HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 12668.7302-2021 English PDF

US$504.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12668.7302-2021: Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 12668.7302-2021English504 Add to Cart 4 days [Need to translate] Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies Valid GB/T 12668.7302-2021

PDF similar to GB/T 12668.7302-2021


Standard similar to GB/T 12668.7302-2021

GB/T 5959.41   GB/T 37752.1   GB/T 3797   GB/T 12668.7202   GB/T 12668.901   GB/T 12668.902   

Basic data

Standard ID GB/T 12668.7302-2021 (GB/T12668.7302-2021)
Description (Translated English) Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K62
Word Count Estimation 29,252
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 12668.7302-2021: Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies



---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Adjustable speed electrical power drive systems - Part 7-302.Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies ICS 29.200;35.100.05 CCSK62 National Standards of People's Republic of China Speed Control Electric Drive System Part 7-302. General interface and usage specification of electric drive system Type 2 specification corresponds to network technology Released on 2021-10-11 2022-05-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions and abbreviations 1 3.1 Terms and definitions 1 3.2 Abbreviations 7 4 Principles of mapping CIPMotionTM 8 4.1 General principles for mapping CIPMotionTM 8 4.2 Mapping CIPMotionTM 8 4.3 Data Type 9 4.4 I/O connection interface 10 5 Map to DeviceNetTM 14 5.1 Adaptation device model 14 5.2 The use of I/O data format 15 6 Map to ControlNetTM 15 6.1 Adaptation device model 15 6.2 Use of I/O data format 16 7 Map to EtherNet/IPTM 16 7.1 Adaptation device model 16 7.2 The use of I/O data format 18 Reference 19

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is part 7-302 of GB/T 12668 "Speed Adjustable Electric Drive System". GB/T 12668 has released the following parts. ---Part 1.General requirements for the rated value of low-voltage DC speed-regulating electric drive systems; ---Part 2.General requirements for the rated value of low-voltage AC variable frequency electric drive systems; ---Part 3.Electromagnetic compatibility requirements and specific test methods; ---Part 4.Generally require AC voltage above 1000V but not more than 35kV AC speed control electric drive system rating Value provision; ---Part 5-1.Safety requirements for electrical, thermal and energy; ---Part 5-2.Safety requirements function; ---Part 6.Guidelines for determining the type of load working system and the corresponding current rating; ---Part 701.General interface and use specification interface definition of electric drive system; ---Part 7-201.General interface and use specification of electric drive system Type 1 specification description; ---Part 7-301.General interface and use specification of electric drive system, type 1 specification corresponds to network technology; ---Part 7-302.General interface and use specification of electric drive system, type 2 specification corresponds to network technology; ---Part 8.Voltage specification of power interface; ---Part 9-1.Eco-design of electric drive system, motor starter, power electronic equipment and its transmission application adopts extension Product Law (EPA) and Semi-Analytical Model (SAM) formulate general requirements for energy efficiency standards for electric drive equipment; ---Part 9-2.Eco-design of electrical drive systems, motor starters, power electronic equipment and their drive applications Energy efficiency indicators of the system and motor starters. The translation method used in this document is equivalent to IEC 61800-7-302.2015, Part 7-302 of Speed Control Electric Drive System. Electric Drive The general interface and usage specification of the system, type 2 specification corresponds to the network technology. This document was proposed by the China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Power Electronic System and Equipment Standardization Technical Committee (SAC/TC60). Drafting organizations of this document. Tianjin Electric Research Institute Co., Ltd., MCC South (Wuhan) Automation Co., Ltd., Shandong Wanmeng Energy Technology Co., Ltd., Tianjin Tianchuan Electric Control Equipment Testing Co., Ltd., Wolong Electric Group Liaoning Rongxin Electric Drive Co., Ltd., Shenzhen He Wang Electric Co., Ltd., Xi'an Power Electronics Technology Research Institute, Hope Senlan Technology Co., Ltd., China Machinery International Engineering Design Research Institute Co., Ltd., Shanghai Qidian Electric Technology Co., Ltd., Zhejiang Xinfuling Electric Co., Ltd., Beijing ABB Electric Drive System Co., Ltd., Xi'an Qigong Electric Co., Ltd., Shenzhen Inovance Technology Co., Ltd., Shenzhen Baoan Renda Electric Industrial Co., Ltd. The company, Shenzhen Science and Technology Innovation Committee. The main drafters of this document. Chai Qing, Yu Kejun, Zeng Zhiqing, Luo Julong, Ye Gangqiao, Li Taifeng, Zhou Dangsheng, Wang Lianjie, Wei Hongqi, Dong Tianhua, Zhao Qing, Luo Shen, Wang Wei, Cui Haixian, He Renfang, Chen Baoshan, Wen Xiangning, Hou Xilun, Yan Yi, Ji Shiqing, Zhang Jun, Yang Wanlu.

