|
US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12659-2008: Pulps -- Laboratory beating Jokro mill method
Status: Valid GB/T 12659: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 12659-2008 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Pulps -- Laboratory beating Jokro mill method
| Valid |
GB/T 12659-2008
|
| GB/T 12659-1990 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Pulps--Laboratory beating--Jokro mill method
| Obsolete |
GB/T 12659-1990
|
PDF similar to GB/T 12659-2008
Basic data | Standard ID | GB/T 12659-2008 (GB/T12659-2008) | | Description (Translated English) | Pulps -- Laboratory beating Jokro mill method | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y30 | | Classification of International Standard | 85-010 | | Word Count Estimation | 9,923 | | Date of Issue | 2008-08-19 | | Date of Implementation | 2009-05-01 | | Older Standard (superseded by this standard) | GB/T 12659-1990 | | Quoted Standard | GB/T 462; GB/T 740; GB/T 5399; QB/T 1462 | | Adopted Standard | ISO 5264-3-1979, MOD | | Regulation (derived from) | National Standard Approval Announcement 2008 No.14 (Total No.127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the use Yueke Luo laboratory mill beating methods. This standard applies to all types of pulp. However, for some long pulp fibers, such as linen or cotton linter pulp results, obtained using the present method may be poor. | GB/T 12659-2008: Pulps -- Laboratory beating Jokro mill method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pulps. Laboratory beating Jokro mill method
ICS 85-010
Y30
National Standards of People's Republic of China
Replacing GB/T 12659-1990
Pulp Laboratory beating
(ISO 5264-3. 1979, Pulps-Laboratorybeating-
Part 3. Jokromilmethod, MOD)
Posted 2008-08-19
2009-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This revised standard adopts ISO 5264-3. 1979 "Pulp Laboratory beating - Part 3. Yueke Luo (Jokro) milling."
This standard and ISO 5264-3. 1979 Differences in Appendix B.
This standard replaces GB/T 12659-1990 "pulp mill laboratory beating Yueke Luo law."
This standard compared with GB/T 12659-1990, the main changes are as follows.
--- Increased the preamble;
--- Added Appendix A, Appendix B of the relevant content;
--- Description of some of the original standards based on international standards had been changed.
Appendix C of this standard is a normative appendix, Appendix A, Appendix B is an informative annex.
The standard proposed by China National Light Industry Council.
This standard by the National Standardization Technical Committee of the paper industry.
This standard was drafted. Tianjin People's Republic of China Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Guangdong Entry-Exit Inspection and Quarantine
Bureau of China Pulp and Paper Research Institute.
The main drafters of this standard. Zhao Lihua, Li Jian Yong, Zhang Hui, Guo Renhong.
This standard replaces the standards previously issued as follows.
--- GB/T 12659-1990.
The standard National Standardization Technical Committee commissioned the paper industry is responsible for interpretation.
1 Scope
This standard specifies the use Yueke Luo mill laboratory beating method.
This standard applies to all types of pulp. However, for some long pulp fibers, such as flax pulp or cotton linters, obtained by the method using the knot
Fruit may not work well.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. Cited documents dated, its subsequent
Amendments (excluding corrections) or revised versions are no longer applicable to this standard. However, according to research encourages the parties to the agreement
Study whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 462 paper, board and pulp - Determination of water sample (GB/T 462-2008, ISO 287. 1985, ISO 638.
1978, MOD)
GB/T 740 pulp samples taken (GB/T 740-2003, ISO 7213. 1981, IDT)
GB/T 5399 pulp slurry concentration measurement (GB/T 5399-2004, ISO 4119.1995, IDT)
QB/T 1462 Solutions wet pulp from the laboratory (QB/T 1462-1992, eqv ISO 5263. 1979)
Principle 3
Between the inner wall of the cylindrical tank beating beater roll and grooved, to a predetermined concentration of a certain amount of pulp beating. Beating around the cylindrical tank
Do about the central axis planetary rotation grooved beater roll loosely placed therein.
4 Equipment and aids
Usually the following instruments and laboratory equipment.
4.1 Yueke Luo mill. compliance with Appendix C of.
4.2 Standard dissociation control. compliance QB/T 1462's.
4.3 Balance. The specimen shall be weighed to the nearest 0.1g.
4.4 test water. distilled, deionized water or equivalent purity.
4.5 Buchner funnel.
Preparation 5 samples
In accordance with the provisions of GB/T 740 sampling, measurement of absolute dry matter content of the sample in accordance with the provisions of GB/T 462's.
Remove the equivalent of (16 ± 0.5) g dry pulp samples (should not be cut, and to avoid the use of cut-out pulp edge), if the sample is a pulp
The pulp dryer, flash drying or thick clumps, should be at room temperature, placed in the test water 0.5L (4.4) thoroughly soak 4h or more, so
Sample completely soft. The soaked specimens torn about 25mm × 25mm small pieces, and the excess water removed by filtration. Can not soaked wet slurry
Bubble on dissociation.
6 Test procedure
6.1 Dissociation
The wet pulp samples and test for water dissociation (4.4) into the standard dissociation device (4.2), the added (20 ± 5) ℃ [according to climatic conditions, will
You can use the temperature (25 ± 5) ℃ to time, but it should be stated in the report] of the test water (4.4), bring the total volume (1100 ± 25) mL, which
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12659-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 12659-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 12659-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12659-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 12659-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12659-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|