|
US$989.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14560-2022: Crawler cranes
Status: Valid GB/T 14560: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14560-2022 | English | 989 |
Add to Cart
|
7 days [Need to translate]
|
Crawler cranes
| Valid |
GB/T 14560-2022
|
| GB/T 14560-2016 | English | 348 |
Add to Cart
|
1 days [Need to translate]
|
Crawler cranes
| Obsolete |
GB/T 14560-2016
|
| GB/T 14560-2011 | English | RFQ |
ASK
|
7 days [Need to translate]
|
Crawler cranes
| Obsolete |
GB/T 14560-2011
|
| GB/T 14560-1993 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Technical requirement for cranes with litting capacity up to 150 tons
| Obsolete |
GB/T 14560-1993
|
PDF similar to GB/T 14560-2022
Basic data | Standard ID | GB/T 14560-2022 (GB/T14560-2022) | | Description (Translated English) | Crawler cranes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Word Count Estimation | 51,550 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 14560-2022: Crawler cranes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Crawler cranes
ICS 53.020.20
CCSJ80
National Standards of People's Republic of China
Replaces GB/T 14560-2016
crawler crane
Published on 2022-07-11
2023-02-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Technical requirements 3
5 Test methods 13
6 Inspection rules 29
7 Instructions for use and signs 30
8 Packaging, transport and storage 31
Appendix A (Informative) Schematic Diagram of Main Structure of Crane 32
Appendix B (informative) Main forms of crane jib combination 35
Appendix C (normative) Calculation method for average ground contact pressure of crawler 37
Appendix D (normative) Structural Test Methods 38
Appendix E (normative) Inspection item 44
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document replaces GB/T 14560-2016 "Crawler Cranes", compared with GB/T 14560-2016, except for structural adjustment and editorial
In addition to the changes, the main technical changes are as follows.
--- Changed normative references (see Chapter 2, Chapter 2 of the.2016 edition);
--- Changed terms and definitions (see Chapter 3, Chapter 3 of the.2016 edition);
--- Changed the requirements for the altitude of the workplace (see 4.1.1, 4.1.1 of the.2016 edition);
--- Changed the requirements for non-working wind speed (see 4.1.3, 4.1.3 of the.2016 edition);
--- Increased the requirements for the relative error of the operating speed of the telescopic mechanism (see 4.2.1.5);
--- Increased the requirements for the limit value of exhaust smoke (see 4.2.3);
--- Changed the weld defect quality classification and weld inspection requirements (see 4.2.6, 4.2.5 of the.2016 edition);
--- Changed the requirements for the head displacement of the boom (see 4.2.8, 4.2.7 of the.2016 edition);
--- Change the requirements of the luffing mechanism (see 4.4.2, 4.4.2 of the.2016 edition);
--- Increased the requirements of the telescopic mechanism (see 4.4.3);
--- Increased the sealing requirements during the sealing performance test (see 4.5.1.8);
--- Changed the requirements for the amplitude limiter, the device to prevent the boom from tipping back, and the angle limiter (see 4.8.2.3, 4.8.2.4, 4.8.2.5,
4.8.2.3, 4.8.2.4, 4.8.2.5 of the.2016 edition);
--- Changed the content of the main dimension determination (see 5.3.1, 5.3.1 of the.2016 edition);
--- Changed the test methods for the maximum lifting speed and maximum turning speed (see 5.3.3.1, 5.3.3.3, 5.3.3.1,.2016 edition
5.3.3.3);
--- Added the measurement method for the extension and retraction time of the main boom (see 5.3.3.5);
--- Added the deviation test chart (see 5.5.2);
---In the no-load test, the test method for the boom extension is added (see 5.6.2.5);
--- Changed the rated load test method (see 5.7.2.1, 5.7.2.1 of the.2016 edition);
--- Changed the dynamic load test method (see 5.8.2.1, 5.8.2.3, 5.8.2.1, 5.8.2.3 of the.2016 edition);
--- Changed the static load test method (see 5.9.2, 5.9.2 of the.2016 edition);
--- Changed the sealing performance test method (see 5.11, 5.11 of the.2016 edition);
--- Change "engine exhaust pollutant measurement" to "exhaust smoke measurement" (see 5.13, 5.13 of the.2016 edition);
--- Added the schematic diagram of the main structure of the box boom crane (see Figure A.3);
--- Changed the schematic diagram of the crane boom assembly (see Appendix B, Appendix B of the.2016 edition);
--- Changed the calculation method of the average ground contact pressure of the track (see Appendix C, Appendix C of the.2016 edition);
--- Changed the structural test method (see D.1.1.1, D.1.1.3, D.1.1.1, D.1.1.3 of the.2016 edition);
--- Changed the table of inspection items (see Table E.1, Table E.1 of the.2016 edition).
