|
US$1659.00 · In stock
Delivery: <= 9 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14034.3-2024: Connections for hydraulic fluid power - Metallic tube connections - Part 3: Face seal
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14034.3-2024 | English | 1659 |
Add to Cart
|
9 days [Need to translate]
|
Connections for hydraulic fluid power - Metallic tube connections - Part 3: Face seal
| Valid |
GB/T 14034.3-2024
|
PDF similar to GB/T 14034.3-2024
Basic data | Standard ID | GB/T 14034.3-2024 (GB/T14034.3-2024) | | Description (Translated English) | Connections for hydraulic fluid power - Metallic tube connections - Part 3: Face seal | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J20 | | Classification of International Standard | 23.100.40 | | Word Count Estimation | 82,893 | | Date of Issue | 2024-06-29 | | Date of Implementation | 2024-06-29 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 14034.3-2024: Connections for hydraulic fluid power - Metallic tube connections - Part 3: Face seal
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 23.100.40
CCSJ20
National Standards of People's Republic of China
Hydraulic transmission connection metal pipe joint
Part 3.End seals
Part 3.Faceseal
Released on 2024-06-29
2024-06-29 implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction V
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Materials 2
5 Pressure and temperature requirements 3
6 Pipe fitting nomenclature 3
7 Metal pipe 5
8 Width across flats and tolerance 6
9 Design 7
10 Thread 7
11 Manufacturing 7
12 Assembly Guide 8
13 Purchasing Information 8
14 Marks 9
15 Performance requirements and qualification tests 9
16 Notes (reference this document) 11
Appendix A (Informative) Connection of O-ring face seal ends to metric/imperial metal pipes or swivel hose connectors 51
Appendix B (Informative) Typical Connections of O-Ring Face Seal Pipe Fittings 52
Appendix C (Normative) 1-14 UNS Unified Thread Specification Basic Dimensions 55
Appendix D (Normative) Formed Metal Pipe Connections with O-Ring Face Seal Pipe Fittings (for Unified Threads Only) 56
Appendix E (Normative) Length reduction of reducer pipe joints 58
Appendix F (Informative) Instructions for assembling stud-end adjustable pipe fittings in GB/T 2878.1 oil ports 70
References 72
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is part 3 of GB/T 14034 "Metallic pipe fittings for hydraulic transmission connections". GB/T 14034 has been published as follows
part.
--- Part 1.24° cone;
--- Part 2.37° flared type;
--- Part 3.End seals;
--- Part 4.60° cone.
This document is modified to adopt ISO 8434-3.2005 "Metallic pipe connections for fluid power and general use - Part 3.O-ring face seal pipes
Connector.
This document has the following structural adjustments compared to ISO 8434-3.2005.
---15.1 corresponds to 15.1.1 in ISO 8434-3.2005, 15.2.1~15.2.7 correspond to 15.1.2~15.2.7 in ISO 8434-3.2005
15.1.7, 15.2;
--- Figures 3 to 17 correspond to Figures 2 to 16 in ISO 8434-3.2005;
--- Table 3 to Table 23 correspond to Table 2 to Table 22 in ISO 8434-3.2005;
--- Appendix A corresponds to Appendix D of ISO 8434-3.2005;
--- Appendix B corresponds to Appendix E of ISO 8434-3.2005;
--- Appendix C corresponds to Appendix A of ISO 8434-3.2005;
--- Appendix D corresponds to Appendix C of ISO 8434-3.2005;
--- Appendix E corresponds to Appendix B of ISO 8434-3.2005.
The technical differences between this document and ISO 8434-3.2005 and their reasons are as follows.
--- Changed the nominal outer diameter of the metal pipe or the inner diameter of the hose applicable to the end seal pipe joint, and added the corresponding specification in the text.
50mm (see Chapter 1, Table 1, Table 3, Table 5~Table 7, Table 10~Table 18, Table 21~Table 23) to adapt to my country's technical conditions
Improve operability;
--- Changed the terms and definitions (see Chapter 3, Chapter 3 of ISO 8434-3.2005) to adapt to the technical conditions of my country;
--- The normative reference GB/T 17446 replaces ISO 5598, GB/T 14034.1 replaces ISO 8434-1, GB/T 14034.2
Replaced ISO 8434-2 (see Chapter 3) to adapt to my country's technical conditions and improve operability;
--- ISO 3601-3 (see 4.4) has been replaced by the normative reference GB/T 3452.2 to adapt to my country's technical conditions and improve operability.
