HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 14048.17-2008 English PDF

US$394.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14048.17-2008: Low-voltage switchgear and controlgear -- Part 5-4: Control circuit devices and switching elements -- Method of assessing the performance of low-energy contacts -- Special tests
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 14048.17-2008English394 Add to Cart 3 days [Need to translate] Low-voltage switchgear and controlgear -- Part 5-4: Control circuit devices and switching elements -- Method of assessing the performance of low-energy contacts -- Special tests Valid GB/T 14048.17-2008

PDF similar to GB/T 14048.17-2008


Standard similar to GB/T 14048.17-2008

GB/T 14048.4   GB 14536.11   GB 14536.15   GB/T 14048.9   GB/Z 14048.24   GB/T 14048.11   

Basic data

Standard ID GB/T 14048.17-2008 (GB/T14048.17-2008)
Description (Translated English) Low-voltage switchgear and controlgear -- Part 5-4: Control circuit devices and switching elements -- Method of assessing the performance of low-energy contacts -- Special tests
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K32
Classification of International Standard 29.130.20
Word Count Estimation 20,256
Date of Issue 2008-12-30
Date of Implementation 2009-10-01
Quoted Standard GB/T 2421-1999; GB/T 2423; GB/T 5080.6-1996; GB/T 14048.1-2006; GB/T 14048.5-2001; GB/T 15969.2-2008
Adopted Standard IEC 60947-5-4-2002, IDT
Regulation (derived from) Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard applies to the considered use categories used independent contacts, such as a control circuit switching elements. This section considers the case of two of the rated voltage: a) possible contacts for switching loads with galvanic corrosion, such as a programmable controller input, rated voltage is greater than or equal to 10V (typically 24V), b) electric negligible corrosion conditions, such as electronic circuits, the rated voltage is less than 10V (typically 5V). This section does not apply to measure very small capacity used contacts, such as sensors or thermocouples system. The purpose of this section is to identify a small-capacity contact performance evaluation methods, gives the following information: Definition, general principles of the test method, the test is used to monitor and record the action contacts in each operation,

GB/T 14048.17-2008: Low-voltage switchgear and controlgear -- Part 5-4: Control circuit devices and switching elements -- Method of assessing the performance of low-energy contacts -- Special tests



---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Low-voltage switchgear and controlgear Part 5-4. Control circuit devices and switching elements Methord of assessing the performance of low-energy contacts Special tests.. ICS 29.130.20 K32 National Standards of People's Republic of China GB/T 14048.17-2008/IEC 60947-5-4.2002 Low-voltage switchgear and control equipment - Part 5-4. Control circuit devices and switching elements of small capacity Evaluating the performance of contacts - Special tests (IEC 60947-5-4.2002, IDT) Posted 2008-12-30 2009-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope and purpose 1 2 Normative references 1 3 Terms and definitions, symbols 1 4 Fundamentals 4 5 5 General test methods 6 General characteristics 5 Characterization of defects 7 9 9 8 environmental conditions 9 Report 10 10 test report provides information 12 Appendix A (normative) information provided by the manufacturer 13 References 15 GB/T 14048.17-2008/IEC 60947-5-4.2002

