|
US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14506.24-2010: Methods for chemical analysis of silicate rocks -- Part 24: Determination of cadmium content
Status: Valid GB/T 14506.24: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14506.24-2010 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Methods for chemical analysis of silicate rocks -- Part 24: Determination of cadmium content
| Valid |
GB/T 14506.24-2010
|
| GB/T 14506.24-1993 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Silicate rocks. Determination of cadmium content. Hydrochloric acid-potassium iodide-tetraethyl ammonium bromide (iodide) medium polarographic method
| Obsolete |
GB/T 14506.24-1993
|
PDF similar to GB/T 14506.24-2010
Basic data | Standard ID | GB/T 14506.24-2010 (GB/T14506.24-2010) | | Description (Translated English) | Methods for chemical analysis of silicate rocks -- Part 24: Determination of cadmium content | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | D53 | | Classification of International Standard | 73.080 | | Word Count Estimation | 7,738 | | Date of Issue | 2010-11-10 | | Date of Implementation | 2011-02-01 | | Older Standard (superseded by this standard) | GB/T 14506.24-1993 | | Quoted Standard | GB/T 6682; GB/T 14506.1 | | Regulation (derived from) | National Standard Approval Announcement 2010 No.8 (Total No.163) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the determination of the amount of cadmium silicate rocks. This section applies to the determination of the amount of cadmium silicate rocks. Also applies to the determination of cadmium in soil and stream sediments. Measuring range: 0. 05��g/g or more of cadmium. | GB/T 14506.24-2010: Methods for chemical analysis of silicate rocks -- Part 24: Determination of cadmium content
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of silicate rocks Part 24. Determination of cadmium content
ICS 73.080
D53
National Standards of People's Republic of China
Replacing GB/T 14506.24-1993
Silicate rocks -
Part 24. Determination of cadmium content
Part 24. Determinationofcadmiumcontent
Issued on. 2010-11-10
2011-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 14506 "Methods for chemical analysis of silicate rocks" 30 consists of the following components.
--- Part 1. Determination of water absorption;
--- Part 2. Determination of combined water;
--- Part 3. Determination of the amount of silica;
--- Part 4. Determination of the amount of aluminum oxide;
--- Part 5. Determination of total iron content;
--- Part 6. Determination of calcium oxide content;
--- Part 7. Determination of the amount of magnesium oxide;
--- Part 8. Determination of the amount of titanium dioxide;
--- Part 9. Determination of the amount of phosphorus pentoxide;
--- Part 10. Determination of the amount of manganese oxide;
--- Part 11. Determination of the amount of sodium hydroxide and oxide;
--- Part 12. Determination of the amount of fluorine;
--- Part 13. Determination of sulfur content;
--- Part 14. Determination of ferrous oxide;
--- Part 15. Determination of the amount of lithium;
--- Part 16. Determination of the amount of rubidium;
--- Part 17. Determination of the amount of strontium;
--- Part 18. Determination of copper content;
--- Part 19. Determination of lead content;
--- Part 20. Determination of the amount of zinc;
--- Part 21. Determination of the amount of nickel and cobalt;
--- Part 22. Determination of the amount of vanadium;
--- Part 23. Determination of chromium;
--- Part 24. Determination of cadmium content;
--- Part 25. Determination of molybdenum and tungsten;
--- Part 26. Determination of cobalt content;
--- Part 27. Determination of nickel content;
--- Part 28. Determination of the amount of 16 major and minor components;
Part --- 29. 22 the amount of rare earth element determination;
--- Part 30. Determination of the amount of 44 elements.
This section GB/T 14506 of Part 24.
This Part replaces GB/T 14506.24-1993 "Silicate rocks - hydrochloric acid - potassium iodide - tetraethyl bromide (iodide), ammonium
Determination of cadmium content "medium polarographic method.
Section compared with the GB/T 14506.24-1993 main change this as follows.
--- Increasing the normative references;
--- Increased warning, warning.
This section presents the People's Republic of China Ministry of Land Resources.
This part of the National Standardization Technical Committee under the jurisdiction of Land and Resources.
This section drafted by. National Geological Experimental Test Center.
The main drafters of this section. Wangsu Ming, Yan Maohong.
This part of the standard replaces the previous editions are.
--- GB/T 14506.24-1993.
Silicate rocks -
Part 24. Determination of cadmium content
Warning --- Use this section shall be a person experiences regular laboratory work. This section does not point out all possible security asked
question. Users have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.
1 Scope
GB/T 14506 provisions of this part of the determination of the amount of cadmium silicate rocks.
This section applies to the amount of cadmium determination in silicate rocks, is also applicable to the determination of cadmium in soil and stream sediment volume.
Measuring range. 0.05μg/g or more cadmium.
2 Normative references
The following documents contain provisions which, through reference GB/T 14506 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
Laboratory use specifications and test methods GB/T 6682 Analysis
GB/T 14506.1 Silicate rocks - Part 1. Determination of water adsorption
Principle 3
Samples with hydrochloric acid - nitric acid - hydrofluoric acid decomposition, adding a small amount of perchloric acid and heated and evaporated to do to take the white smoke rush hydrofluoric acid, is converted to
2mol/L hydrochloric acid solution, dried 717 anion exchange resin so many interfering elements cadmium and separation. Cadmium is adsorbed on the resin with hot nitric
Pickling mention evaporated rush nitric acid and hydrochloric acid - potassium iodide - tetraethyl bromide (iodide) ammonium base solution on the oscilloscope pole spectrometer, the peak potential of about
-0.70V (Saturated calomel electrode), adsorption and catalytic current high cadmium concentration peak linear relationship to calculate the amount of cadmium.
4 Reagents
Unless otherwise stated in this section are consistent with the use of analytical reagent and GB/T 6682 analytical laboratory use in the analysis.
4.1 hydrochloric acid (ρ1.19g/mL), pure class distinctions.
4.2 hydrochloric acid (11), pure class distinctions.
4.3 hydrochloric acid (37), pure class distinctions.
4.4 hydrochloric acid c (HCl) = 2mol/L. Take 100mL of hydrochloric acid (4.1) placed in 600mL beaker, add 500mL water, stir well.
4.5 nitrate (ρ1.42g/mL), pure class distinctions.
4.6 nitric acid (19).
4.7 Hydrofluoric acid (ρ1.15g/mL). Warning --- toxic and corrosive hydrofluoric acid, the operation should wear gloves to prevent skin contact.
4.8 perchloric acid (ρ1.67g/mL), pure class distinctions. Warning --- explosive materials, careful
4.9 tetraethylammonium bromide (iodide) ammonium solution (10g/L).
4.10 potassium iodide solution c (KI) = 1mol/L. Weigh 16.6g of potassium iodide, placed in 150mL beaker, add water to dissolve, moved
100mL volumetric flask, dilute to the mark with water, stir well.
4.11 ascorbic acid solution (100g/L). The time is now equipped with.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14506.24-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 14506.24-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14506.24-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14506.24-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14506.24-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14506.24-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|