Introduction

0.1 General GB/T 12668 provides a series of general specifications for speed-regulating electric drive systems. It is proposed to be composed of the following parts. ---Part 1.General requirements for the rated value of low-voltage DC speed-regulating electric drive systems. The purpose is to transmit Instead of defining the entire DC electric drive system based on the functional units of each subsystem. ---Part 2.General requirements for the rated value of low-voltage AC variable frequency electric drive systems. The purpose is to pass the electric drive train The performance of the system defines the entire AC electric drive system, not based on the functional units of each subsystem. ---Part 3.Electromagnetic compatibility requirements and specific test methods. The purpose is to specify the electromagnetic compatibility of the electric drive system Require. ---Part 4.Generally require AC voltage above 1000V but not more than 35kV AC speed control electric drive system rating Value provision. The purpose is to give the characteristics of the converter, the topology of the converter and its relationship with the entire AC electric drive system. relation. ---Part 5-1.Safety requirements for electrical, heat and energy. The purpose is to specify the electrical Gas, heat and energy safety requirements. ---Part 5-2.Safety requirements function. The purpose is to stipulate that from the perspective of functional safety, the electric drive system (safety phase Related) design development, integration and verification. --- Part 6.Guidelines for determining the type of load working system and the corresponding current rating. The purpose is to specify the speed control electric drive system In particular, the rated value of its basic drive module provides an alternative method. ---Part 701.General interface and use specification interface definition of electric drive system. The purpose is to specify the electric drive system The application specification, and through the use of the general interface model to illustrate its image in the current communication system. ---Part 7-201.General interface and use specification of electric drive system Type 1 specification description. The purpose is to establish electrical transmission Type 1 specification for dynamic systems. Type 1 specifications can be mapped to different communication network technologies. ---Part 7-202.General interface and use specification of electric drive system Type 2 specification description. The purpose is to establish electrical transmission Type 2 specification for dynamic systems. Type 2 specifications can be mapped to different communication network technologies. ---Part 7-203.General interface and use specification of electric drive system Type 3 specification description. The purpose is to establish electrical transmission Type 3 specification for dynamic systems. Type 3 specifications can be mapped to different communication network technologies. ---Part 7-204.General interface and use specification of electric drive system Type 4 specification description. The purpose is to establish electrical transmission Type 4 specification for dynamic systems. Type 4 specifications can be mapped to different communication network technologies. ---Part 7-301.General interface and use specification of electric drive system Type 1 specification corresponds to network technology. The purpose is Establish the mapping relationship between Type 1 specifications and different network technologies. ---Part 7-302.General interface and use specification of electric drive system Type 2 specification corresponds to network technology. The purpose is Establish the mapping relationship between Type 2 specifications and different network technologies. ---Part 7-303.General interface and use specification of electric drive system Type 3 specification corresponds to network technology. The purpose is Establish the mapping relationship between Type 3 specifications and different network technologies. ---Part 7-304.General interface and use specification of electric drive system Type 4 specification corresponds to network technology. The purpose is Establish the mapping relationship between Type 4 specifications and different network technologies. ---Part 8.Voltage specification of power interface. The purpose is to provide a method to determine the power interface voltage of the electric drive system. ---Part 9-1.Eco-design of electric drive system, motor starter, power electronic equipment and its transmission application adopts extension The Product Law (EPA) and Semi-Analytical Model (SAM) formulate general requirements for energy efficiency standards for electric drive equipment. The purpose is to target All the extended products using the extended product method stipulate the general method of energy efficiency standards. ---Part 9-2.Eco-design of electrical drive systems, motor starters, power electronic equipment and their drive applications Energy efficiency indicators of the system and motor starters. The purpose is to specify the complete set of drive modules of power electronic equipment, electrical drive systems and The energy efficiency index of the motor starter and all the equipment to be driven. This document and GB/T 12668 Part 701, Part 7-201, Part 7-301 and IEC 61800-7-202, IEC 61800-7-203, IEC 61800-7-204, IEC 61800-7-303, and IEC 61800-7-304 jointly provide for electrical drive systems (PDS) protocol set, and use the common interface model to map these protocol sets to the existing communication system. This document and GB/T 12668 Part 701, Part 7-201, Part 7-301 and IEC 61800-7-202, IEC 61800-7-203, IEC 61800-7-204, IEC 61800-7-303, IEC 61800-7-304 jointly describe