Foreword

"Low-voltage switchgear and control equipment" currently consists of the following 18 sections. --- GB 14048.1 low-voltage switchgear and control equipment Part 1. General; --- GB 14048.2 low-voltage switchgear and control equipment Part 2. Circuit Breaker; --- GB 14048.3 low-voltage switchgear and control equipment - Part 3. Switches, disconnectors, switch and fuse combination Appliances; --- GB 14048.4 low-voltage switchgear and control equipment, electromechanical contactors and motor starters; --- GB 14048.5 low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching elements - Electromechanical control Electrical circuit; --- GB 14048.6 low-voltage switchgear and control equipment Part 4-2. Contactors and motor starters - AC semiconductor Motor controllers and starters (including soft starter); --- GB/T 14048.7 low-voltage switchgear and control equipment Auxiliary equipment Section 1. Terminal blocks for copper conductors; --- GB/T 14048.8 low-voltage switchgear and control equipment Ancillary equipment Section 2. Protective conductor terminal blocks for copper conductors Sub-row; --- GB 14048.9 low-voltage switchgear and control equipment Part 6-2. Multiple function equipment (equipment) control and protection switch Electric (equipment) (CPS); --- GB/T 14048.10 Low-voltage switchgear and control equipment, control circuit devices and switching elements - Part 2. close switch; --- GB/T 14048.11 voltage switchgear and control equipment Part 6. Multiple function equipment - Section 1. Automatic transfer switch Appliances; --- GB/T 14048.12 voltage switchgear and control equipment Part 4-3. Contactors and motor starters, non-powered LOADED AC semiconductor controllers and contactors; --- GB/T 14048.13 voltage switchgear and control equipment Part 5-3. Control circuit devices and switching elements in it Proximity Switch (PDF) required to have under fault conditions to determine the function; --- GB/T 14048.14 voltage switchgear and control equipment Part 5-5. Control circuit devices and switching elements having Mechanical latching function electrical emergency braking device; --- GB/T 14048.15 voltage switchgear and control equipment Part 5-6. Control circuit devices and switching elements proximity Sensors and switching amplifiers DC Interface (NAMUR); --- GB/T 14048.16 voltage switchgear and control equipment - Part 8. rotary motor control with built - in thermal protection (PTC) Unit; --- GB/T 14048.17 voltage switchgear and control equipment Part 5-4. Control circuit devices and switching elements of small capacity Special tests evaluating the performance of the amount of contact; --- GB/T 14048.18 voltage switchgear and control equipment Part 7-3. Ancillary fuse terminal blocks Safety requirements. This part is the "low-voltage switchgear and control equipment" in Section 17. This section identical with IEC 60947-5-4.2002 "low-voltage switchgear and control equipment Part 5-4. Control circuit devices and open Small-capacity switching element contacts assessing the performance of special test "(in English). This section of Appendix A normative appendix. This part is proposed by the China Electrical Equipment Industrial Association. GB/T 14048.17-2008/IEC 60947-5-4.2002 The low-voltage electrical part by the National Standardization Technical Committee (SAC/TC189) centralized. This section is responsible for drafting unit. Shanghai Electrical Apparatus Research Institute (Group) Co., Ltd. The main drafters of this section. Li Hui, Daniel. This section first release. GB/T 14048.17-2008/IEC 60947-5-4.2002 Low-voltage switchgear and control equipment - Part 5-4. Control circuit devices and switching elements of small capacity Evaluating the performance of contacts - Special tests

1 Scope and purpose

This section applies to independent contacts using categories under consideration for use as a control circuit switching elements. This section considers the rated voltage are two cases. a) possible contacts for switching loads with electro-erosion, such as a programmable controller input, rated voltage is greater than or equal to 10V (Typically 24V); b) negligible electric corrosion situations, such as electronic circuits, the rated voltage is less than 10V (typically 5V). This section does not apply to a very small capacity measurements used contacts, such as sensors or thermocouple system. The purpose of this section is to identify a small-capacity contact performance assessment methods, give the following information. ---definition; General principles --- test method, the test is used to monitor and record each operation contact action; --- Conventional test equipment defined functional basis; --- Test preferred value; --- Specific occasion (such as a PC input switching) the special contact with the test conditions; --- Test report the information to be given; Explanations and justifications --- test results.

2 Normative references

The following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this section, however, encourage the parties to this part of the research agreement Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2421-1999 Environmental testing for electric and electronic products - Part 1. General (idt IEC 60068-1. 1988) GB/T 2423 (all parts), Environmental testing for electric and electronic products Part 2. Test methods (IEC 60068-2 (all parts)) GB/T 5080.6-1996 Equipment reliability testing constant failure rate assumption validation (idt IEC 60605-6. 1989) GB 14048.1-2006 Low-voltage switchgear and control equipment Part 1. General (IEC 60947-1.2001, MOD) GB 14048.5-2001 Low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching elements - Electromechanical Control circuit devices (eqv IEC 60947-5-1.1997) GB/T 15969.2-2008 Programmable Controllers Part 2. Equipment requirements and tests (IEC 61131-2.2007, IDT) 3 Terms and definitions, symbols 3.1 Terms and Definitions The following terms and definitions apply to this section. In this section, as applicable, the term "time interval" can be expressed as "operating cycles." 3.1.1 Note 1. generally assumed as a starting point in the time interval, the product is in a state to perform a required function. GB/T 14048.17-2008/IEC 60947-5-4.2002

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14048.17-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14048.17-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14048.17-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14048.17-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.