|
US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11185-2009: Paints and varnishes -- Bend test (conical mandrel)
Status: Valid GB/T 11185: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 11185-2009 | English | 194 |
Add to Cart
|
3 days [Need to translate]
|
Paints and varnishes -- Bend test (conical mandrel)
| Valid |
GB/T 11185-2009
|
| GB/T 11185-1989 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Bend test for coating (canical mandrel)
| Obsolete |
GB/T 11185-1989
|
PDF similar to GB/T 11185-2009
Basic data | Standard ID | GB/T 11185-2009 (GB/T11185-2009) | | Description (Translated English) | Paints and varnishes -- Bend test (conical mandrel) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G50 | | Classification of International Standard | 87.040 | | Word Count Estimation | 10,149 | | Date of Issue | 2009-06-02 | | Date of Implementation | 2010-02-01 | | Older Standard (superseded by this standard) | GB/T 11185-1989 | | Quoted Standard | GB/T 3186; GB/T 9271; GB/T 13452.2; GB/T 20777 | | Adopted Standard | ISO 6860-2006, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 8, 2009 (No. 148 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies a test method to assess empirical paint, varnish or related products under standard conditions of the coating around the tapered shaft bending resistance to cracking or peeling from the substrate resistance performance. For multi- coating system, you can try each test each coating or the entire coating system. | GB/T 11185-2009: Paints and varnishes -- Bend test (conical mandrel)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Paints and varnishes. Bend test (conical mandrel)
ICS 87.040
G50
National Standards of People's Republic of China
GB/T 11185-2009/ISO 6860.2006
Replacing GB/T 11185-1989
Paints and varnishes bend test (cone axis)
(ISO 6860.2006, IDT)
Posted 2009-06-02
2010-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is equivalent to international standards ISO 6860.2006 "Paints and varnishes bending test (cone axis)" (in English).
This standard is equivalent translation ISO 6860.2006.
For ease of use, this standard editorial changes as follows.
--- Use the "standard" instead of "this International Standard";
--- Delete international standards foreword.
This standard replaces GB/T 11185-1989 "film bending test (cone axis)."
The previous version of Standard GB/T 11185-1989 main technical differences are as follows.
--- The previous version is equivalent to using ISO 6860. 1984, this revision is identical with ISO 6860.2006;
Length --- shaft diameter, cone by a fixed value to a range more in line with the actual situation;
--- Test board size from 100mm × 180mm to 75mm × 150mm;
--- This standard specifies observed with 10 times the magnifying glass coatings, agreed also be visually observed, the previous version of the provision on the contrary, that provision with meat
Eye observation, it was agreed also be used 10 times a magnifying glass;
--- Improve the accuracy of the results, the results of this standard is accurate to mm, the previous version of cm;
--- Increasing the precision of the data.
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Standardization Technical Committee paint pigment.
This standard was drafted. CNOOC Changzhou coating Chemical Research Institute.
The main drafters of this standard. Zhengguo Juan.
This standard replaces the standards previously issued as follows.
--- GB/T 11185-1989.
GB/T 11185-2009/ISO 6860.2006
Paints and varnishes bend test (cone axis)
1 Scope
This standard specifies the test method to evaluate the empirical paint, varnish or coating related products under standard conditions around the tapered shaft
Resistance to cracking or peel from the substrate performance bending.
For multi-coating system, the coating can be tested separately for each test or the entire coating system.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3186 Paints, varnishes and raw materials for paints and varnishes - Sampling (GB/T 3186-2006, ISO 15528.2000, IDT)
GB/T 9271 Paints and varnishes - Standard panels for (GB/T 9271-2008, ISO 1514.2004, MOD)
GB/T 13452.2 Paints and varnishes - Determination of film thickness (GB/T 13452.2-2008, ISO 2808.2007, IDT)
GB/T 20777 Paints and varnishes examination and preparation of samples (GB/T 20777-2006, ISO 1513.1992, IDT)
3 Instrument
Suitable apparatus shown in Fig.
Tapered shaft horizontally mounted on a base. With a lever to make the test panel around the cone axis bending operation lever, instrument comes
A clamping device for test panels.
Figure 1 a schematic view of a tapered shaft Tester
GB/T 11185-2009/ISO 6860.2006
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11185-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 11185-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 11185-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11185-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 11185-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11185-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|