|
US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13342-2007: Specification for marine reciprocating hydraulic cylinder
Status: Valid GB/T 13342: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13342-2007 | English | 369 |
Add to Cart
|
3 days [Need to translate]
|
Specification for marine reciprocating hydraulic cylinder
| Valid |
GB/T 13342-2007
|
| GB/T 13342-1992 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
General specification of reciprocating hydraulic cylinder for ship
| Obsolete |
GB/T 13342-1992
|
PDF similar to GB/T 13342-2007
Basic data | Standard ID | GB/T 13342-2007 (GB/T13342-2007) | | Description (Translated English) | Specification for marine reciprocating hydraulic cylinder | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U57 | | Classification of International Standard | 47.020.30 | | Word Count Estimation | 14,199 | | Date of Issue | 2007-07-17 | | Date of Implementation | 2008-01-01 | | Older Standard (superseded by this standard) | GB/T 13342-1992 | | Quoted Standard | GB/T 699-1999; GB/T 786.1; GB/T 2879; GB/T 2880; GB/T 3098.1-2000; GB/T 3323-2005; GB/T 3452.1; GB/T 3452.2; GB/T 3452.3; GB/T 5777; GB/T 6402-1991; GB/T 6577; GB/T 6578; GB/T 7935; GB/T 8162-1999; GB/T 8163-1999; GB/T 14039-2002; GB/T 17446; CB/T 3004; CB/T 3317; CB/T 3318; JB/T 4730.3-2005; JB/T 7858 | | Regulation (derived from) | China National Standard Announcement 2007 No.7 (Total No.107) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the marine reciprocating hydraulic cylinder (hereinafter referred to as the hydraulic cylinder) requirements, test methods, inspection rules, logo and packaging. This standard applies to mineral -based hydraulic oil as the medium of the hydraulic cylinder design, manufacturing, testing and acceptance. | GB/T 13342-2007: Specification for marine reciprocating hydraulic cylinder---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for marine reciprocating hydraulic cylinder
ICS 47.020.30
U57
National Standards of People's Republic of China
Replacing GB/T 13342-1992
Marine reciprocating hydraulic cylinder General technical conditions
Posted 2007-07-17
2008-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 13342-1992 "marine cylinder reciprocating General technical conditions."
This standard compared with GB/T 13342-1992, there are the following changes.
--- Increasing the terms and definitions;
--- Ambient temperature from 5 ℃ to 65 ℃;
--- Cancel the tilt, swing, vibration and shock requirements;
--- Respectively provide the ram cylinder and double acting hydraulic cylinder piston minimum threshold pressure;
--- Reducing internal leakage and external leakage;
--- Respectively provide a double-acting hydraulic cylinder and piston cylinder durability;
--- Lowest steady speed respectively, by 8mm/s, 10mm/s increased to 4mm/s, 5mm/s;
--- Increased piston hydraulic cylinder test circuit;
--- Improving the internal cleanliness of the hydraulic cylinder.
The standard proposed by China State Shipbuilding Corporation.
This standard by the National Marine Machinery Standardization Technical Committee (SAC/TC137) centralized.
This standard was drafted. China Shipbuilding Technology and Economy Research Institute, China Shipbuilding Industry Corporation Chongqing Hydraulic Electrical Co., China Shipbuilding Heavy Industry
Zhongnan Equipment Co., Ltd. (388 plants), Wuhan Marine Machinery Co., Ltd.
The main drafters of this standard. Wang away, Zheng Xiaobing, Lu Zhiyong, Chen Wensheng, Tang Min, Fan Yong, Cai Zhenzhong.
This standard replaces the standards previously issued as follows.
--- GB/T 13342-1992.
Marine reciprocating hydraulic cylinder General technical conditions
1 Scope
This standard specifies the marine reciprocating cylinder (hereinafter referred to as hydraulic cylinders) requirements, test methods, inspection rules, signs and packaging.
This standard applies to mineral oil-based hydraulic cylinders medium of design, manufacture, testing and acceptance.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 699-1999 quality carbon structural steel
GB/T 786.1 hydropneumatic graphic symbols
GB/T 2879 hydraulic cylinder piston and piston seal groove dimensions and tolerances
GB/T 2880 hydraulic cylinder rod and piston seals for narrow cross-section dimensions and tolerances
GB/T 3098.1-2000 Mechanical properties of fasteners Bolts, screws and studs
GB/T 3323-2005 Metal fusion welded joints radiography
GB/T 3452.1 hydraulic and pneumatic rubber O-rings - Part 1. Dimensions, tolerances
GB/T 3452.2 O-shaped rubber ring appearance quality inspection standards
GB/T 3452.3 hydraulic and pneumatic rubber O-ring groove dimensions
GB/T 5777 seamless steel pipe ultrasonic testing method
GB/T 6402-1991 steel forgings ultrasonic inspection method
GB/T 6577 with the hydraulic cylinder piston seal housings incorporating bearing rings - Dimensions and tolerances
GB/T 6578 with piston rod wipers - Dimensions and tolerances
GB/T 7935 General technical conditions for hydraulic components
GB/T 8162-1999 structural seamless steel pipe
GB/T 8163-1999 Seamless steel tubes
GB/T 14039-2002 Hydraulic fluid level of contamination by solid particles
GB/T 17446 term fluid power systems and components
CB/T 3004 Marine reciprocating cylinder basic parameters
CB/T 3317 Marine piston hydraulic cylinder connected to the basic parameters and installation dimensions
CB/T 3318 Marine double-acting hydraulic cylinder connected to the basic parameters and installation dimensions
JB/T 4730.3-2005 Nondestructive testing of pressure equipments - Part 3. Ultrasonic testing
JB/T 7858 Evaluation Method cleanliness of hydraulic components and hydraulic components Cleanliness Index
3 Terms and Definitions
In GB/T 17446 and established the following terms and definitions apply to this standard.
3.1
The minimum pressure of the hydraulic cylinder starts.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13342-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 13342-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13342-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13342-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13342-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13342-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|