Powered by Google www.ChineseStandard.net Database: 189760 (20 Jul 2024)

GB/T 25315-2017 PDF in English


GB/T 25315-2017 (GB/T25315-2017, GBT 25315-2017, GBT25315-2017)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 25315-2017English150 Add to Cart 0-9 seconds. Auto-delivery. Home control systems -- Guidelines relating to safety Valid

PDF Preview

Standards related to: GB/T 25315-2017

GB/T 25315-2017: PDF in English (GBT 25315-2017)

GB/T 25315-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 33.040.40
L 78
Replacing GB/T 25315-2010
Home Control Systems - Guidelines Relating to Safety
(IEC Guide 110.2014, MOD)
ISSUED ON. DECEMBER 29, 2017
IMPLEMENTED ON. JULY 1, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration Committee of the People’s
Republic of China.
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative References ... 5 
3 Terms and Definitions ... 6 
4 Home Control System ... 6 
5 Safety Requirements ... 10 
6 Conclusion and Suggestion ... 13 
References ... 15 
Foreword
This Standard is drafted in accordance with stipulations in GB/T 1.1-2009.
This Standard is drafted as a replacement of GB/T 25315-2010 Home Control Systems
- Guidelines Relating to Safety. In comparison with GB/T 25315-2010, apart from
editorial modifications, this Standard has the following main technological changes as
follows.
---Application examples are newly added and adjusted (refer to Chapter 4 in
Version 2010);
---The title of 5.1 is modified to “General Rules”; “electrical safety” is adjusted to
“equipment safety”; consideration of cyber security is newly added (refer to 5.1
in Version 2010);
---Dangerous situations of reserving application are modified (refer to 5.2 in
Version 2010);
---Restart after failure (refer to 5.3.2), full life cycle safety (refer to 5.3.3),
reasonable foreseeable misuse (refer to 5.3.4), contact current accumulation
(refer to 5.3.5) and communication (refer to 5.3.6) are newly added;
---Relevant product fields that might be involved are modified (refer to Chapter 6
in Version 2010).
This Standard is redrafted in accordance with IEC Guide 110.2014 Home Control
Systems - Guidelines Relating to Safety.
The technological differences between this Standard and IEC Guide 110.2014, and
the causes for these differences are listed below.
---In terms of scope, this Standard makes adjustment that brings technological
differences to comply with the specific stipulation of scope in GB/T 1.1-2009;
---In terms of normative references, this Standard makes adjustment that brings
technological differences to comply with the technological conditions of China.
The adjustment is concentratedly reflected in Chapter 2 “Normative
References”. Please see the specific adjustment below.
 GB 4943.1-2011, which is modified in accordance with international standards,
is adopted as a replacement of IEC 60950-1.2005 (refer to 5.3.5);
 ISO/IEC Guide 51, which is not mentioned in the Standard, is deleted;
 Reference IEC 62368-1 is adjusted to normative reference (refer to 5.3.5);
Home Control Systems - Guidelines Relating to Safety
1 Scope
This Standard provides safety-related information of home control systems for signal
transmission through low-voltage or extra-low voltage building wiring (through wired or
wireless mode) for household purposes or places with similar purposes. This Standard
stipulates safety requirements that shall be considered in equipment that constitutes
home control systems, including relevant functional safety and regular safety
requirements.
This Standard is applicable to home control systems that are adopted in the
interconnection of information technology equipment. Home control systems are
merely limited to single residences or commercial places with a similar level of
complexity.
Home control systems, which are involved in this Standard, provide communication
and operation of household equipment (such as control, cooling, heating, illumination,
audio/video, communication and safety of equipment); household gateway between
internal home control system and external wide area network (for example, the
Internet).
Please refer to IEC Guide 107 for stipulations regarding electromagnetic compatibility.
This aspect of content is not included in this Standard.
2 Normative References
The following documents are indispensable to the application of this Standard. In terms
of references with a specified date, only versions with a specified date are applicable
to this Standard. The latest version (including all the modifications) of references
without a specified date is also applicable to this Standard.
GB 4943.1-2011 Information Technology Equipment - Safety - Part 1. General
Requirements (IEC 60950-1.2005, MOD)
IEC 62368-1 Audio/Video, Information and Communication Technology
Equipment - Part 1. Safety Equipment
EN 50491-3 General Requirements for Home and Building Electronic Systems
(HBES) and Building Automation and Control Systems (BACS) - Part 3. Electrical
Safety Requirements
---Fire alarm;
---Window-shades control;
---Garage door remote control switch;
---Different forms of safety control (audio/video).
When several application equipment can be interconnected through home control
network (wired or wireless), a system that is thus generated shall be deemed as a
home control system.
Home control system can be established on different transmission medium (such as
power line, twisted pair, infrared or radio), and interconnected with other external
network (such as telephone network and wired TV network).
Generally speaking, a home control system will be assembled to cover certain
fundamental application, such as illumination, heating and ventilation control. It can
include equipment from different manufacturers. Under most circumstances,
equipment shall comply with different product standards.
