|
US$344.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1149.4-2021: Internal combustion engines - Piston rings - Part 4: Quality requirements
Status: Valid GB/T 1149.4: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1149.4-2021 | English | 344 |
Add to Cart
|
3 days [Need to translate]
|
Internal combustion engines - Piston rings - Part 4: Quality requirements
| Valid |
GB/T 1149.4-2021
|
| GB/T 1149.4-2008 | English | 599 |
Add to Cart
|
3 days [Need to translate]
|
Internal combustion engines -- Piston rings -- Part 4: Quality requirements
| Obsolete |
GB/T 1149.4-2008
|
| GB/T 1149.4-1994 | English | 519 |
Add to Cart
|
4 days [Need to translate]
|
Internal combustion engines--Piston rings--Quality requirements
| Obsolete |
GB/T 1149.4-1994
|
PDF similar to GB/T 1149.4-2021
Basic data | Standard ID | GB/T 1149.4-2021 (GB/T1149.4-2021) | | Description (Translated English) | Internal combustion engines - Piston rings - Part 4: Quality requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J92 | | Word Count Estimation | 18,116 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 1149.4-2021: Internal combustion engines - Piston rings - Part 4: Quality requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Internal combustion engines - Piston rings - Part 4.Quality requirements
ICS 27.020
J92
National Standards of People's Republic of China
Replace GB/T 1149.4-2008
Internal combustion engine piston ring
Part 4.Quality Requirements
(ISO 6621-5.2013,Internalcombustionengines-Pistonrings-
Released on 2021-03-09
2021-10-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Surface defects 2
4.1 General 2
4.2 Porosity, stomata and blisters 2
4.3 Scratches, indentations, pits and cracks 2
4.4 Edge 3
4.5 Other items inspected only with the naked eye 9
5 Material 10
5.1 Material specifications 10
5.2 The effect of temperature on the disappearance of tangential elasticity 10
6 The height of the protruding surface of the piston ring mark 10
7 Machining of outer circular surface and side surface-deviation from ideal contour and plane of non-design requirements 11
7.1 General 11
7.2 Permissible deviation of the outer circular surface profile 11
7.3 Allowable value of warpage 12
Reference 13
Foreword
GB/T 1149 "Piston Rings for Internal Combustion Engines" is divided into sixteen parts.
---Part 1.General rules;
---Part 2.Terminology;
---Part 3.Material specifications;
---Part 4.Quality requirements;
---Part 5.Inspection methods;
---Part 6.Cast iron scraper;
---Part 7.Rectangular cast iron ring;
---Part 8.Rectangular steel ring;
---Part 9.Trapezoidal cast iron ring;
---Part 10.Trapezoidal steel ring;
---Part 11.Wedge-shaped cast iron ring;
---Part 12.Wedge-shaped steel ring;
---Part 13.Oil ring;
---Part 14.Spiral spring oil ring;
---Part 15.Thin cast iron spiral spring oil ring;
---Part 16.Steel belt combination oil ring.
This part is Part 4 of GB/T 1149.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 1149.4-2008 "Piston Rings for Internal Combustion Engines Part 4.Quality Requirements", and GB/T 1149.4-2008
In comparison, with the exception of editorial changes, the main technical changes are as follows.
---Modified the scope of application and added a steel spiral spring oil ring (see Chapter 1, Chapter 1 of the.2008 edition);
---The normative reference document ISO 6626-3 "Piston Rings for Internal Combustion Engines Part 3.Steel Coil Spring Oil Rings" has been added (see Section 2
chapter);
---The requirements for the chrome-plated chrome-plated outer surface are modified (see 4.5.4, 4.5.4 of the.2008 edition);
---Added the requirements of the radial offset tolerance of the oil scraper edge of the SF type spiral spring oil ring specified in ISO 6626-3 (see 7.2.5);
---Standardize the expression in the chart (see the full text chart).
The translation method used in this section is equivalent to ISO 6621-5.2013 "Piston Rings for Internal Combustion Engines Part 5.Quality Requirements".
The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows.
