GB/T 14406: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14406-2011 | English | 155 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Gantry crane for general purpose
| Valid |
GB/T 14406-2011
|
| GB/T 14406-1993 | English | RFQ |
ASK
|
6 days [Need to translate]
|
General purpose gantry cranes
| Obsolete |
GB/T 14406-1993
|
PDF similar to GB/T 14406-2011
Basic data | Standard ID | GB/T 14406-2011 (GB/T14406-2011) | | Description (Translated English) | Gantry crane for general purpose | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.20 | | Word Count Estimation | 41,448 | | Date of Issue | 2011-05-12 | | Date of Implementation | 2011-12-01 | | Older Standard (superseded by this standard) | GB/T 14406-1993 | | Quoted Standard | GB/T 191; GB 755-2008; GB/T 1228; GB/T 1229; GB/T 1230; GB/T 1231; GB 2893; GB/T 3323; GB/T 3632; GB/T 3811-2008; GB 4208; GB 5226.1; GB 5226.2; GB/T 5905; GB 6067.1-2010; GB/T 6974.1; GB/T 6974.5; GB 8918; GB/T 8923; GB/T 9286; GB/T 10051.1-2010; GB/T 10051.2-2010; GB/T 10051.3-2010; GB/T 10051.4-2010; GB/T 10051.5-2010; GB/T 10051.6-2010; GB/T 10051.7-2010; GB/T 10051.8-2010; GB/T 10051.9-2010; GB/T 10051.10-2010; GB/T 10051.11-2010; GB/T 10051.12-2010; GB/T 10095.1; GB/T 10095.2; GB/T 10183.1; GB 12602; GB/T 13306; GB/T 13384; GB 14048.1-2006; GB/T 15052; GB/T 19418; GB/T 20118; GB/T 20303.1; GB/T 20303.5; GB/T 21971; GB/T 21972.1; GB/T 24809.5; GB/T 24811.1; JB/T 5000.8-2007; JB/T 5870; JB/T 6391.1; JB/T 6391.2; JB/T 6392; JB/T 6406; JB/T 7017; JB/T | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the nominal weight of 3. 2t ~ 320t gantry crane generic type classification and basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to open-air operations universal gantry cranes (hereinafter referred to as cranes), and its extract device is a hook, grab or lifting solenoid (electromagnetic chuck), use one or both of two or three. For the nominal weight of more than 320t gantry crane or other common gantry crane in the same section, also refer to the use. | GB/T 14406-2011: Gantry crane for general purpose---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Gantry crane for general purpose
ICS 53.020.20
J80
National Standards of People's Republic of China
Replacing GB/T 14406-1993
Universal gantry crane
Issued on. 2011-05-12
2011-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 3
4 Classification and basic parameters of type 3
4.1 Type Classification 3
4.2 Basic parameters 4
5 Technical requirements 7
5.1 Working conditions 7
5.2 Basic requirements 7
5.3 Performance 7
5.4 Security & Protection 8
5.5 The main components 11
5.6 The main connection member 12
5.7 frame 12
15 5.8 assembly
21 5.9 Electrical Equipment
Painting 23 5.10
6 Test methods 23
6.1 General 23
6.2 Detection frame assembly 23
6.3 Mechanical installation testing 28
6.4 detection mechanism speed and braking distance of 31
6.5 crane noise detection 32
6.6 electronic control equipment in each circuit insulation resistance testing 32
6.7 verify the catch grab the full rate of 32
6.8 verify security magnetic lifting magnet suction ability weight capacity and electronic control system 33
6.9 machine test 33
7 Inspection rules 35
7.1 Inspection classification 35
7.2 factory inspection 35
7.3 Type tests 36
8 signs, packaging, transportation and storage 37
8.1 Marking 37
8.2 Packaging 37
8.3 Transport and storage 37
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 14406-1993 "common gantry crane."
This standard and GB/T 14406-1993 compared to the main changes are as follows.
