HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 14038-2008 English PDF

US$314.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14038-2008: Pneumatic fluid power -- Connections -- Ports and stud ends
Status: Valid

GB/T 14038: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 14038-2008	English	314	Add to Cart	3 days [Need to translate]	Pneumatic fluid power -- Connections -- Ports and stud ends	Valid	GB/T 14038-2008
GB/T 14038-1993	English	199	Add to Cart	2 days [Need to translate]	Pneumatic fluid power. Cylinders. Bore and port thread sizes	Obsolete	GB/T 14038-1993

PDF similar to GB/T 14038-2008

Standard similar to GB/T 14038-2008

GB/T 14034.1 GB/T 14041.4 GB/T 13871.5 GB/T 14034.3 GB/T 14034.2

Basic data

Standard ID	GB/T 14038-2008 (GB/T14038-2008)
Description (Translated English)	Pneumatic fluid power -- Connections -- Ports and stud ends
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	J20
Classification of International Standard	23.100.40
Word Count Estimation	16,174
Date of Issue	2008-06-25
Date of Implementation	2009-01-01
Older Standard (superseded by this standard)	GB/T 14038-1993
Quoted Standard	GB/T 193; GB/T 3141; GB/T 7307; GB/T 17446; ISO 8778
Adopted Standard	ISO 16030-2001 Amd.1-2005, IDT
Regulation (derived from)	National Standard Approval Announcement 2008 No.10 (Total No.123)
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies the size and performance requirements of the air inlet and stud ends with the pneumatic drive cylinder threads. This standard provides for self -90kPa ~ 1. 6MPa pressure within the range of leak proof connection reusable, seals effectively holding pressure. This standard applies to the threaded inlet and stud ends in pneumatic transmission in the new design.

GB/T 14038-2008: Pneumatic fluid power -- Connections -- Ports and stud ends

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pneumatic fluid power. Connections. Ports and stud ends ICS 23.100.40 J20 National Standards of People's Republic of China Replacing GB/T 14038-1993 Pneumatic connection Ports and stud ends (ISO 16030.2001/Amd.1.2005, IDT) Posted 2008-06-25 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 1 size requirements 5 Performance Requirements 1 6 Test Method 3 7 Marking 6 8 Marking explanation (to cite this standard) 6 (Informative) Examples of methods sealed Appendix A 7 Center Appendix B (Informative Appendix) GB/T 14038 8 from the intake port Appendix NA (informative) thread series 11

Foreword

This standard is identical with ISO 16030.2001/Amd. 1.2005 "Pneumatic connection Ports and stud ends" (in English). For ease of use, this standard to make editorial changes as follows. --- In the "normative references", the required GB/T 1.1-2000 prepared to correspond to national standards instead of international standards Standards, and the use of reference are not dated; --- Added "Appendix NA (informative) thread series"; --- Remove the "References." This standard replaces GB/T 14038-1993 "cylinder intake port thread." This standard and GB/T 14038-1993 has compared the following differences. --- The standard name is changed. --- Original standard air intake provides thread series; in this standard in addition to the small size of the air inlet selection M3, M5, M7 common thread, its I choose G1/8 ~ G255 ° non-sealing pipe thread. --- Original standard applies only to cylinders Air inlet thread; This standard applies to all, including pneumatic components including a cylinder. --- Original standard only defines the inlet thread series; this standard increased the inlet end of the stud and performance requirements and test methods. This standard Annex A, Annex B, Appendix NA informative appendices. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of hydraulic and pneumatic (SAC/TC3) centralized. This standard was drafted. Shanghai Xinyi pneumatic Engineering Co., Ltd., Wuxi Institute of Technology Pneumatic Co., Ltd., Ningbo Guy Reiki motivation Mechanical Co., Ltd. Shanghai Camozzi pneumatic control components. The main drafters of this standard. Majoring enterprises Lee Fang, Yang Sui Ran, single Junbo, Fang Fu years. This standard replaces the standards previously issued as follows. --- GB/T 14038-1993.

Introduction

In the pneumatic system, the power is through a closed loop control and compressed air to pass. Each pneumatic components, mainly through the air inlet threaded stud and with the aid end fittings, to take over other types of pipe fittings to connect to each other. Air intake is Each pressure transmission element such as a necessary part of air source treatment unit, valves, pneumatic cylinders and other accessories and so on. Pneumatic connection Ports and stud ends

1 Scope

This standard specifies the dimensions and performance requirements Ports and stud ends with a pneumatic drive cylinder threads. The standard provides for self -90kPa ~ 1.6MPa pressure within the range of leak-proof connection of the reusable, efficient packing secret Sealing device. This standard applies to the threaded inlet and stud ends in pneumatic drive in the new design.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 193 series ordinary thread diameter and pitch (GB/T 193-2003, ISO 261.1998, MOD) GB/T 3141 Industrial liquid lubricants - ISO viscosity classification (GB/T 3141-1994, eqv ISO 3348.1992) GB/T 7307 55 ° non-sealing pipe thread (GB/T 7307-2001, eqv ISO 228-1.1994) GB/T 17446 Fluid power systems and components Terminology (GB/T 17446-1998, idt ISO 5598. 1985) Pneumatic ISO 8778 standard reference atmosphere

3 Terms and Definitions

Terms and definitions GB/T 17446 apply to this standard established.

4 size requirements

4.1 air intake dimensions should comply with Figure 1 and Table 1. 4.2 stud end dimensions shall comply with Figure 2 and Table 2. Sealing means is an integral part of the stud end. Examples are shown in type seal Appendix A. Centerline distance between the air intake in Appendix B. NOTE. In some of the old products, the distance between the centerline of the intake port in Appendix NA.

5 Performance Requirements

Rated pressure range 5.1 Air intake, stud ends and sealing devices shall be designed and used in a -90kPa ~ 1.6MPa rated pressure range, unless air Manufacture material mouth, stud end and the sealing means so required, by the manufacturer separately. Its importance is to ensure there is enough surrounding gas port entity to maintain the pressure. 5.2 rated temperature range Air intake, stud ends and seals should be designed and used within the rated temperature range of -20 ℃ ~ + 80 ℃, except for air intake, Manufacturing materials stud end and sealing means so required, by the manufacturer separately. 5.3 Performance Verification Air intake, stud ends and seals shall comply with all requirements set forth in Chapter 6 of. 5.4 sealing means Sealing means should be effective in packing, reusable and can withstand long-term work.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14038-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14038-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14038-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14038-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14038-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14038-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.