Sex;
--- Added the naming method when the end face seal end is a common thread (see Chapter 6) to adapt to my country's technical conditions and improve operability
Sex;
--- Deleted the normative references to ISO 3304 and ISO 3305 (7.3 of ISO 8434-3.2005) to adapt to my country's technical requirements
Improve operability;
--- Added normative reference GB/T 3639 (see 7.3) to adapt to my country's technical conditions and improve operability;
--- ISO 4759-1 (see 8.2) has been replaced by the normative reference GB/T 3103.1 to adapt to my country's technical conditions and improve operability.
Sex;
--- Added the requirements for the side dimensions (see 8.2) to adapt to my country's technical conditions and improve operability;
--- ISO 6149-2 (see 9.6) has been replaced by the normative reference GB/T 2878.2 to adapt to my country's technical conditions and improve operability.
Sex;
--- ISO 263 (see 10.1) has been replaced by the normative reference GB/T 20670 to adapt to my country's technical conditions and improve operability.
Sex;
--- Added the requirements for ordinary threads in the O-ring end seal (see 10.1) to adapt to my country's technical conditions and improve operability
Sex;
--- ISO 261 (see 10.1, 10.2) has been replaced by the normative reference GB/T 193 to adapt to my country's technical conditions and improve operability.
Sex;
--- ISO 9227 (see 11.3) has been replaced by the normative reference GB/T 10125 to adapt to my country's technical conditions and improve operability.
Sex;
--- Changed the requirements for purchasers in "Purchase Information" (see Chapter 13) to adapt to my country's technical conditions and improve operability;
--- Replaced ISO 19879 (see Chapter 15) with the normative reference GB/T 26143 to adapt to my country's technical conditions and improve
Operability;
--- The pressure requirements that the pipe joints should meet have been added to the performance requirements (see 15.1) to adapt to my country's technical conditions and improve operability.
Sex;
--- The specifications of common threads and the corresponding dimensions and data (see Table 6, Table 7 and Table 10~Table 18, etc.) are added to the end face sealing end.
Adapt to the technical conditions of our country;
--- The normative reference GB/T 20666 replaced ISO 5864, and GB/T 20669 replaced ISO 68-2 (see Table 7, Table 10,
Table 12~Table 15, Table 21~Table 23) to adapt to my country's technical conditions and improve operability;
--- Added normative references to GB/T 197 (see Table 7, Table 10, Table 12~Table 15, Table 21~Table 23) to adapt to my country's technical
Technical conditions to improve operability;
---Change "Chamfer maximum 1mm" to "Chamfer maximum 0.5mm" (see Figure 6);
--- Added "g) Bulkhead joint assembly diagram" (see Figure 8) to improve operability;
--- Added the corresponding diameter reduction when the end face sealing end is a common thread and some standard end processing specifications (see Table E.1~
Table E.5) to adapt to my country's technical conditions and improve operability.
The following editorial changes were made to this document.
--- In order to coordinate with the existing standards, the name of the standard is changed to "Metallic pipe fittings for hydraulic transmission connections Part 3.End seals";
--- Replaced ISO 6149-1 with the informative reference GB/T 2878.1;
--- Replaced ISO 12151-1 with the informative reference GB/T 9065.1;
---Adjusted the footnotes of some tables;
---Added references.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Machinery Industry Federation.
This document is under the jurisdiction of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3).
This document was drafted by. Beijing Institute of Automation of Mechanical Industry Co., Ltd., Hefei Xieli Hydraulic Technology Co., Ltd., Guangzhou Weihuajie
Energy Equipment Co., Ltd., Ningbo Jiurong Hydraulic Equipment Co., Ltd., Zhejiang Santian Automobile Air Conditioning Compressor Co., Ltd., Jiangsu Yaokun Hydraulic Co., Ltd.
Co., Ltd., Danfoss Power Systems (Ningbo) Co., Ltd., Jiangyin Hongteng Machinery Co., Ltd., Qingdao Zhangshi Shangjia Technology Co., Ltd., Heng
Shuihongyun Filter Press Co., Ltd., Zhejiang Songqiao Pneumatic and Hydraulic Co., Ltd., Dongguan Temuyou Transmission Technology Co., Ltd., Beijing Tianze Electric Power
Group Co., Ltd., Shenzhen Jianxin Hardware Co., Ltd., China Machinery Engineering Institute Group Haixi (Fujian) Branch Co., Ltd., Hebei Zhongmei Special
Rubber Co., Ltd., Hebei Youlu Fluid Technology Co., Ltd., Shenzhen Hengyongda Technology Co., Ltd., Harbin Dongan Industrial Development Co., Ltd.
Co., Ltd., Guotai Daming Precision Technology Group Co., Ltd., and Jiaxing Feili Fluid Technology Co., Ltd.