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Machinery Industry Federation.
This document is under the jurisdiction of the National Standardization Technical Committee of Hoisting Machinery (SAC/TC227).
This document is drafted by. XCMG Construction Machinery Co., Ltd. Construction Machinery Branch, Taiyuan University of Science and Technology, China Machinery Science and Technology (Beijing)
Vehicle Inspection Engineering Research Institute Co., Ltd., Zoomlion Heavy Industry Co., Ltd., Zhejiang Sany Equipment Co., Ltd., Liaoning Fuwa Heavy Industry Machinery Co., Ltd.
Co., Ltd.
The main drafters of this document. Sun Li, Xu Gening, Zhou Bo, Sun Ying, Zhang Weidong, Peng Jiwen, Zhang Yuzhu, Liu Pu, Han Lei, Li Weitao, Wang Xianguo,
Meng Xiangji and Chen Hongjian.
The previous versions of this document and its superseded documents are as follows.
---First published in.1993 as GB/T 14560-1993;
---When it was first revised in.2011, it was incorporated into GB/T 13330-1991 "Performance Test Method for Crawler Cranes Below 150t"
content;
---The second revision in.2016, this time is the third revision.
crawler crane
1 Scope
This document specifies the technical requirements, test methods, inspection rules, operating instructions and signs, packaging, transportation and storage of crawler cranes.
This document applies to hydraulic crawler cranes powered by internal combustion engines (hereinafter referred to as "cranes").
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components
GB/T 3811 Crane Design Specification
GB/T 5226.32 Mechanical and Electrical Safety Mechanical and Electrical Equipment Part 32.Technical Requirements for Hoisting Machinery
GB/T 6067.1 Safety Regulations for Lifting Machinery Part 1.General
GB/T 6974.1 Crane Terminology Part 1.General Terms
GB/T 6974.2 Crane Terminology Part 2.Mobile Cranes
GB/T 7935 General Specifications for Hydraulic Components
GB/T 8918 Steel wire ropes for important purposes
GB/T 9969 General Principles of Instruction Manual for Industrial Products
GB/T 10051.1 Lifting hooks - Part 1.Mechanical properties, lifting capacity, stress and materials
GB/T 10051.2 Lifting hooks - Part 2.Specifications for forging hooks
GB/T 12265.3 Minimum distance for mechanical safety to avoid extrusion of various parts of the human body
GB/T 12602 Overload Protection Device for Hoisting Machinery
GB/T 13306 Signs
GB/T 13384 General technical conditions for packaging of mechanical and electrical products
GB/T 15052 Crane Safety Signs and Hazard Graphical Symbols General
GB/T 19418 Guide for quality classification of arc welded joint defects
GB/T 20062 Mobile crane operating noise limits and measurement methods
GB/T 20118 General technical conditions for steel wire ropes
GB/T 20303.2 Crane Cab Part 2.Mobile Crane
GB 20891 Limits and Measurement Methods of Exhaust Pollutants from Diesel Engines for Non-Road Mobile Machinery (China Phase III and IV)
GB/T 21457 Requirements for the measurement accuracy of parameters in the test of cranes and related equipment
GB/T 21458 Mobile Crane Rated Lifting Capacity Chart
GB/T 22358 Earthmoving Machinery Protection and Storage
GB/T 23821 Safety distance of machinery to prevent the upper and lower limbs from touching the danger zone
GB/T 24809.2-2015 Requirements for the mechanism of cranes - Part 2.Mobile cranes
GB/T 24817.2 Crane Control Device Arrangement and Characteristics Part 2.Mobile Cranes
GB/T 24818.2 Crane Access and Safety Protection Facilities - Part 2.Mobile Cranes
|