimation | 6,641 | | Date of Issue | 2008-12-30 | | Date of Implementation | 2009-09-01 | | Older Standard (superseded by this standard) | GB/T 14625.3-1993 | | Quoted Standard | GB/T 14625.4; GB/T 14625.5 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the basketball, dynamic test method handball impact resistance, volleyball, football. This section applies to racing and daily activities with basketball, football, volleyball, handball. | GB/T 14625.3-2008: Test methods for basketball, football, volleyball and handball -- Part 3: The determination of resistance to shock
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for basketball, football, volleyball and handball.Part 3. The determination of resistance to shock
ICS 97.220.01
Y56
National Standards of People's Republic of China
GB/T 14625.3-2008
Replace GB/T 14625.3-1993
Basketball, football, volleyball, handball test methods
Part 3. Dynamic impact test method
Released on.2008-12-30
2009-09-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration issued
Foreword
GB/T 14625 "Basketball, Football, Volleyball, Handball Test Method" is divided into five parts.
---Part 1. Determination of roundness;
--- Part 2. Determination of the rebound height;
---Part 3. Dynamic impact test method;
--- Part 4. Test conditions and sample preparation;
--- Part 5. Measurement of circumference length and circumference difference.
This part is the third part of GB/T 14625.
This section refers to the FIBA "Basketball Competition Rules", FIFA "Football Competition Rules", and the International Volleyball "Volleyball Competition Rules"
Formulated.
This part replaces GB/T 14625.3-1993 "Basketball, Football, Volleyball, Handball Dynamic Impact Test Method".
The main changes in this section compared with GB/T 14625.3-1993 are as follows.
a) add "normative references";
b) increase and refine the “rebound board” requirement in the “device”;
c) Replace Chapter 4 “Test Conditions” and Chapter 5 “Samples” in Chapter 5, “Test Conditions and Preparation of Samples”;
d) delete the “tightening the anchor screw” in Chapter 7 of the original standard;
e) adding “appearance” requirements in Chapter 8, “Representation of Results”;
f) Delete 8.1 and 8.2 of the original standard.
This part was proposed by the China Light Industry Federation.
This part is under the jurisdiction of the National Leather Industry Standardization Technical Committee (SAC/TC252).
This section drafted by. High-speed rail testing equipment (Dongguan) Co., Ltd., National Sports General Administration Equipment and Equipment Center, China Leather and Shoemaker
Industry Research Institute, Guangzhou Hailesi Ball Manufacturing Co., Ltd., Yuxi (Kunshan) Sporting Goods Co., Ltd.
The main drafters of this section. Chen Jingchang, South Korea Chun, Zhong Yaoqiang.
This section was first released in September.1993 and this is the first revision.
GB/T 14625.3-2008
Basketball, football, volleyball, handball test methods
Part 3. Dynamic impact test method
1 Scope
This part of GB/T 14625 specifies the test methods for the dynamic impact resistance of basketball, football, volleyball and handball.
This section applies to basketball, football, volleyball, and handball for competitions and daily activities.
2 Normative references
The provisions in the following documents become the provisions of this part by reference in this part of GB/T 14625. Quotations with dated
And all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved in accordance with this section.
The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this
section.
GB/T 14625.4 Basketball, football, volleyball, handball test methods - Part 4. Test conditions and sample preparation
GB/T 14625.5 Basketball, football, volleyball, handball test methods - Part 5
3 Principle
Using a ball-type pressure impact tester, using two high-speed rotating drums up and down, the specimen is high under friction and extrusion.
Speed throwing, impact rebound plate, rebound plate will rebound the sample into the ball bag, pass to the projectile drum under the action of gravity, throw the sample again,
After a specified number of tests, check the pressure change in the sample, and whether there are cracks, implosion, peeling, degumming, wire breakage, deformation and so on.
