|
US$379.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14203-2016: General rules for spark discharge atomic emission spectrometry
Status: Valid GB/T 14203: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14203-2016 | English | 379 |
Add to Cart
|
4 days [Need to translate]
|
General rules for spark discharge atomic emission spectrometry
| Valid |
GB/T 14203-2016
|
| GB/T 14203-1993 | English | 519 |
Add to Cart
|
3 days [Need to translate]
|
General rule for photoelectric emission spectroscopic analysis of iron, steel and alloy
| Obsolete |
GB/T 14203-1993
|
PDF similar to GB/T 14203-2016
Basic data | Standard ID | GB/T 14203-2016 (GB/T14203-2016) | | Description (Translated English) | General rules for spark discharge atomic emission spectrometry | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H11 | | Classification of International Standard | 77.100 | | Word Count Estimation | 19,150 | | Date of Issue | 2016-02-24 | | Date of Implementation | 2016-11-01 | | Older Standard (superseded by this standard) | GB/T 14203-1993 | | Quoted Standard | GB/T 6379.1; GB/T 6379.6; GB/T 13962; GB/T 13966; GB/T 14666; GB/T 20066 | | Regulation (derived from) | National Standard Announcement No | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 14203-2016: General rules for spark discharge atomic emission spectrometry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General rules for spark discharge
ICS 77.080.01
H11
National Standards of People's Republic of China
Replacing GB/T 14203-1993
General rules for atomic emission spectrometric analysis of spark discharge
2016-02-24 released
2016-11-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
China National Standardization Management Committee released
Directory
Preface III
1 Scope 1
2 normative reference document 1
3 Terms and definitions 1
4 Principle 2
5 equipment 3
Material 5
7 Sample 5
8 sampling and sample preparation method 6
9 Setting of measurement conditions 6
Quantitative Analysis Method
11 Instrument selection and installation conditions 9
Accuracy (accuracy and precision)
Analysis error and monitoring
14 security protection 12
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 14203-1993 "General rules for photoelectric emission spectrometry of steel and alloy". And GB/T 14203-1993
In contrast, in addition to editorial changes outside the main technical content changes are as follows.
--- standard name to "spark discharge atomic emission spectrometry general rule";
--- the original "1 theme content and scope of application" to "1 Scope", and modify the contents of this chapter;
--- delete the original "2 general summary" section, and the contents into Chapter 1;
- Added "2 normative reference documents" section and content;
--- Added chapter and content of "3 terms and definitions";
--- to increase the "4 principle" chapter and content, delete the original "3.1 summary" in the description of the principle of the instrument;
--- "3", now "5 equipment", this chapter is divided into "5.1 instrument" and "5.2 subsidiary device" two sections, and the original "Figure 1 photoelectric hair
The composition of the spectrum analyzer "is replaced by a block diagram of the instrument." 5.1 Instrument "is divided into" 5.1.1 Excitation System "" 5.1.2 Optical
System "" 5.1.3 metering system "and" 5.1.4 control system "four, which the original" 3.1.1 light source generator "and" 3.1.2 light source of electricity
Pole part "is described in" 5.1.1 Excitation System "and the generator type of the original standard light source generator is deleted
Description and schematic diagram; the original "3.2.3 condenser device" and "3.2.4 splitter" in "5.1.2 optical system" to describe the original "3.2.5
Metering device "to" 5.1.3 metering system "," 5.1.3.1 photoelectric conversion detector "and" 5.1.3.2 data processing system "two
The "Air Supply Device", "Sampling Equipment", "Sampling Equipment" and "Small Sample Jig" are described in "5.2 Appendices"
content;
--- delete the original "4 sampling, sample preparation of appliances and machinery" chapter and content;
--- the original "5.2 control atmosphere of the gas" to "6.2 gas", an increase of argon purity requirements;
The original "7 sample preparation" to "8 sampling and sample preparation method", and modify the contents of this chapter;
The original "8 measurement operation and quantitative analysis method" is broken down into "9 measurement conditions set" and "10 quantitative analysis method" two chapters. 9th
Zhang Zhongyuan standard light indoor pressure "maintained at 2.67 × 105Pa below", to "meet the equipment requirements", and increased the inflatable
Light room requirements and description; Chapter 10 is divided into "the choice of analysis line" "internal standard selection" "line interference and calibration" "calibration"
Product analysis "" quantitative value of the representation method "five parts to describe;
--- the original "9 instrument selection and settings" to "11 instrument selection and installation conditions", and modify part of the content;
- the addition of the "12 Accuracy (accuracy and precision)" section describes the factors that cause the difference in accuracy;
--- "10", now "13", the "continuous repeat accuracy" to "short-term precision", "intermittent repeat accuracy" to "long-term precision"
And short-term precision and long-term precision of the provisions; delete the original standard "reproduction accuracy" of the content;
--- "11", now "14", increase the "gas use precautions" and "sample preparation precautions" related content.
This standard is proposed by China Iron and Steel Industry Association.
This standard is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183).
The drafting of this standard. Iron and Steel Research Institute, Wuhan Iron and Steel (Group) Company, Baosteel Group Co., Ltd., Anshan Iron and Steel Co., Ltd.
Su Xinghai Special Steel Co., Ltd., Steel Yankee Detection Technology Co., Ltd.
The main drafters of this standard. Jia Yunhai, Yang Jingwei, Luo Qianhua, Shen Ke, Wang Han, Yu Yuanjun.
This standard replaced the previous version of the standard release.
--- GB/T 14203-1993.
General rules for atomic emission spectrometric analysis of spark discharge
1 Scope
This standard specifies the terms and definitions of spark discharge atomic emission spectroscopy, principles, apparatus, materials, samples, sampling and sample preparation
Method, measurement conditions, quantitative analysis methods, instrument selection and installation conditions, accuracy, analysis error and monitoring, security protection.
This standard applies to the application of spark emission atomic emission spectrometry, research, personnel training and so on.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 6379.1 Accuracy of measurement methods and results (accuracy and precision) - Part 1. General and definitions
GB/T 6379.6 Accuracy of measurement methods and results (accuracy and precision) - Part 6. Practical application of accuracy values
GB/T 13962 terminology for optical instruments
GB/T 13966 terminology for analytical instruments
GB/T 14666 Chemical terminology for analysis
Sampling and sample preparation methods for the determination of chemical constituents of steels and iron GB/T
3 terms and definitions
GB/T 13962, GB/T 13966 and GB/T 14666 and the following terms and definitions apply to this document.
3.1
Sample electrode samplecathode
In the sample analysis, the analyzed sample is used as a cathode for the discharge pair, called the sample electrode.
3.2
On the electrode counterelectrode
In the discharge process, with the sample electrode is opposed to the high pressure of the anode part.
3.3
Spark discharge sparkdischarge
And a discontinuous discharge generated in the analysis gap formed between the sample electrode and the counter electrode. The discharge current is raised by the periodic charging capacitor
for. After the spark is ignited, the discharge is formed, and the voltage between the gaps is calculated from the starting capacitance in a shorter time than the spark duration
Pressure to low combustion voltage. Thus, compared to an arc, the spark can be considered essentially an intermittent arc with a high starting current (or peak
Current) and short duty cycle (burning time versus non-burning time ratio).
3.4
Pole gauge gauge
A gage for determining the distance between the electrode and the sample electrode.
3.5
Tracing profile
By adjusting the position of any optical component such as a collimator, an entrance slit, a grating, etc. in the optical system to obtain the optimum luminous intensity.
|