--- Modify the definition of nominal weight, and will expand the scope of the rated capacity to 320t;
--- Modify the tolerance requirements wheels, carts and trolley tracks;
--- Adjust the crane speed parameter;
--- Adjust the main beam in the vertical position of the boom and the effective cross-static deflection indicators;
--- Adjust the minimum temperature of the crane when working outdoors;
--- Adjust the degree of bend in the main beam span and the camber on the cantilever end requirements;
--- Increase the data "more car" crane;
--- Added "About" and "Terms and Definitions";
--- Increased use of high strength steel bolts to connect large hexagonal head and disc brake rotor runout requirements;
--- Increases the surface quality of the weld requirements;
--- Added "manipulate terrestrial wired, wireless remote control manipulation and multi-point manipulation" security requirements;
--- Added "shock-prone, pummeling, bump, pinch and other unsafe set at the appropriate safety warning signs" and so on;
--- Information about the content and level of anti-single girder roller;
--- Increasing the test method main item;
--- Remove the crane models representation;
--- Remove tolerance control crane metal structure of the selection of materials and structural elements of the manufacturing process;
--- Remove Appendix A.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee crane (SAC/TC227) centralized.
This standard is drafted by. DHI DCW Group Co., Ltd., Beijing Design Institute of lifting the transport machinery, lifting transport Country
Transport machinery for Quality Supervision and Inspection Center.
Participated in the drafting of this standard. Weihua Group Co., Ltd., Shanghai SCCW Ltd., Zhuzhou bridge cranes have shares
Limited, Shanqi Heavy Machinery Corporation, Dalian Heavy Industries Co., Ltd. Brilliant, Chongqing crane factory Co., Ltd., Jiangsu, as Wang crane
Ltd., Guangzhou Lifting Machinery Co., Ltd. Nanjing Hoisting Machinery Plant, Demag Cranes & Components (Shanghai) Co., Ltd., Zhejiang
Public Qingqi Heavy Machinery Manufacturing Co., Ningbo City convex Heavy Industries Ltd., Jiangsu three horse Lifting Machinery Manufacturing Co., Ltd., Jiang Su Wanfu security
Machinery Co., Ltd., Zhengzhou generous bridge Machinery Co., Ltd., Jiangxi Hua Wu Brake Co., Ltd., Wuhan Port Di Electric Co.
The main drafters of this standard. Zeng, Fufeng Zhi, Tao Tianhua road Jianhu, Guosheng Wei, Sun Mingyao, Xu Zhongyi, Zheng Zhengguo, Liu Yongqing, Qian Yong,
Luo Zhen Li, Ge Ming, Kwong Jian, Wang Lee shall be mine, Dong Fuxiang, Zhao Xueming, Xu Zhihong, Zhang Mingliang, Chen Hao, Nie Chunhua, Wang Cai.
This standard replaces the standards previously issued as follows.
--- GB/T 14406-1993.
Universal gantry crane
1 Scope
This standard specifies the nominal weight of 3.2t ~ 320t gantry crane general classification of the type and basic parameters, technical requirements, test
Test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to open-air operations common gantry cranes (hereinafter referred to as cranes), which means to extract the hook, grab or electromagnetic lifting
Iron (magnetic chuck), or both made of two or three.
For the same part of the common gantry crane gantry crane or other weight is greater than the rated capacity of 320t, also with reference to use.
This standard does not apply to the crane under the following conditions.
--- Explosive, flammable gas, dust, and corrosive gas environment;
--- Nuclear radiation environment, toxic gas environment.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 755-2008 rotating motor fixed and performance
GB/T 1228 high strength steel with large hexagon head bolts
GB/T 1229 steel with high strength large hexagon nuts
GB/T 1230 high-strength steel washers
GB/T 1231 Steel hexagon head bolts, hexagon nuts, plain washers for high-strength
GB 2893 Safety colors
GB/T 3323 metal fusion welded joints radiography
GB/T 3632 Steel with torsional shear bolts connecting deputy
GB/T 3811-2008 crane design specifications
GB 4208 housing protection (IP Code)
GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements
GB 5226.2 Safety of machinery - Electrical equipment - Part 32. Requirements for hoisting machines
GB/T 5905 Cranes - Test code and procedures
GB 6067.1-2010 crane safety regulations - Part 1. General
GB/T 6974.1 crane terminology - Part 1. General terms
GB/T 6974.5 cranes terminology - Part 5. Bridge and gantry cranes
GB 8918 important uses rope
GB/T 8923 steel surface before painting Rust grades and grade
Cut test GB/T 9286 Paints and varnishes
GB/T 10051.1 ~ 10051.12-2010 lifting hook
GB/T 10095 (all parts), precision cylinder gear system
GB/T 10183.1 crane and trolley wheels and carts orbit tolerances - Part 1. General
|