|
US$459.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14225-2008: Mould board plough
Status: Valid GB/T 14225: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14225-2008 | English | 459 |
Add to Cart
|
4 days [Need to translate]
|
Mould board plough
| Valid |
GB/T 14225-2008
|
| GB/T 14225.1-1993 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Mouldboard plough. Types and parameters
| Obsolete |
GB/T 14225.1-1993
|
PDF similar to GB/T 14225-2008
Basic data | Standard ID | GB/T 14225-2008 (GB/T14225-2008) | | Description (Translated English) | Mould board plough | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B91 | | Classification of International Standard | 65.60.020 | | Word Count Estimation | 20,289 | | Date of Issue | 2008-06-03 | | Date of Implementation | 2009-01-01 | | Older Standard (superseded by this standard) | GB/T 14225.1-1993; GB/T 14225.2-1993; GB/T 14225.3-1993 | | Quoted Standard | GB/T 699-1999; GB/T 1348-1998; GB/T 1593.1-1996; GB/T 1593.2-2003; GB/T 2828.1; GB/T 5667; GB/T 9440; GB/T 9480; GB 10395.1; GB 10396; GB/T 11352; GB/T 13306; JB/T 5673 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.9 (Total No.122) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the type and parameters of the plow, technical requirements, safety requirements, test methods, inspection rules, delivery, signs, packaging, storage and transportation. This standard applies to water traction tractor rated not less than 5kN supporting general purpose, field plow. Water for special purposes plow and tractor rated traction is less than 5kN supporting general purpose, field plow may refer to. | GB/T 14225-2008: Mould board plough---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Mouldboard plough
ICS 65.060.020
B91
National Standards of People's Republic of China
Replacing GB/T 14225.1 ~ 14225.3-1993
Plow
Posted 2008-06-03
2009-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is GB/T 14225.1-1993 "plow type and basic parameters", GB/T 14225.2-1993 "plow
Technical conditions "and GB/T 14225.3-1993" plow test method "merge revisions.
This standard and GB/T 14225.1-1993, GB/T 14225.2-1993, GB/T 14225.3-1993 compared to the main content changes
as follows.
--- The GB/T 14225.1-1993, GB/T 14225.2-1993, GB/T 14225.3-1993 merged into one standard;
--- Increased plows reversible plows when mass per meter working width in Table 4;
--- Increased security requirements and safety warning signs;
--- Increased use of the product specification requirements;
--- Increased shear bolt safety device;
--- Increased sampling and testing principles Batch eligibility determination;
--- The reliability assessment is incorporated technical requirements;
--- Fixed original formula (4);
--- Remove the calculation of the relevant technical and economic indicators;
--- Deleted the record form.
From the date of implementation of this standard instead of GB/T 14225.1-1993, GB/T 14225.2-1993, GB/T 14225.3-1993.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee of agricultural machinery.
This standard was drafted. Chinese Academy of Agricultural Mechanization Sciences, the State Quality Supervision and Inspection Center of farm machinery, agricultural machinery test Xinjiang
Inspection station identification, Shandong Tiansheng Machinery Manufacturing Co., Ltd.
The main drafters of this standard. Gower light Yangzhao Wen, Qi Huichang, Ma Huiling, reed springs.
This standard replaces the standard for the previous editions.
--- GB/T 14225.1-1993, GB/T 14225.2-1993, GB/T 14225.3-1993.
Plow
1 Scope
This standard specifies the types and parameters of the plow, technical requirements, safety requirements, test methods, inspection rules, delivery, marking, packaging, storage
Store and transport.
This standard applies to tractors traction rating of not less than 5kN supporting general purpose water, upland plow (hereinafter referred to as the plow).
Special-purpose plow (such as forestry, wetlands, grasslands, deep plowing, soil improvement and duplex operation with member plow) and rated traction
Tractor force is less than 5kN supporting general purpose water, dry land plow can be implemented by reference.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 699-1999 quality carbon structural steel
GB/T 1348-1988 ductile iron castings
GB/T 1593.1-1996 Part 1 Agricultural wheeled tractors Rear three-point hitch. 1,2,3 and 4 class
(Eqv ISO 730-1.1994)
GB/T 1593.2-2003 Agricultural wheeled tractors - Part 2 rear-mounted three-point hitch. 1N class (eqv ISO 730-1.
1994)
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(GB/T 2828.1-2003, ISO 2859-1.1999, IDT)
GB/T 5667 Test Method for the production of agricultural machinery
GB/T 9440 Malleable Iron Castings (GB/T 9440-1988, neq ISO 5922. 1981)
GB/T 9480 Tractors and machinery for agriculture and forestry, powered lawn and garden equipment - Operator 's manuals (GB/T 9480-
2001, eqv ISO 3600.1996)
GB 10395.1 Tractors and machinery for agriculture and forestry - Safety requirements - Part 1. General (GB 10395.1-2001,
eqv ISO 4254-1. 1989)
GB 10396 agricultural and forestry tractors and machinery, lawn and garden equipment - Safety signs and hazard pictorials - General principles (GB 10396-
2006, ISO 11684.1995, MOD)
GB/T 11352 Carbon steel castings for general engineering purposes (GB/T 11352-1989, neq ISO 3755. 1975)
GB/T 13306 signs
JB/T 5673 agricultural and forestry tractors and machinery paint general technical conditions
3 Types and basic parameters
Type 3.1
Plow and tractor connection type press can be divided into hanging, semi-mounted and trailed.
According to the structure and purpose can be divided into one-way plow, reversible plows and plow AM.
According to the conditions of use can be divided into paddy and upland plow plow.
3.2 Basic parameters
3.2.1 plow plow plow working width and the corresponding maximum depth shall comply with the requirements of Table 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14225-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 14225-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14225-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14225-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14225-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14225-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|