HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 14041.3-2010 English PDF

US$254.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14041.3-2010: Hydraulic fluid power -- Filter elements -- Part 3: Verification of collapse/burst pressure rating
Status: Valid

GB/T 14041.3: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 14041.3-2010English254 Add to Cart 3 days [Need to translate] Hydraulic fluid power -- Filter elements -- Part 3: Verification of collapse/burst pressure rating Valid GB/T 14041.3-2010
GB/T 14041.3-1993English199 Add to Cart 2 days [Need to translate] Hydraulic fluid power. Filter elements. Verification of collapse/burst resistance Obsolete GB/T 14041.3-1993

PDF similar to GB/T 14041.3-2010


Standard similar to GB/T 14041.3-2010

GB/T 14034.1   GB/T 14041.4   GB/T 13871.5   GB/T 14034.3   GB/T 14034.2   

Basic data

Standard ID GB/T 14041.3-2010 (GB/T14041.3-2010)
Description (Translated English) Hydraulic fluid power -- Filter elements -- Part 3: Verification of collapse/burst pressure rating
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J20
Classification of International Standard 23.100.60
Word Count Estimation 13,188
Date of Issue 2011-01-14
Date of Implementation 2011-10-01
Older Standard (superseded by this standard) GB/T 14041.3-1993
Quoted Standard ISO 1219-1; ISO 2942; ISO 2943; ISO 5598; ISO 12103-1
Adopted Standard ISO 2941-2009, IDT
Regulation (derived from) National Standard Approval Announcement 2011 No.2
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies a hydraulic filter Compressive (rupture) test method characteristics. To determine the ability to withstand the specified pressure drop of the filter in the normal flow (specified flow). By continuously injected into the system so that the filter pressure drop test powder rising until the filter appears crush (rupture) or not crush (rupture) and a large drop so far to reach a predetermined level.

GB/T 14041.3-2010: Hydraulic fluid power -- Filter elements -- Part 3: Verification of collapse/burst pressure rating


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hydraulic fluid power.Filter elements.Part 3. Verification of collapse/burst pressure rating ICS 23.100.60 J20 National Standards of People's Republic of China Replacing GB/T 14041.3-1993 Hydraulic filter Part 3. Compressive (rupture) characteristic test methods Part 3. Verificationofcolapse/burstpressurerating (ISO 2941.2009, Hydraulicfluidpower-Filterelements- Verificationofcolapse/burstpressurerating, IDT) Issued on. 2011-01-14 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 14041 "Hydraulic filters" is divided into the following four parts. --- Part 1. Determine the structural integrity and verify the initial bubble point; --- Part 2. Material compatibility with fluids test methods; --- Part 3. Compressive (rupture) characteristic test methods; --- Part 4. Method for end load test. This section GB/T 14041 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 14041.3-1993 "hydraulic filter resistance to cracking test methods", compared with the GB/T 14041.3-1993, The main technical changes are as follows. --- Changed the name of the standard; --- Increase pollutants addition method; --- Increasing the viscosity of oil detection and test requirements; --- More explicit provisions test equipment; --- Flow test is not required for the nominal flow rate. This section uses the translation method identical with ISO 2941.2009 "Hydraulic filter Compressive (rupture) Characteristics of verification" (In English). This part of ISO 2941.2009 the same technical content. Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 786.1-2009 fluid power systems and components - Graphic symbols and circuit diagram - Part 1. General purpose for several According graphics symbols (ISO 1219-1.2006, IDT); Determine the structural integrity and verify the initial bubble point. --- GB/T 14041.1-2007 hydraulic filters - Part 1 (ISO 2942.2004, IDT); --- GB/T 14041.2-2007 hydraulic filters - Part 2. Material compatibility with fluids test methods (ISO 2943.1998, IDT); --- GB/T 17446-1998 fluid power systems and components term (idtISO 5598. 1985). For ease of use, this section made the following editorial changes. --- Consistent with the existing standard series, the standard name will be changed to "hydraulic filters - Part 3. Compressive (rupture) characteristic test side law"; --- Remove Table 1 drop unit bar, leaving only the Pa and kPa; --- Use footnotes in the form of Table 1 "flow injection" and "injection system volume," explained. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee of hydraulic and pneumatic (SAC/TC3) centralized. This section drafted by. China Shipbuilding Industry Corporation seventh Research Institute of Jiujiang ○ seven divisions, Xinxiang City-Philippines Filter Co., Dawn Hydraulic Company, Guangzhou Mechanical Engineering Research Institute. The main drafters of this section. Liu Yong, Liu Hua party, high security hospital, Wang Peipei, send Lu in Ye Ping, ZHENG Yuan, Min and new. This part of the standard replaces the previous editions are. --- GB/T 14041.3-1993.

Introduction

In the hydraulic drive system, the power is through a closed loop pressurized liquid to pass and control. Filter by filtering insoluble particulate pollutants to control the degree of contamination of the liquid. From the actual filter is a porous filtration element. The ability to filter oil pollution maintain specified levels of performance and not only its structural integrity, but also on its resist depends on unsteady Conditions (such as cold or sudden relief) capabilities. Compressive filter (rupture) feature can be used to evaluate its resist these adverse conditions Movies Sound capabilities. Hydraulic filter Part 3. Compressive (rupture) characteristic test methods

1 Scope

This section GB/T 14041 specifies the test method for hydraulic filter Compressive (rupture) feature to determine the filter element in the normal stream Fixed (specified flow) ability to withstand under specified pressure drop. By continuously injected into the system so that the filter pressure drop test dust rising, straight To filter appears crushed (burst) or not crushed (burst) and reaches a predetermined maximum voltage drop so far.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 1219-1 Fluid power systems and components - Graphic symbols and circuit diagram - Part 1. for general use and data processing should be Graphic symbols (Fluidpowersystemsandcomponents-Graphicsymbolsandcircuitdiagrams-Part 1 used. Graphicsymbolsforconventionaluseanddata-processingapplications) ISO 2942 Hydraulic fluid power filter and verify the structural integrity of the initial bubble point determination (Hydraulicfluidpower- Filterelements-Verificationoffabricationintegrityanddeterminationofthefirstbubblepoint) ISO 2943 Hydraulic filter material compatibility with fluid test (Hydraulicfluidpower-Filterelements- Verificationofmaterialcompatibilitywithfluids) ISO 5598 Fluid power systems and components glossary (Fluidpowersystemsandcomponents-Vocabulary) ISO 12103-1 Road vehicles - powder filter performance test - Part 1. Arizona test dust (Roadvehicles- Testdustforfilterevaluation-Part 1. Arizonatestdust)

3 Terms and Definitions

Terms and definitions established in ISO 5598 are applicable to this document. 4 graphic symbols and system of FIG. This section of the graphical symbol of compliance with ISO 1219-1.

5 Test circuit and equipment

5.1 Test circuit Figure 1 shows in Chapter 6 conducted Compressive (rupture) of a typical characteristic test circuit.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14041.3-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14041.3-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14041.3-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14041.3-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14041.3-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14041.3-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.