The main drafters of this document are. Cao Qiaohui, Chen Ke, Zhou Feng, Zhang Guoqing, Yu Jijian, Lin Jian, Zhang Yong, Chen Wanyong, Zhang Wei, Cui Hongliang, Lou Zhongyu,
Zhong Hanwan, Huang Guihong, Zhao Hongfeng, Liu Wenzhi, Li Yang, Zhang Bo, Li Zengyi, Zhong Zhigang, Zhu Yingnan, Zeng Weihong, Li Jiabo.
Introduction
GB/T 14034 aims to standardize the technical requirements of metal pipe joints for hydraulic transmission connections and consists of four parts.
--- Part 1.24° cone. The purpose is to determine the general design requirements for 24° cone pipe fittings using ferrules or O-ring seals.
Requirements, basic dimensions, performance requirements and qualification tests.
--- Part 2.37° flared type. The purpose is to determine the 37° flared type pipe fittings suitable for metal pipes with an outer diameter of 6 mm to 50.8 mm.
General design requirements, basic dimensions, performance requirements and qualification tests for head design.
--- Part 3.End seals. The purpose is to determine the general design requirements, basic dimensions, performance requirements and
and qualification test.
--- Part 4.60° cone. The purpose is to determine the application of metal pipes with an outer diameter of 6mm~50mm or an inner diameter of 5mm~
General design requirements, basic dimensions, performance requirements and qualification tests for 60° tapered pipe fittings for 51mm hose.
Hydraulic transmission connection metal pipe joint
Part 3.End seals
1 Scope
This document specifies the general design requirements, basic dimensions and performance requirements for steel O-ring face seal pipe fittings, as well as the
This type of pipe joint is suitable for metal pipes with a nominal outer diameter of 6mm~50mm or a nominal inner diameter of 6.3mm~51mm.
End-face sealing pipe joints are suitable for fluid transmission and
General applications.
The pipe joints specified in this document are suitable for transition connection between metal pipes or hose joints and oil ports that comply with GB/T 2878.1 (related
For the specifications of hose connectors, see GB/T 9065.1).
Note 1.For use outside the specified pressure and temperature ranges, see 5.3.
Note 2.Metric threaded face seals and metric metal pipes are preferred. For unified threaded face seals, both metric and imperial pipes are applicable (see Appendix A).
The casing needs to be changed.
Note 3.This type of pipe fitting operates at an absolute vacuum pressure of 6.5 kPa to the working pressure given in Table 1 to achieve full flow connection.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 193 Common thread diameter and pitch series (GB/T 193-2003, ISO 261.1998, MOD)
GB/T 197 General thread tolerances (GB/T 197-2018, ISO 965-1.2013, MOD)
GB/T 2878.2 Hydraulic transmission connections - Ports and stud ends with metric threads and O-ring seals - Part 2.Heavy duty studs
Terminal (S series) (GB/T 2878.2-2011, ISO 6149-2.2006, MOD)
GB/T 3103.1 Fastener tolerances Bolts, screws, studs and nuts (GB/T 3103.1-2002, ISO 4759-1.2000,
IDT)
GB/T 3452.2 O-rings and rubber seals for hydraulic and pneumatic applications Part 2.Appearance quality inspection specification (GB/T 3452.2-
2007,ISO 3601-3.2005,IDT)
GB/T 3639 Cold drawn or cold rolled precision seamless steel tube (GB/T 3639-2009, EN10305-1.2002, MOD)
GB/T 10125 Artificial atmosphere corrosion test Salt spray test (GB/T 10125-2021, ISO 9227.2017, MOD)
GB/T 14034.1 Metal pipe fittings for hydraulic transmission Part 1.24° cone (GB/T 14034.1-2023,
ISO 8434-1.2018, MOD)
GB/T 14034.2 Metal pipe fittings for hydraulic transmission Part 2.37° flared type (GB/T 14034.2-2023,
ISO 8434-2.2007, MOD)
GB/T 17446 Fluid power systems and components vocabulary (GB/T 17446-2024, ISO 5598.2020, MOD)
GB/T 20666 Unified thread tolerances (GB/T 20666-2006, ISO 5864.1993, MOD)
GB/T 20669 Unified thread profile (GB/T 20669-2006, ISO 68-2.1998, MOD)
GB/T 20670 Unified thread diameter and number of threads series (GB/T 20670-2006, ISO 263.1973, MOD)
GB/T 26143 Test methods for hydraulic pipe joints (GB/T 26143-2010, ISO 19879.2010, IDT)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14034.3-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 14034.3-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 9 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14034.3-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14034.3-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|