Furthermore, this system will probably be expanded to include more application
functions in the future. Under most circumstances, these expansions will not be
completed by previous system installers.
In a regular electrical installation system, each function needs to be equipped with its
own cable; each control system is an independent network. On the contrary, a home
control system can adopt a shared line to complete the induction, conversion, control,
monitoring and signal transmission of all the functions and programs. Equipment can
be directly connected to power or receive power supply through the network.
Home control system includes inter-equipment signal transmission network that is
connected to home network. Equipment is connected through interfaces. Interfaces
can be integrated in equipment. All the equipment that is connected with the home
control system can be managed through a center manager. Communication among
equipment can also be implemented directly without the center manager.
The size of family control system varies. It can be constituted of several types of
equipment, or several hundred types of equipment.
In home control system, home network can adopt several topological structures listed
in Figure 1 below, or a combination of these topologies.
might trigger dangers, limitation of contact current from telecommunication network
and overheating protection of telecommunication network, etc.
Furthermore, several other questions shall also be considered. Standards that provide
specific stipulations of these questions include, but are not limited to.
---Please refer to GB/T 20438 series standard for functional safety questions;
---When equipment or system is connected with network, please refer to EN
50491-3 for certain specific safety requirements;
---Please refer to EN 50491-4-1 for specific stipulations of simultaneously
considering functional safety questions and some electrical safety questions;
---Please refer to GB/T 14536.1-2008 for requirements of system components in
home control system; these components are adopted to guarantee functional
safety of home control system, and cyber security of communication through
open network, for example, mobile network or the Internet.
5.2 Functional Safety
It is suggested that functional safety shall be considered from the following aspects.
design, development and application environment of home control system;
identification of risks and dangerous events; implementation of risk reduction
measures and safety integrity.
It is important that any part in home control system does not rely on unconfirmed safety
determination information. As to new system and modified (configuration expansion
and variation) system, this is also applicable.
The confirmation of safety determination information is probably.
---Clarified (for example. the process of verification);
---Implicit (for example. the application of information pattern that cannot be forged
or imitated).
The network or any other part of home control system shall not influence equipment
safety and shall comply with all the safety requirements of equipment standard.
Likewise, the connection between equipment and network shall not influence the
safety of home control system.
If the safe operation of an equipment depends on its system, but the correctness of its
functions cannot be verified, the equipment shall maintain an appropriate safety level.
Reserved application shall be analyzed to determine all the dangerous situations that
might happen during the operation.
It is equally important that in different product standards, safety shall be handled in a
compatible mode, for example, safe extra-low voltage/ protective extra-low voltage,
creepage distance and electric clearance.
In two different buildings in different potential areas, safety questions regarding the
application of home control system need to be studied.
The connection of application equipment might influence the electromagnetic
compatibility of equipment itself and the control system; the requirements of
electromagnetic compatibility might need to be adjusted in product standard of
application equipment.
5.3.2 Restart after failure
In case of a failure, equipment shall be able to restart safely after power supply is
resumed. The failure might be caused by the equipment itself or external reasons, for
example, power failure. Unwatched equipment operation shall also be taken into
consideration in home network.
5.3.3 Full life cycle safety
Equipment shall be designed in accordance with expected service life. In the end of a
life cycle, equipment safety might become invalid. In addition, the situation of
unwatched equipment shall also be taken into consideration in home network.
5.3.4 Reasonable foreseeable misuse
Any reasonably foreseeable misuse shall be considered in equipment application in
home network system. During this period, equipment safety shall be maintained.
5.3.5 Contact current accumulation
Equipment that provide home network connection to other equipment shall not trigger
dangers because of the accumulation of contact current. Please refer to GB 4943.1-
2011, IEC 62368-1 Appendix W and EN 50491-3 for specific stipulations.
5.3.6 Telecommunication
Equipment safety shall be maintained in home network system; telecommunication
that is independent from home network shall also be maintained. Any interference or
error commands through the network shall not trigger any unsafe situations. Home
network shall be prevented from cyber threats.
6 Conclusion and Suggestion
In terms of the integration of home control system, information technology equipment
and telecommunication technology, please refer to principles and unified terms in IEC
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.