---GB/T 1149.1-2008 Internal Combustion Engine Piston Ring Part 1.General Rules (ISO 6621-4.2003, IDT)
---GB/T 1149.2-2010 Internal combustion engine piston ring Part 2.Terminology (ISO 6621-1.2007, IDT)
---GB/T 1149.3-2010 Internal combustion engine piston ring Part 3.Material specification (ISO 6621-3.2000, IDT)
---GB/T 1149.6-2008 internal combustion engine piston ring part 6.cast iron scraper ring (ISO 6623.2004, IDT)
---GB/T 1149.7-2010 Internal combustion engine piston ring Part 7.Rectangular cast iron ring (ISO 6622-1.2003, IDT)
---GB/T 1149.8-2008 Internal Combustion Engine Piston Ring Part 8.Rectangular Steel Ring (ISO 6622-2.2003, IDT)
---GB/T 1149.9-2008 Internal combustion engine piston ring Part 9.Trapezoidal cast iron ring (ISO 6624-1.2001, IDT)
---GB/T 1149.10-2013 Internal combustion engine piston ring Part 10.Trapezoidal steel ring (ISO 6624-3.2001, IDT)
---GB/T 1149.11-2010 Piston rings for internal combustion engines Part 11.Wedge-shaped cast iron rings (ISO 6624-2.2003, IDT)
---GB/T 1149.12-2013 Piston rings for internal combustion engines Part 12.Wedge-shaped steel rings (ISO 6624-4.2003, IDT)
---GB/T 1149.13-2008 Internal Combustion Engine Piston Ring Part 13.Oil Ring (ISO 6625.1986, IDT)
---GB/T 1149.14-2008 internal combustion engine piston ring part 14.spiral spring oil ring (ISO 6626.1989, IDT)
---GB/T 1149.15-2017 Piston rings for internal combustion engines Part 15.Thin cast iron spiral spring oil rings (ISO 6626-2.
2013, IDT)
---GB/T 1149.16-2015 Piston ring for internal combustion engine Part 16.Steel belt combined oil ring (ISO 6627.2011, IDT)
This section has made the following editorial changes.
---Modified the part number in the standard name.
This part was proposed by China Machinery Industry Federation.
This part is under the jurisdiction of the National Internal Combustion Engine Standardization Technical Committee (SAC/TC177).
Drafting organizations of this section. Anqing Di Booz Piston Ring Co., Ltd., Fujian East Asia Machinery Co., Ltd., Yizheng ASIMCO Double Ring Piston Ring
Co., Ltd., Nanjing Feiyan Piston Ring Co., Ltd., Shandong Hengyuan Precision Parts Co., Ltd., Shanghai Internal Combustion Engine Research Institute Co., Ltd.
Ren company, Anhui Quanchai Power Co., Ltd.
The main drafters of this section. Wang Xing, Ji Binjie, He Zhaojun, Zhang Yi, Liu Zusong, Zhong Junjie, Qiao Liangliang, Wang Zhiyi.
The previous releases of the standards replaced by this part are as follows.
---GB/T 1149.4-2008, GB/T 1149.4-1994;
---GB 1149-1982.
Internal combustion engine piston ring
Part 4.Quality Requirements
1 Scope
This part of GB/T 1149 specifies product quality requirements that are not usually expressed in technical requirements on drawings.
This section applies to the following piston rings.
---Integral cast iron ring or steel compression ring;
---Combined piston ring (oil ring), composed of cast iron parts and spring parts;
---Single type and combined steel oil ring, namely steel spiral spring oil ring and steel belt combined oil ring.
This part supplements the limits of some quality characteristics stipulated in the inspection method standard (ISO 6621-2), and also stipulates those that have not been
The quality characteristics of recognized quantitative inspection methods, such as surface defects, require normal vision (or wearing corrective glasses) to be inspected without
With the help of any magnifying device. These quality characteristics specified in this part are for the various types of piston ring rings specified in other parts of GB/T 1149.
Complement of quality characteristics such as height, radial thickness and closed gap tolerance.
This section does not specify the acceptable quality level value (AQL), which shall be agreed upon by both parties in accordance with ISO 2859 when necessary.
This part specifies the quality requirements for reciprocating internal combustion engine piston rings used for road vehicles and other purposes, and applies to cylinder diameters ranging from
Piston rings of 30mm~200mm.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
ISO 6621-1 Piston rings for internal combustion engines Part 1.Terminology (Internalcombustionengines-Pistonrings-Part
1.Vocabulary)
ISO 6621-3 Piston Rings for Internal Combustion Engines Part 3.Material Specification (Internalcombustionengines-Pistonrings-
Part 3.Materialspecifications)
ISO 6622 (alparts) Internal combustion engines-Pistonrings
ISO 6623 Internal combustion engines-Pistonrings-Scraper
ringsmadeofcastiron)
ISO 6624(alparts) Internal combustion engines-Pistonrings
ISO 6625 Internal combustion engines-Pistonrings-Oilcontrol
rings)
ISO 6626 Internal combustion engines-Pistonrings-Coil-
spring-loadedoilcontrolrings)
ISO 6626-2 Internal combustion engine piston ring Part 2.Thin cast iron spiral spring oil ring (Internalcombustionengines-
Pistonrings-Part 2.Coil-spring-loadedoilcontrolringsofnarrowwidthmadeofcastiron)
ISO 6626-3 Piston Rings for Internal Combustion Engines Part 3.Steel Coil Spring Oil Rings (Internalcombustionengines-
Pistonrings-Part 3.Coil-spring-loadedoilcontrolringsmadeofsteel)
ISO 6627 internal combustion engine piston ring steel belt combination oil ring (Internalcombustionengines-Pistonrings-Ex-
pander/segmentoil-controlrings)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1149.4-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 1149.4-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 1149.4-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1149.4-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 1149.4-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1149.4-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|