|
US$184.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1232.4-2017: Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 4: Determination of the Mooney stress-relaxation rate
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1232.4-2017 | English | 184 |
Add to Cart
|
3 days [Need to translate]
|
Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 4: Determination of the Mooney stress-relaxation rate
| Valid |
GB/T 1232.4-2017
|
PDF similar to GB/T 1232.4-2017
Basic data | Standard ID | GB/T 1232.4-2017 (GB/T1232.4-2017) | | Description (Translated English) | Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 4: Determination of the Mooney stress-relaxation rate | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G40 | | Classification of International Standard | 83.060 | | Word Count Estimation | 10,183 | | Date of Issue | 2017-07-12 | | Date of Implementation | 2018-02-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 1232.4-2017: Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 4: Determination of the Mooney stress-relaxation rate
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber, unvulcanized - Determests using a shearing-disc viscometer - Part 4. Determination of the Mooney stress-relaxation rate
ICS 83.060
G40
National Standards of People's Republic of China
Unvulcanized rubber was measured with a disc shear viscometer
Part 4. Determination of stress relaxation rate of Mooney
Rubber, unvulcanized-Determinationsusingashearing-discviscometer-
Part 4. DeterminationoftheMooneystress-relaxationrate
(ISO 289-4..2003, IDT)
2017-07-12 released
2018-02-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
China National Standardization Management Committee released
Foreword
GB/T 1232 "Unvulcanized rubber disc shear viscometer for determination" is divided into the following four parts.
- Part 1. Determination of Mooney viscosity;
- Part 2. Determination of initial vulcanization properties;
- Part 3. Non - filler - based emulsion - filled polymer - based styrene - butadiene rubber.
Part 4. Determination of stress relaxation rate of Mooney.
This part is part 4 of GB/T 1232.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part uses the translation method equivalent to ISO 289-4..2003 "Unvulcanized rubber disc shear viscometer for the determination of the first four
Min. determination of the stress relaxation rate of Mooney ".
This section is proposed by the China Petroleum and Chemical Industry Association.
This part of the National Rubber and Rubber Products Standardization Technical Committee (SAC/TC35) centralized.
This part of the drafting unit. 赛 round Jinyu Group Co., Ltd., Yiwei Yi Rubber Research Institute Co., Ltd., Chaoyang Langma Tire limited liability
Any company, Sinopec Group Asset Management Co., Ltd. Baling Petrochemical Company, Fengshen Tire Co., Ltd., Triangle Tire
Co., Ltd., Shandong Linglong Tire Co., Ltd., Guizhou Tire Co., Ltd., Guangzhou Fengli Rubber Tire Co., Ltd., Hangzhou Chaoyang
Rubber Co., Ltd., Beijing Rubber Industry Research and Design Institute, Beijing Ruida Yu Chen Instrument Co., Ltd., Jiangsu Pearl Testing Machinery Co., Ltd.
Suxin Zhenwei Test Machinery Co., Ltd., Taizhou Gangyang Rubber & Plastic Co., Ltd., Shanghai Farsen Detection Technology Co., Ltd., Beijing University of Chemical Technology, East
City Science and Technology Advisory Service Center.
The main drafters of this part. Yang Wenzhen, Cheng Hongfang, Zhu Yi, Liu Aizin, Li Chunxiang, Miao Yafen, Duan Qingbing, Li Shangying, Ren Shaowen,
In this paper, the effects of different concentrations of N, P, C, N, P, K,
Chen Lei, Bao Dafei, Shen Kehui, Kan Zhijian, Sun Zhiqing, Gong Jianming, Yu Fuxi, Fang Zhijian.
Introduction
The Mooney viscosity, as defined in GB/T 1232.1-2016, is one of the widely accepted rubber characteristics. But only Mooney viscosity
The results can not effectively characterize the other rheological properties of rubber. For example, Mooney viscosity can not reflect the elasticity of raw rubber and unvulcanized rubber
Sign [2]. Viscous and elastic changes are relatively independent, so it is necessary to study a test that can contain two characteristic parameters
process.