the control system and electrical transmission A universal interface between dynamic systems. This interface can be embedded in the control system, and the control system itself can also be located on the transmission device (sometimes called As "intelligent transmission" or "intelligent transmission"). A variety of physical interfaces (analog and digital input and output, serial and parallel interfaces, fieldbus and network) can be used. For some applications Field of application (e.g. motion control) and device category (e.g. standard transmission, positioning device), the protocol set based on a specific physical interface has been determined Certainly. The realization of related transmission device and application program interface is proprietary technology, and the difference is very big. This document and GB/T 12668 Part 701, Part 7-201, Part 7-301 and IEC 61800-7-202, IEC 61800-7-203, IEC 61800-7-204, IEC 61800-7-303, IEC 61800-7-304 jointly specify the mapping to the drive protocol set Descriptions of a series of commonly used transmission control functions, parameters, state machines or operating sequences in. This document and GB/T 12668 Part 701, Part 7-201, Part 7-301 and IEC 61800-7-202, IEC 61800-7-203, IEC 61800-7-204, IEC 61800-7-303, IEC 61800-7-304 together provide an access drive system Function and data method, this method does not depend on the used transmission protocol and communication interface. Its goal is to have common functions and objects, It is suitable for general transmission models mapped to different communication interfaces. This allows personnel without any professional knowledge of transmissions to implement in the controller Now general motion control (or speed control or transmission control application). Several reasons for defining a common interface. For manufacturers of transmissions. ---It is easier to support system integrators; ---General terminology, it is easier to describe the transmission function; ---The choice of transmission does not depend on special support. For control device manufacturers. ---The influence of no bus technology; ---Easy device integration; ---Does not depend on the transmission supplier. For system integrators. ---Reduce the workload of device integration; ---There is only one reasonable modeling method; ---Does not depend on bus technology. Designing motion control applications with several different transmissions and specialized control systems requires a lot of work. Understand certain task groups The function definition of the software and the system software programming will consume a lot of project resources. In some cases, transmissions cannot share the same thing 理interface. Some control devices only support one interface, but this interface is not supported by a specific transmission device. On the other hand, the prescribed work Energy blocks and data structures are usually incompatible. To deal with this situation, the system integrator needs to write a special interface program for the application software. It should not be their responsibility. Certain applications require interchangeability of devices or integration of new devices into existing configurations. It also faces various incompatibility Solution. It may not be possible to make a scheme conform to the transmission protocol and also meet the specific requirements of the manufacturer. This will reduce the response Choose the most suitable device and the degree of freedom of the unit for the occasion. This unit will be suitable for a specific physical interface and be supported by the controller at the same time. GB/T 12668.701 is divided into general parts and several appendices as shown in Figure 1.Centralize the transmission protocol in the relevant appendix CiA (4021), CIPMotionTM2), PROFIdrive3) and SERCOS (4) are mapped to common interfaces. The appendix content has been opened The released international network organization or fieldbus organization proposed that these organizations are responsible for the content of the relevant appendices and the use of related trademarks. Type 1, Type 2, Type 3 and Type 4 specifications are in IEC 61800-7-201, IEC 61800-7-202, IEC 61800-7-203 and Described in IEC 61800-7-204. This document describes the type 2 specification (CIP MotionTM) in the network technology DeviceNetTM5), ControlNetTM6) and EtherNet/ IPTM7) mapping. 1) CiA 402 is a registered trademark of CANinAutomation (CiA). This information is provided for the convenience of users of this document, and will not be used by standard publishers. The trademark holder or any of its products constitute a guarantee. Compliance with this document does not require the use of the CiA 402 trademark. To use the CiA 402 trademark, you need to get CiA license. 2) CIPMotionTM is a trademark of ODVA, Inc. This information is provided for the convenience of users of this document, and the standard publisher will not be the trademark holder or Any of its products constitute a guarantee. Compliance with this document does not require the use of the CIPMotionTM trademark. ODVA is required to use the CIPMotionTM trademark, License of Inc. 3) PROFIdrive is PROFIBUS The publisher constitutes a guarantee for the trademark holder or any of its products. Compliance with this document does not require the use of the PROFIdrive trademark. Use PROFIdrive provider Standard needs to get PROFIBUS 4) SERCOS is a trademark of SERCOS International Association. This information is provided for the convenience of the users of this document and will not be held by the standard publisher for the trademark People or any of their commodities constitute a guarantee. Compliance with this document does not require the use of the Sercos trade mark. The use of the SERCOS TM trademark requires the possession of the trademark Permission of the author. 