|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14625.2-2008: Test methods for basketball, football, volleyball and handball -- Part 2: The measurement of bouncing altitude
Status: Valid GB/T 14625.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14625.2-2008 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Test methods for basketball, football, volleyball and handball -- Part 2: The measurement of bouncing altitude
| Valid |
GB/T 14625.2-2008
|
| GB/T 14625.2-1993 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Basketball, football, volleyball, handball. The measurement of bouncing altitude
| Obsolete |
GB/T 14625.2-1993
|
PDF similar to GB/T 14625.2-2008
Basic data | Standard ID | GB/T 14625.2-2008 (GB/T14625.2-2008) | | Description (Translated English) | Test methods for basketball, football, volleyball and handball -- Part 2: The measurement of bouncing altitude | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y56 | | Classification of International Standard | 97.220.01 | | Word Count Estimation | 8,863 | | Date of Issue | 2008-12-30 | | Date of Implementation | 2009-09-01 | | Older Standard (superseded by this standard) | GB/T 14625.2-1993 | | Quoted Standard | GB/T 14625.4 | | Regulation (derived from) | National Standard Announcement 2008 No.25 (Total No.138) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the basketball, determination handball rebound height, volleyball, football. This section applies to racing and daily activities with basketball, football, volleyball, handball. | GB/T 14625.2-2008: Test methods for basketball, football, volleyball and handball -- Part 2: The measurement of bouncing altitude
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for basketball, football, volleyball and handball.Part 2. The measurement of bouncing altitude
ICS 97.220.01
Y56
National Standards of People's Republic of China
GB/T 14625.2-2008
Replace GB/T 14625.2-1993
Basketball, football, volleyball, handball test methods
Part 2. Determination of bounce height
Released on.2008-12-30
2009-09-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration issued
Foreword
GB/T 14625 "Basketball, Football, Volleyball, Handball Test Method" is divided into five parts.
---Part 1. Determination of roundness;
--- Part 2. Determination of the rebound height;
---Part 3. Dynamic impact test method;
--- Part 4. Test conditions and sample preparation;
--- Part 5. Measurement of circumference length and circumference difference.
This part is the second part of GB/T 14625.
This section refers to the FIBA "Basketball Competition Rules", FIFA "Football Competition Rules", and the International Volleyball "Volleyball Competition Rules"
Formulated.
This part replaces GB/T 14625.2-1993 "Basketball, Football, Volleyball, Handball Bounce Height Determination Method".
The main changes in this section compared with GB/T 14625.2-1993 are as follows.
a) the addition of “normative references”;
b) increase the requirements of “rebound board” and “test photocell” in “device”;
c) expanded the scope of testing;
d) Replace Chapter 4 “Test Conditions” and Chapter 5 “Samples” in Chapter 5, “Test Conditions and Preparation of Samples”.
This part was proposed by the China Light Industry Federation.
This part is under the jurisdiction of the National Leather Industry Standardization Technical Committee (SAC/TC252).
This section drafted by. High-speed rail testing equipment (Dongguan) Co., Ltd., National Sports General Administration Equipment and Equipment Center, China Leather and Shoemaker
Industry Research Institute, Guangzhou Hailesi Ball Manufacturing Co., Ltd., Yuxi (Kunshan) Sporting Goods Co., Ltd.
The main drafters of this section. Chen Jingchang, South Korea Chun, Zhong Yaoqiang.
This section was first published in.1993 and this is the first revision.
GB/T 14625.2-2008
Basketball, football, volleyball, handball test methods
Part 2. Determination of bounce height
1 Scope
This part of GB/T 14625 specifies the method for determining the rebound height of basketball, football, volleyball and handball.
This section applies to basketball, football, volleyball, and handball for competitions and daily activities.
2 Normative references
The provisions in the following documents become the provisions of this part by reference in this part of GB/T 14625. Quotations with dated
And all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved in accordance with this section.
The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this
section.