4 device
4.1 Pressure impact tester, its main components should meet the following requirements.
---Planing drum, diameter 600mm, thickness 250mm, drum arc radius 336.55mm±1.50mm, drum speed
340r/min±10r/min, the distance between the drum and the rebound plate is 1950mm±50mm;
---Rebound plate, phenolic resin board, hardness is Ub hardness HS80 ~ HS90, thickness is 25mm, or made of cloth-based plywood
(Hardness HRC70～HRC80), the angle between the rebound plate and the horizontal plane is 60°±2°, and the distance between the drum and the drum can be adjusted;
--- Photoelectric counting controller that automatically records the number of tests.
4.2 Barometer, accuracy 1.5, range 0MPa ~ 0.16MPa, minimum scale 0.0025MPa.
4.3 Metal tape or fiber tape with a minimum scale of 1mm.
5 Test conditions and sample preparation
Should comply with the provisions of GB/T 14625.4.
6 Test methods
6.1 Measure the circumference and circumference of the specimen according to GB/T 14625.5.
6.2 Adjust the distance between the upper and lower projecting drums according to the type of the sample and the ball number (the distance between the projecting drums is the distance between the axes of the upper and lower projecting drums)
Leave) to comply with Table 1.
GB/T 14625.3-2008
Table 1 The distance between the projecting drums is in millimeters.
Name basketball football volleyball handball
Ball number 7 6 5 5 4 3 5 4 3 4 3
Drum track 180 170 160 160 145 130 155 145 135 140 130
6.3 Start the pressure impact test machine, idling for 2min, put the sample, predict 3 times ~ 5 times, adjust the position of the rebound plate, make the sample basically rush
Hit the middle of the rebound and bounce into the catching bag.
6.4 Adjust the preselection switch of the counter to the number of times required for measurement.
6.5 Start the test machine, put in the sample, and start the test.
6.6 Arrive the specified number of times, lower the block before the projectile drum, take out the sample, and let stand for 30 minutes.
6.7 Check the sample for cracks, implosion, degumming, wire breakage, deformation, etc.
6.8 Measure the circumference and circumference of the specimen according to GB/T 14625.5.
6.9 Measure the pressure inside the sample.
7 Handling precautions
7.1 Stop before stopping the distance between the projectile drums.
7.2 The test cannot be carried out due to the quality problem of the sample, record the number of tests, end the test, and determine that the test is not
qualified.
7.3 The test is interrupted due to power outage, equipment failure and other reasons. The test is terminated and the test is judged to be invalid. The test is resampled.
8 representation of the result
8.1 Appearance
It is indicated by whether the sample is cracked, imploded, degummed, broken, deformed, etc.
8.2 deformability
Expressed by the difference between the test and the pre-test circumferential difference, calculated according to formula (1).
ΔLm = ΔL2-ΔL1 (1)
In the middle
ΔLm---deformation value in millimeters (mm);
ΔL1---the circumferential difference before the test, the unit is mm (mm);
ΔL2---The circumferential difference after the test, in millimeters (mm).
The calculation result retains a valid number.
8.3 expansion ratio
Calculated by the ratio of the average circumference of the test to the average circumference before the test, calculated according to formula (2).
ΔR=L2L1
(2)
In the middle
ΔR---expansion ratio;
L1---average circumference before test, in millimeters (mm);
L2---The average circumferential length after testing, in millimeters (mm).
The result of the calculation retains two significant digits after the decimal point.
8.4 Percentage change of air pressure in the ball
The amount of change in the gas pressure in the sample after the test is expressed as a percentage of the gas pressure in the sample before the test, and is calculated according to the formula (3).
X=P2-P1P1 ×
100 (3)
GB/T 14625.3-2008
In the formula.
X---% change in the pressure inside the ball, %;
P1---the gas pressure in the sample before the test, the unit is MPa (MPa);
P2---The gas pressure in the sample after the test, the unit is MPa (MPa).
The result of the calculation retains a significant number after the decimal point.
9 test report
The test report should contain the following.
a) the number of this part;
b) sample name, number, type, manufacturer (or trademark), date of manufacture;
c) test results (circumference length, circumferential difference, number of tests, deformability, expansion ratio, percentage change of pressure within the ball);
d) anomalies that occur during the test;
e) The difference between the measured method and this part.
f) Tester and date.
GB/T 14625.3-2008
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14625.3-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 14625.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14625.3-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14625.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14625.3-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14625.3-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|