5) DeviceNetTM is a trademark of ODVA, Inc. This information is provided for the convenience of users of this document, and the standard publisher will not be the trademark holder or Any commodity constitutes a guarantee. Compliance with this document does not require the use of the DeviceNetTM trademark. To use the DeviceNetTM trademark, you need to obtain ODVA, Inc. Permission. 6) ControlNetTM is a trademark of ODVA, Inc. This information is provided for the convenience of users of this document, and the standard publisher will not be the trademark holder or Any of its products constitute a guarantee. Compliance with this document does not require the use of the ControlNetTM trademark. The use of the ControlNetTM trademark requires ODVA, License of Inc. 7) EtherNet/IPTM is a trademark of ODVA, Inc. This information is provided for the convenience of users of this document, and the standard publisher will not be the trademark holder or Any of its products constitute a guarantee. Compliance with this document does not require the use of the EtherNet/IPTM trademark. Need to get the EtherNet/IPTM trademark Licensed by ODVA, Inc. 8) CANopen is a registered trademark of CANinAutomation (CiA). This information is provided for the convenience of users of this document. The trademark holder or any of its products constitute a guarantee. Compliance with this document does not require the use of the CANopenTM trademark. To use the CANopenTM trademark, you need to get CiA license. CANopen is a word composed of the acronym of ControlAreaNetwork and open, which can be found in EN50325-4 Usage. 9) CC-LinkIE.FieldNetwork is a registered trademark of Mitsubishi Electric Corporation. This information is provided by the user of this document Conveniently, the standard publisher will not constitute a guarantee for the trademark holder or any of its products. Compliance with this document does not require the use of CC-LinkIE.FieldNet- work trademark. The use of CC-LinkIE's FieldNetwork trademark requires the permission of Mitsubishi Electric Corporation. 10) EPATM is a trademark of SUPCON Group Co., Ltd. This information is provided for the convenience of the users of this document and will not be held by the standard publisher for the trademark People or any of their commodities constitute a guarantee. Compliance with this document does not require the use of the EPATM trademark. The use of EPATM trademarks requires permission from the trademark holder. 11) EtherCAT is a registered trademark of Beckhoff, Verl. This information is provided for the convenience of users of this document and will not be held by the standard publisher for trademarks. Someone or any of their goods constitute a guarantee. Following this document does not require the use of the EtherCAT TM trademark. The use of the EtherCATTM trademark requires a trademark holder Have permission. Part 7-301 of GB/T 12668, IEC 61800-7-303 and IEC 61800-7-304 will clearly state Type 1, Type 3 and Type 4 gauges. Fan in different network technologies (such as CANopen 8), CC-LinkIE 9) field network, EPATM 10), EtherCAT 11), Ethernet Mapping in PowerlinkTM12), PROFIBUS13), PROFINET14) and SERCOS (). 12) EthernetPowerlinkTM is B&R (B Control the use of this trademark. This information is provided for the convenience of users of this document. The product constitutes a guarantee. Compliance with this document does not require the use of the EthernetPowerlinkTM trademark. To use the EthernetPowerlinkTM trademark, you need to get Permission of the trademark holder. 13) PROFIBUS is PROFIBUS The publisher constitutes a guarantee for the trademark holder or any of its products. Compliance with this document does not require the use of the PROFIBUS trademark. Use PROFIBUS Trademark needs to get PROFIBUS 14) PROFINET is PROFIBUS The prospective publisher constitutes a guarantee for the trademark holder or any of its products. Compliance with this document does not require the use of the PROFINET trademark. use PROFINET trademark needs to get PROFIBUS Figure 1 Part 701, Part 7-201, Part 7-301 of this document and GB/T 12668 And the structure of IEC 61800-7-202, IEC 61800-7-203, IEC 61800-7-204, IEC 61800-7-303, IEC 61800-7-304 0.2 Patent statement The issuing agency of this document draws attention to the declaration that when the declaration conforms to this document, the applied patents US7983769 and EP1659465 may be involved. "Motion control network protocol with time stamp, which can realize balanced single-cycle timing and utilization of dynamic data structure" related patents use. The issuing agency of this document has no position on the authenticity, validity and scope of the patent. The patent right holder has promised to the International Electrotechnical Commission (IEC) that he is willing to agree with any applicant on reasonable and non-discriminatory terms and conditions. Negotiations on the licensing of patents will be carried out under the document. The statement of the patent holder has been filed with the International Electrotechnical Commission (IEC). Relevant information can be To obtain through the following contact information. Name of patent holder. [ODVA] Address. ODVA, Inc. 2370EastStadiumBoulevard Please note that in addition to the above-mentioned patents, certain contents of this document may still involve patents. The issuing agency of this document is not responsible for identifying patents responsibility. Speed Control Electric Drive System Part 7-302. General interface and usage specification of electric drive system Type 2 specification corresponds to network technology