GB/T 14625.4 Basketball, football, volleyball, handball test methods - Part 4. Test conditions and sample preparation
3 Principle
Using a ball rebound height gauge, the specimen is free-falling at a height of 1800 mm (based on the lower point of the ball), and the contact is reversed.
The sample rebounds after the elastic plate, after 1000mm, 1100mm, 1200mm, 1300mm, 1400mm, 1500mm, 1600mm height
The photoelectric sensor measures, the initial velocity of the rebound is calculated by the computer, and the actual rebound height of the sample is calculated according to the law of conservation of energy.
4 device
4.1 Ball rebound height gauge
Its main components should meet the following requirements.
--- Positioning the arm to ensure that the distance between the undercut point and the rebound plate of the sample is (1800 ± 2) mm;
--- Fixture, after the sample is positioned, the clamps on the left and right sides are simultaneously extended, the sample is clamped, the positioning arm is removed, and the clamp switch is released.
Free fall. The fixture can adjust the distance up and down according to the specifications of the sample, so as to clamp the sample at the axial center, and left
Right symmetry
---Rebound plate, phenolic resin board, hardness is HS80~HS90, thickness is 25mm, or it is made of hardwood to ensure rebound
Height error ± 2mm;
---Test the photocell, at a height of 1000mm, 1100mm, 1200mm, 1300mm, 1400mm from the rebound plate,
Between 1500mm and 1600mm, there are respectively symmetrical photoelectric transmitting tubes and receiving tubes;
--- Measure the photocell, the rebound test area is 370mm × 370mm area, and the polarization photoelectric tube is installed at the edge of the test area.
During the rebound process, the test area is popped up, and the measured photodiode is measured and displayed;
--- Display, recording device, can automatically display and record the number of bounces and bounce height.
4.2 Barometer
The accuracy is 1.5, the range is 0~0.16MPa, and the minimum scale is 0.0025MPa.
5 Test conditions and sample preparation
Should comply with the provisions of GB/T 14625.4.
GB/T 14625.2-2008
6 Test methods
6.1 Turn on the power switch and turn on the microcomputer switch.
6.2 According to the type of sample, press the corresponding button on the test selector (the test selector is divided into basketball, football, volleyball, handball "male",
Handball "female" five files).
6.3 Press the reset button, the sample positioning arm extends, in the middle waiting position, the clamp is retracted into the instrument, and the preparation is completed.
6.4 Place the sample on the positioning arm (the ball is up), the clamp automatically extends to clamp the sample, and the sample positioning arm is retracted into the instrument.
The sample is free to fall, rebounded by the rebound plate and photocell test, and the number of tests and the rebound height are displayed on the display.
6.5 Press the save button and the instrument will automatically record the test results.
6.6 Press the Continue button and repeat 6.3 to 6.5 to test again.
6.7 Repeat the test 10 times.
6.8 At the end of the test, press the average button to automatically output and print out the test results.
7 Handling precautions
7.1 Adjust the horizontal screw of the base of the main unit before the test so that the level of the base is level and the body is in the vertical position.
7.2 The rebound trajectory of the sample caused by the production process is skewed. The instrument display data is for reference only. It is empirically determined whether the test is performed.
effective.
7.3 The rebound height is lower than 1000mm or higher than 1600mm. It is considered that the test is invalid. If the cumulative 3 times is invalid, the sample will be rebounded high.
The degree test failed.
7.4 If the test is invalid, press the retest button, the test result will not be recorded, and the test can be re-tested.
8 representation of the result
The bounce height is expressed as the arithmetic mean of the number of valid tests, calculated according to equation (1).
(1)
In the formula.
Shape --- the number of valid tests.
The calculation results retain four significant figures.
9 test report
The test report should contain the following.
a) the number of this part;
b) sample name, number, type, manufacturer (or trademark), date of manufacture;
c) test results (number of tests, each test value, average value);
d) anomalies that occur during the test;
e) The difference between the measured method and this part.
f) Tester and date.
GB/T 14625.2-2008
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14625.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 14625.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14625.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14625.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14625.2-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14625.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|