HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 14397-2008 English PDF

US$314.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14397-2008: Information technology -- Telecommunication and information exchange between systems -- Start-stop transmission signal quality at DTE/DCE interfaces
Status: Valid

GB/T 14397: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 14397-2008	English	314	Add to Cart	3 days [Need to translate]	Information technology -- Telecommunication and information exchange between systems -- Start-stop transmission signal quality at DTE/DCE interfaces	Valid	GB/T 14397-2008
GB/T 14397-1993	English	359	Add to Cart	3 days [Need to translate]	Information processing--Start-stop transmission signal quality at DTE/DCE interfaces	Obsolete	GB/T 14397-1993

PDF similar to GB/T 14397-2008

Standard similar to GB/T 14397-2008

CJ/T 188 GB/T 25315 YDC 079 GB/T 45279.1 GB/T 45278.1 GB/T 14399

Basic data

Standard ID	GB/T 14397-2008 (GB/T14397-2008)
Description (Translated English)	Information technology -- Telecommunication and information exchange between systems -- Start-stop transmission signal quality at DTE/DCE interfaces
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	L78
Classification of International Standard	35.100.10
Word Count Estimation	16,149
Date of Issue	2008-07-28
Date of Implementation	2009-01-01
Older Standard (superseded by this standard)	GB/T 14397-1993
Adopted Standard	ISOIEC 7480-1991, IDT
Regulation (derived from)	Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall)
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies start-stop transmission of data terminal equipment (DTE) and data circuit terminating equipment (DCE) interface for serial data transfer requirements of the signal quality requirements. This standard specifies interface with the CCITT Recommendation V. 24 (telephone network), CCITT recommendation X. 24 (data network) are consistent.

GB/T 14397-2008: Information technology -- Telecommunication and information exchange between systems -- Start-stop transmission signal quality at DTE/DCE interfaces

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Information technology. Telecommunication and information exchange between systems. Start-stop transmission signal quality at DTE/DCE interfaces ICS 35.100.10 L78 National Standards of People's Republic of China GB/T 14397-2008/ISO /IEC 7480.1991 Replacing GB/T 14397-1993 Information technology - Telecommunications and information exchange DTE/DCE interface Start-stop transmission signal quality (ISO /IEC 7480.1991, IDT) Posted 2008-07-28 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 DTE sending the signal quality 4 4 4.1 DTE sending distortion 5 4.2 character intervals of 5 4.3 The modulation rate accuracy of 5 5 receives DTE tolerance of 5 Receiver tolerance 5.1 5 5.2 character intervals of 5 5.3 The minimum duration of the start symbol 6 6 interchangeable measuring 6 points 6.1 CCITT Recommendation V. 28 Characteristics of measurement generator 6 6.2 CCITT Recommendation V. Measuring 28 on the load side 7 6.3 CCITT Recommendation V. Measuring characteristic generator 10 7 6.4 CCITT Recommendation V. Measuring 810 on the load side 6.5 CCITT Recommendation V. Measuring characteristic generator 9 11 6.6 CCITT Recommendation V. Measuring the load side 10 11 The accuracy of the measuring equipment 10 6.7 Appendix A (informative) asynchronous transmission signal quality at the interface --- mathematical relationship between the signal quality parameters 11 GB/T 14397-2008/ISO /IEC 7480.1991

Foreword

This standard is identical with the international standard ISO /IEC 7480.1991 Flat "Information technology - Telecommunications and information exchange DTE / DCE interface signal quality at the start-stop transmission "(in English). This standard replaces GB/T 14397-1993 "Information processing DTE/Start-stop transmission signal quality of DCE interface." This standard and GB/T 14387-1993 compared to the main changes are as follows. --- Remove the previous version of the content rate characteristics. Appendix A of this standard is the data appendix. This standard by the National Information Technology Standardization Technical Committee and centralized. This standard was drafted. China Electronics Standardization Institute. The main drafters of this standard. Guo Nan, Huang Jiaying, Xu Dongmei, Zhang Cui, Zhang Hui. This standard was first published in 1993. GB/T 14397-2008/ISO /IEC 7480.1991

Introduction

This standard is intended to supplement the electrical characteristics specified in CCITTV series of recommendations, and to provide the above-mentioned series CCITTV Measure the transmission signal quality characteristic of recommendations not included in the document. Start - stop transmission signal quality equipment should meet the requirements of part depending on the application, the timing depends in part on the export of equipment used mechanism. For early start-stop transmission equipment, the timing is controlled by a mechanical source and export, but now more common electron source. Another factor is that since most of the start-stop transmission are inherently carry the signaling transmitting and receiving devices between the Timing information. Start-stop equipment can be interfaced to a converter which converts encoded information within a synchronous transmission system, in this case Under conditions, in the quality of the signal converter interface requirements may need to be more tightly controlled. In order to include two types of applications in both types of devices, signal quality specifications of this standard given in a separate four performance classes do not. Two of (P1 and P2) for mechanical timing DTE1), for the use of two additional electronic timing DTE. by using Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. CCITT Recommendation I. 411 (1988) ISDN user-network interfaces - Reference configuration CCITT Recommendation V. 10 (1988) for unbalanced double electrical interfaces in the field of data communications for use with integrated circuit equipment usually pass Electrical characteristics of the road CCITT Recommendation V. 11 (1988) in the field of data communications through an integrated circuit device is typically used in conjunction with balanced double circuit Electrical Characteristics CCITT Recommendation V. 14 (1988) synchronous bearer channel transmission start-stop characters CCITT Recommendation V. Standardization 21 (1988) Automatic telephone exchange medium used in the 300 bit/s duplex modem CCITT Recommendation V. 22 (1988) Automatic switching network and point-wire leased telephone standardized for use on telephone-type circuits 1200 bit/s duplex modem CCITT Recommendation V. 22bis (1988) mining lease for use on telephone-type circuits in general switched telephone network and point-wire Frequency division technique standardized by 2400 bit/s duplex modem CCITT Recommendation V. 23 (1988) is automatically switched network using standardized 600/1200 baud modem on the phone CCITT Recommendation V. Definitions for interchange circuits 24 (1988) data terminal equipment and data circuit terminal equipment GB/T 14397-2008/ISO /IEC 7480.1991

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14397-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14397-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14397-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14397-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14397-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14397-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.