1 Scope

This document establishes the mapping relationship between the Type 2 specification (CIPMotionTM) specified in IEC 61800-7-202 corresponding to different network technologies. ---DeviceNetTM (CP2/3), see Chapter 5; ---ControlNetTM (CP2/1), see Chapter 6; ---EtherNet/IPTM (CP2/2), see Chapter 7. The functions described in this document do not ensure functional safety. According to relevant standards, agreements and laws, functional safety requires additional measures.

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 25931-2010 Accurate clock synchronization protocol for network measurement and control system (IEC 61588.2009, IDT) IEC 61158-4-2.2014 Industrial Communication Network Fieldbus Specification Part 4-2.Data Link Layer Protocol Specification Type 2 Type components (Industrialcommunication networks-Fieldbusspecifications-Part 4-2.Data-linklayer protocolspecification-Type2elements) IEC 61158-5-2.2014 Industrial Communication Network Fieldbus Specification Part 5-2.Application Layer Service Definition Type 2 Type Element (Industrialcommunicationnetworks-Fieldbusspecifications-Part 5-2.Applicationlayerservice definition-Type2elements) IEC 61158-6-2.2014 Industrial Communication Network Fieldbus Specification Part 6-2.Application Layer Protocol Specification Type 2 Type Element (Industrialcommunicationnetworks-Fieldbusspecifications-Part 6-2.Applicationlayerprotocol specification-Type2elements) IEC 61800-7-202 Adjustable speed electric drive system Part 7-202.General interface and usage specification of electric drive system 2 Type specification (Adjustablespeedelectricalpowerdrivesystems-Part 7-202.Genericinterfaceanduseof profilesforpowerdrivesystems-Profiletype2specification)

3 Terms and definitions and abbreviations

3.1 Terms and definitions The following terms and definitions apply to this document. 3.1.1 Actualvalue The value of the variable at a given moment. Note. In this document, the actual value is used as the input data of the application control program to monitor the variable (for example, the feedback amount) of the electric drive system (PDS).

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 12668.7302-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 12668.7302-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 12668.7302-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 12668.7302-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.