The Mooney viscosity test is carried out at a specific shear rate, and the compound exhibits a viscosity associated with the shear rate. Test with shear speed
The varying thickness of the rubber Mooney viscosity required for complex test equipment is already available. In general, the operation of such equipment is complex and the test results are interpreted
Difficult, not suitable as the current standard quality control tool.
As described in [3], the stress relaxation of the Mooney is related to the elastic effect in the unvulcanized rubber rheology. Mooney stress relaxation relative capacity
Easy to measure, and only in the standard Mooney viscosity test after the end of an additional few seconds to be measured. Mooney Stress Relaxation Parameter and
Mooney viscosity independent of each other.
Mooney stress relaxation combined with conventional Mooney viscosity, can better describe the non-kneading and kneading of unvulcanized rubber visco-elastic properties [14].
The Menny stress relaxation test has been recommended as a quality control tool [4] [5].
The Mooney Relaxation Short Time Interval Measurement method described in this section is an improved evaluation procedure. Use short time intervals to evaluate
Compared to long-term intervals, there is a better reproducibility.
A short time interval method can be used in the Mooney stress relaxation test to obtain a rheological properties of the rubber is a major parameter - Mooney stress
Relaxation rate (MSR), that is, the decay rate of torque over time [16] [17] [18] [19].
Mooney stress relaxation rates have also been called "slope", while "slope" is sometimes positive and sometimes negative. The methods described in this section use one
For a specific evaluation interval, the parameter result is always positive and uses a specific name [6] [7] [8] [15].
The data show that, despite the use of short-term evaluation intervals, the method can still distinguish between polymers with different high molecular weight components
(EPDM).
Unvulcanized rubber was measured with a disc shear viscometer
Part 4. Determination of stress relaxation rate of Mooney
1 Scope
This part of GB/T 1232 specifies the use of disc shear viscometer to measure the stress relaxation rate (MSR) of raw or unvulcanized rubber,
The method uses the Mooney viscosity measurement to obtain the elastic response characteristics of the material in addition to the viscous response.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 1232.1-2016 Unseparated rubber disc shear viscometer for determination - Part 1. Determination of Mooney viscosity
(ISO 289-1..2014, IDT)
3 terms and definitions
The following terms and definitions apply to this document.
3.1
Mooney pressure relaxation rate Mooneystress-relaxationrate
MSR
At the end of the Mooney viscosity test, after the rotor is stopped, the logarithm of the logarithmic linear regression curve of the torque and time
On the value.
Note. The Mooney Stress Relaxation Test is a stress relaxation test with a very wide time span. This test shows the structure of the polymer at a specified relaxation time interval
sensitive.
4 principle
This test is a test of the Mooney torque attenuation immediately after the Mooney viscosity test. Mooney viscosity test after the end of the rotor suddenly stopped
Only the rotation, recording torque with the time of the attenuation relationship. In accordance with the theoretical hypothesis of the power law law of validity, in a short time interval to assess the torque change
Rate.
5 equipment
Use the equipment specified and calibrated in GB/T 1232.1-2016. In addition, the device disc should be able to stop in the 0.1s time rotation,
Reset the torque zero point to the static zero for the stationary rotor and record the torque value at least every 0.2 s after the rotor has stopped.
Note 1. The torque zero at the time of rotation and rotation of the rotor is different. It is recommended that the torque zero of the rotating rotor be reset before each measurement. This will also lead to a warm-up
Negative torque signal, as shown in Figure 1.
Note 2. Isolation film is recommended. The type and thickness of the membrane polymer are affected by the results. This part is based on the use of 20μm, DSC peak temperature
Is a polypropylene film of 161 ° C (second heating curve).
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1232.4-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 1232.4-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 1232.4-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1232.4-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|