|
US$399.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12660-2008: Pulps -- Determination of drainability -- Canadian standard freeness method
Status: Valid GB/T 12660: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 12660-2008 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Pulps -- Determination of drainability -- Canadian standard freeness method
| Valid |
GB/T 12660-2008
|
| GB/T 12660-1990 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Pulps--Determination of drainability--Canadian standard freeness method
| Obsolete |
GB/T 12660-1990
|
PDF similar to GB/T 12660-2008
Basic data | Standard ID | GB/T 12660-2008 (GB/T12660-2008) | | Description (Translated English) | Pulps -- Determination of drainability -- Canadian standard freeness method | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y30 | | Classification of International Standard | 85-010 | | Word Count Estimation | 17,184 | | Date of Issue | 2008-08-19 | | Date of Implementation | 2009-05-01 | | Older Standard (superseded by this standard) | GB/T 12660-1990 | | Quoted Standard | GB/T 5399; QB/T 3703; ISO 4094 | | Adopted Standard | ISO 5267-2-2001, MOD | | Regulation (derived from) | National Standard Approval Announcement 2008 No.14 (Total No.127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the method of treatment of a pulp suspension performance measurement. The measurement results with the " Canadian Standard " freeness expressed in units of milliliters. In principle, the method for the determination of the age of the pulp suspension. | GB/T 12660-2008: Pulps -- Determination of drainability -- Canadian standard freeness method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pulps. Determination of drainability. "Canadian Standard" freeness method
ICS 85-010
Y30
National Standards of People's Republic of China
Replacing GB/T 12660-1990
Determination of pulp drainage performance
"Canadian Standard" freeness method
(ISO 5267-2.2001, Pulps-Determinationofdrainability-
Part 2. "Canadianstandard" freenessmethod, MOD)
Posted 2008-08-19
2009-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This revised standard adopts ISO 5267-2.2001 "Determination of pulp drainage performance - Part 2." Canadian Standard "freeness method."
This standard and ISO 5267-2.2001 and its causes differences in Appendix B.
This standard replaces GB/T 12660-1990 "Determination of pulp drainage performance of" Canadian Standard "freeness method."
This standard compared with GB/T 12660-1990, the main changes are as follows.
--- Increased the preamble;
--- Increased principle, Appendix A, Appendix B of the relevant content;
--- In Chapter 6 sets out the entire testing process should use the standard distilled or deionized water;
--- In Chapter 7, the method of calculating the increase in the concentration of the pulp and content.
The standard Appendix C, Appendix D, Appendix E, Appendix F, Appendix G are normative appendices, Appendix A, Appendix B is an informative annex.
The standard proposed by China National Light Industry Council.
The paper industry standard by the National Standardization Committee (SAC/TC141) centralized.
This standard was drafted. Tianjin People's Republic of China Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Guangdong Entry-Exit Inspection and Quarantine
Bureau of China Pulp and Paper Research Institute.
The main drafters of this standard. Li Jian Yong, Zhao Lihua, Zhang Hui, Guo Renhong.
This standard replaces the standards previously issued as follows.
--- GB/T 12660-1990.
The standard National Standardization Technical Committee commissioned the paper industry is responsible for interpretation.
Determination of pulp drainage performance
"Canadian Standard" freeness method
1 Scope
This standard specifies the method of the pulp suspension filtration performance measurement, measurement results with the "Canadian Standard" freeness, said unit
Ml.
In principle, the method is applicable to the determination of various pulp suspension.
Note. The large number of fine fibers on the freeness may cause irregular rise untrue freeness value is generally lower than 100mL.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 5399 pulp slurry concentration measurement (GB/T 5399-2004, ISO 4119.1995, IDT)
QB/T 3703 pulp laboratory sheets prepared by conventional sheet former method
ISO 4094 paper, cardboard, pulp test equipment calibration standards laboratories and internationally accredited laboratories appointment and acceptance
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
After adjusting the temperature and the slurry concentration of the sample volume from the "Canadian Standard" freeness tester side tubes flowing water, expressed in milliliters.
Principle 4
A volume of a pulp suspension, measured fibrous filter layer is formed by drainage sieve, the filtrate flows into a straight tube and having a
Side tube funnel, measuring the volume of filtrate discharged from the side of the tube. The filtrate volume is discharged pulp "Canadian Standard" freeness, milli
Expressed in liters.
5 Instruments
General laboratory instruments and
5.1 "Canadian standard" freeness tester. comply with the provisions of Appendix C.
NOTE. Appendix D describes the "Canadian standard" freeness instrument maintenance, described in detail in Appendix E of the "Canadian standard" freeness instrument calibration method. In addition, with
Appendix E also introduced proofreading laboratory conditions.
5.2 cylinder. the nearest ml, the volume is less than 100mL, measurement error should be less than 1.0mL; volume at 100mL ~ 250mL, measured
Fixed error should be less than 2.0mL; the volume is greater than 250mL, measurement error should be less than 5.0mL.
5.3 Balance. a sense of the amount of 0.01g.
Note. Although the determination of the mass of the filtrate from the side of the tube, with a sense of balance amount of 0.1g is sufficient, but a sense of balance amount should be measured 0.01g slurry concentration.
Preparation 6 samples
6.1 Drainage pulp suspension will be dissolved and affect the pH of the test water solid throughout the trial process should use distilled
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12660-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 12660-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 12660-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12660-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 12660-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12660-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|